From: Nicholas Kazlauskas <nicholas.kazlauskas@xxxxxxx>
[Why]
We should never apply a minimum dispclk value while in prepare_bandwidth
or while displays are active. This is always an optimization for when
all displays are disabled.
[How]
Defer dispclk optimization until safe_to_lower = true and display_count
reaches 0.
Since 0 has a special value in this logic (ie. no dispclk required)
we also need adjust the logic that clamps it for the actual request
to PMFW.
Reviewed-by: Gabe Teeger <gabe.teeger@xxxxxxx>
Reviewed-by: Leo Chen <leo.chen@xxxxxxx>
Reviewed-by: Syed Hassan <syed.hassan@xxxxxxx>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@xxxxxxx>
Signed-off-by: Roman Li <roman.li@xxxxxxx>
---
.../amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c
index 56800c573a71..df29d28d89c9 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c
@@ -467,14 +467,19 @@ void dcn35_update_clocks(struct clk_mgr *clk_mgr_base,
update_dppclk = true;
}
- if (should_set_clock(safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz)) {
+ if (should_set_clock(safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) &&
+ (new_clocks->dispclk_khz > 0 || (safe_to_lower && display_count == 0))) {
+ int requested_dispclk_khz = new_clocks->dispclk_khz;
+
dcn35_disable_otg_wa(clk_mgr_base, context, safe_to_lower, true);
- if (dc->debug.min_disp_clk_khz > 0 && new_clocks->dispclk_khz < dc->debug.min_disp_clk_khz)
- new_clocks->dispclk_khz = dc->debug.min_disp_clk_khz;
+ /* Clamp the requested clock to PMFW based on their limit. */
+ if (dc->debug.min_disp_clk_khz > 0 && requested_dispclk_khz < dc->debug.min_disp_clk_khz)
+ requested_dispclk_khz = dc->debug.min_disp_clk_khz;
+ dcn35_smu_set_dispclk(clk_mgr, requested_dispclk_khz);
clk_mgr_base->clks.dispclk_khz = new_clocks->dispclk_khz;
- dcn35_smu_set_dispclk(clk_mgr, clk_mgr_base->clks.dispclk_khz);
+
dcn35_disable_otg_wa(clk_mgr_base, context, safe_to_lower, false);
update_dispclk = true;
--
2.34.1
