update the driver-fw interface file for smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@xxxxxxx>
---
.../swsmu/inc/pmfw_if/smu14_driver_if_v14_0.h | 132 +++++++++++-------
drivers/gpu/drm/amd/pm/swsmu/inc/smu_v14_0.h | 2 +-
2 files changed, 85 insertions(+), 49 deletions(-)
diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0.h
index ee457a6f0813..c2fd0a4a13e5 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0.h
+++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0.h
@@ -25,7 +25,7 @@
#define SMU14_DRIVER_IF_V14_0_H
//Increment this version if SkuTable_t or BoardTable_t change
-#define PPTABLE_VERSION 0x18
+#define PPTABLE_VERSION 0x1B
#define NUM_GFXCLK_DPM_LEVELS 16
#define NUM_SOCCLK_DPM_LEVELS 8
@@ -145,7 +145,7 @@ typedef enum {
} FEATURE_BTC_e;
// Debug Overrides Bitmask
-#define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_VCN_FCLK 0x00000001
+#define DEBUG_OVERRIDE_NOT_USE 0x00000001
#define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_DCN_FCLK 0x00000002
#define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_MP0_FCLK 0x00000004
#define DEBUG_OVERRIDE_DISABLE_VOLT_LINK_VCN_DCFCLK 0x00000008
@@ -161,6 +161,7 @@ typedef enum {
#define DEBUG_OVERRIDE_ENABLE_SOC_VF_BRINGUP_MODE 0x00002000
#define DEBUG_OVERRIDE_ENABLE_PER_WGP_RESIENCY 0x00004000
#define DEBUG_OVERRIDE_DISABLE_MEMORY_VOLTAGE_SCALING 0x00008000
+#define DEBUG_OVERRIDE_DFLL_BTC_FCW_LOG 0x00010000
// VR Mapping Bit Defines
#define VR_MAPPING_VR_SELECT_MASK 0x01
@@ -391,6 +392,21 @@ typedef struct {
EccInfo_t EccInfo[24];
} EccInfoTable_t;
+#define EPCS_HIGH_POWER 600
+#define EPCS_NORMAL_POWER 450
+#define EPCS_LOW_POWER 300
+#define EPCS_SHORTED_POWER 150
+#define EPCS_NO_BOOTUP 0
+
+typedef enum{
+ EPCS_SHORTED_LIMIT,
+ EPCS_LOW_POWER_LIMIT,
+ EPCS_NORMAL_POWER_LIMIT,
+ EPCS_HIGH_POWER_LIMIT,
+ EPCS_NOT_CONFIGURED,
+ EPCS_STATUS_COUNT,
+} EPCS_STATUS_e;
+
//D3HOT sequences
typedef enum {
BACO_SEQUENCE,
@@ -662,7 +678,7 @@ typedef enum {
} PP_GRTAVFS_FW_SEP_FUSE_e;
#define PP_NUM_RTAVFS_PWL_ZONES 5
-
+#define PP_NUM_PSM_DIDT_PWL_ZONES 3
// VBIOS or PPLIB configures telemetry slope and offset. Only slope expected to be set for SVI3
// Slope Q1.7, Offset Q1.2
@@ -746,10 +762,10 @@ typedef struct {
uint16_t Padding;
//Frequency changes
- int16_t GfxclkFmin; // MHz
- int16_t GfxclkFmax; // MHz
- uint16_t UclkFmin; // MHz
- uint16_t UclkFmax; // MHz
+ int16_t GfxclkFoffset;
+ uint16_t Padding1;
+ uint16_t UclkFmin;
+ uint16_t UclkFmax;
uint16_t FclkFmin;
uint16_t FclkFmax;
@@ -770,19 +786,23 @@ typedef struct {
uint8_t MaxOpTemp;
uint8_t AdvancedOdModeEnabled;
- uint8_t Padding1[3];
+ uint8_t Padding2[3];
uint16_t GfxVoltageFullCtrlMode;
uint16_t SocVoltageFullCtrlMode;
uint16_t GfxclkFullCtrlMode;
uint16_t UclkFullCtrlMode;
uint16_t FclkFullCtrlMode;
- uint16_t Padding2;
+ uint16_t Padding3;
int16_t GfxEdc;
int16_t GfxPccLimitControl;
- uint32_t Spare[10];
+ uint16_t GfxclkFmaxVmax;
+ uint8_t GfxclkFmaxVmaxTemperature;
+ uint8_t Padding4[1];
+
+ uint32_t Spare[9];
uint32_t MmHubPadding[8]; // SMU internal use. Adding here instead of external as a workaround
} OverDriveTable_t;
@@ -802,8 +822,8 @@ typedef struct {
uint16_t VddSocVmax;
//gfxclk
- int16_t GfxclkFmin; // MHz
- int16_t GfxclkFmax; // MHz
+ int16_t GfxclkFoffset;
+ uint16_t Padding;
//uclk
uint16_t UclkFmin; // MHz
uint16_t UclkFmax; // MHz
@@ -828,7 +848,7 @@ typedef struct {
uint8_t FanZeroRpmEnable;
//temperature
uint8_t MaxOpTemp;
- uint8_t Padding[2];
+ uint8_t Padding1[2];
//Full Ctrl
uint16_t GfxVoltageFullCtrlMode;
@@ -839,7 +859,7 @@ typedef struct {
//EDC
int16_t GfxEdc;
int16_t GfxPccLimitControl;
- int16_t Padding1;
+ int16_t Padding2;
uint32_t Spare[5];
} OverDriveLimits_t;
@@ -987,8 +1007,9 @@ typedef struct {
uint16_t BaseClockDc;
uint16_t GameClockDc;
uint16_t BoostClockDc;
-
- uint32_t Reserved[4];
+ uint16_t MaxReportedClock;
+ uint16_t Padding;
+ uint32_t Reserved[3];
} DriverReportedClocks_t;
typedef struct {
@@ -1132,7 +1153,7 @@ typedef struct {
uint32_t DcModeMaxFreq [PPCLK_COUNT ]; // In MHz
uint16_t GfxclkAibFmax;
- uint16_t GfxclkFreqCap;
+ uint16_t GfxDpmPadding;
//GFX Idle Power Settings
uint16_t GfxclkFgfxoffEntry; // Entry in RLC stage (PLL), in Mhz
@@ -1172,8 +1193,7 @@ typedef struct {
uint32_t DvoFmaxLowScaler; //Unitless float
// GFX DCS
- uint16_t DcsGfxOffVoltage; //Voltage in mV(Q2) applied to VDDGFX when entering DCS GFXOFF phase
- uint16_t PaddingDcs;
+ uint32_t PaddingDcs;
uint16_t DcsMinGfxOffTime; //Minimum amount of time PMFW shuts GFX OFF as part of GFX DCS phase
uint16_t DcsMaxGfxOffTime; //Maximum amount of time PMFW can shut GFX OFF as part of GFX DCS phase at a stretch.
@@ -1205,8 +1225,7 @@ typedef struct {
uint16_t DalDcModeMaxUclkFreq;
uint8_t PaddingsMem[2];
//FCLK Section
- uint16_t FclkDpmDisallowPstateFreq; //Frequency which FW will target when indicated that display config cannot support P-state. Set to 0 use FW calculated value
- uint16_t PaddingFclk;
+ uint32_t PaddingFclk;
// Link DPM Settings
uint8_t PcieGenSpeed[NUM_LINK_LEVELS]; ///< 0:PciE-gen1 1:PciE-gen2 2:PciE-gen3 3:PciE-gen4 4:PciE-gen5
@@ -1215,12 +1234,19 @@ typedef struct {
// SECTION: VDD_GFX AVFS
uint8_t OverrideGfxAvfsFuses;
- uint8_t GfxAvfsPadding[3];
+ uint8_t GfxAvfsPadding[1];
+ uint16_t DroopGBStDev;
uint32_t SocHwRtAvfsFuses[PP_GRTAVFS_HW_FUSE_COUNT]; //new added for Soc domain
uint32_t GfxL2HwRtAvfsFuses[PP_GRTAVFS_HW_FUSE_COUNT]; //see fusedoc for encoding
//uint32_t GfxSeHwRtAvfsFuses[PP_GRTAVFS_HW_FUSE_COUNT];
- uint32_t spare_HwRtAvfsFuses[PP_GRTAVFS_HW_FUSE_COUNT];
+
+ uint16_t PsmDidt_Vcross[PP_NUM_PSM_DIDT_PWL_ZONES-1];
+ uint32_t PsmDidt_StaticDroop_A[PP_NUM_PSM_DIDT_PWL_ZONES];
+ uint32_t PsmDidt_StaticDroop_B[PP_NUM_PSM_DIDT_PWL_ZONES];
+ uint32_t PsmDidt_DynDroop_A[PP_NUM_PSM_DIDT_PWL_ZONES];
+ uint32_t PsmDidt_DynDroop_B[PP_NUM_PSM_DIDT_PWL_ZONES];
+ uint32_t spare_HwRtAvfsFuses[19];
uint32_t SocCommonRtAvfs[PP_GRTAVFS_FW_COMMON_FUSE_COUNT];
uint32_t GfxCommonRtAvfs[PP_GRTAVFS_FW_COMMON_FUSE_COUNT];
@@ -1246,11 +1272,7 @@ typedef struct {
uint32_t dGbV_dT_vmin;
uint32_t dGbV_dT_vmax;
- //Unused: PMFW-9370
- uint32_t V2F_vmin_range_low;
- uint32_t V2F_vmin_range_high;
- uint32_t V2F_vmax_range_low;
- uint32_t V2F_vmax_range_high;
+ uint32_t PaddingV2F[4];
AvfsDcBtcParams_t DcBtcGfxParams;
QuadraticInt_t SSCurve_GFX;
@@ -1327,18 +1349,18 @@ typedef struct {
uint16_t PsmDidtReleaseTimer;
uint32_t PsmDidtStallPattern; //Will be written to both pattern 1 and didt_static_level_prog
// CAC EDC
- uint32_t Leakage_C0; // in IEEE float
- uint32_t Leakage_C1; // in IEEE float
- uint32_t Leakage_C2; // in IEEE float
- uint32_t Leakage_C3; // in IEEE float
- uint32_t Leakage_C4; // in IEEE float
- uint32_t Leakage_C5; // in IEEE float
- uint32_t GFX_CLK_SCALAR; // in IEEE float
- uint32_t GFX_CLK_INTERCEPT; // in IEEE float
- uint32_t GFX_CAC_M; // in IEEE float
- uint32_t GFX_CAC_B; // in IEEE float
- uint32_t VDD_GFX_CurrentLimitGuardband; // in IEEE float
- uint32_t DynToTotalCacScalar; // in IEEE
+ uint32_t CacEdcCacLeakageC0;
+ uint32_t CacEdcCacLeakageC1;
+ uint32_t CacEdcCacLeakageC2;
+ uint32_t CacEdcCacLeakageC3;
+ uint32_t CacEdcCacLeakageC4;
+ uint32_t CacEdcCacLeakageC5;
+ uint32_t CacEdcGfxClkScalar;
+ uint32_t CacEdcGfxClkIntercept;
+ uint32_t CacEdcCac_m;
+ uint32_t CacEdcCac_b;
+ uint32_t CacEdcCurrLimitGuardband;
+ uint32_t CacEdcDynToTotalCacRatio;
// GFX EDC XVMIN
uint32_t XVmin_Gfx_EdcThreshScalar;
uint32_t XVmin_Gfx_EdcEnableFreq;
@@ -1467,7 +1489,7 @@ typedef struct {
uint8_t VddqOffEnabled;
uint8_t PaddingUmcFlags[2];
- uint32_t PostVoltageSetBacoDelay; // in microseconds. Amount of time FW will wait after power good is established or PSI0 command is issued
+ uint32_t Paddign1;
uint32_t BacoEntryDelay; // in milliseconds. Amount of time FW will wait to trigger BACO entry after receiving entry notification from OS
uint8_t FuseWritePowerMuxPresent;
@@ -1530,7 +1552,7 @@ typedef struct {
int16_t FuzzyFan_ErrorSetDelta;
int16_t FuzzyFan_ErrorRateSetDelta;
int16_t FuzzyFan_PwmSetDelta;
- uint16_t FuzzyFan_Reserved;
+ uint16_t FanPadding2;
uint16_t FwCtfLimit[TEMP_COUNT];
@@ -1547,9 +1569,10 @@ typedef struct {
uint16_t FanSpare[1];
uint8_t FanIntakeSensorSupport;
uint8_t FanIntakePadding;
- uint32_t FanAmbientPerfBoostThreshold;
uint32_t FanSpare2[12];
+ uint32_t ODFeatureCtrlMask;
+
uint16_t TemperatureLimit_Hynix; // In degrees Celsius. Memory temperature limit associated with Hynix
uint16_t TemperatureLimit_Micron; // In degrees Celsius. Memory temperature limit associated with Micron
uint16_t TemperatureFwCtfLimit_Hynix;
@@ -1637,7 +1660,7 @@ typedef struct {
uint16_t AverageDclk0Frequency ;
uint16_t AverageVclk1Frequency ;
uint16_t AverageDclk1Frequency ;
- uint16_t PCIeBusy ;
+ uint16_t AveragePCIeBusy ;
uint16_t dGPU_W_MAX ;
uint16_t padding ;
@@ -1665,12 +1688,12 @@ typedef struct {
uint16_t AverageGfxActivity ;
uint16_t AverageUclkActivity ;
- uint16_t Vcn0ActivityPercentage ;
+ uint16_t AverageVcn0ActivityPercentage;
uint16_t Vcn1ActivityPercentage ;
uint32_t EnergyAccumulator;
uint16_t AverageSocketPower;
- uint16_t MovingAverageTotalBoardPower;
+ uint16_t AverageTotalBoardPower;
uint16_t AvgTemperature[TEMP_COUNT];
uint16_t AvgTemperatureFanIntake;
@@ -1684,7 +1707,8 @@ typedef struct {
uint8_t ThrottlingPercentage[THROTTLER_COUNT];
- uint8_t padding1[3];
+ uint8_t VmaxThrottlingPercentage;
+ uint8_t padding1[2];
//metrics for D3hot entry/exit and driver ARM msgs
uint32_t D3HotEntryCountPerMode[D3HOT_SEQUENCE_COUNT];
@@ -1693,7 +1717,7 @@ typedef struct {
uint16_t ApuSTAPMSmartShiftLimit;
uint16_t ApuSTAPMLimit;
- uint16_t MovingAvgApuSocketPower;
+ uint16_t AvgApuSocketPower;
uint16_t AverageUclkActivity_MAX;
@@ -1823,6 +1847,17 @@ typedef struct {
#define TABLE_TRANSFER_FAILED 0xFF
#define TABLE_TRANSFER_PENDING 0xAB
+#define TABLE_PPT_FAILED 0x100
+#define TABLE_TDC_FAILED 0x200
+#define TABLE_TEMP_FAILED 0x400
+#define TABLE_FAN_TARGET_TEMP_FAILED 0x800
+#define TABLE_FAN_STOP_TEMP_FAILED 0x1000
+#define TABLE_FAN_START_TEMP_FAILED 0x2000
+#define TABLE_FAN_PWM_MIN_FAILED 0x4000
+#define TABLE_ACOUSTIC_TARGET_RPM_FAILED 0x8000
+#define TABLE_ACOUSTIC_LIMIT_RPM_FAILED 0x10000
+#define TABLE_MGPU_ACOUSTIC_TARGET_RPM_FAILED 0x20000
+
// Table types
#define TABLE_PPTABLE 0
#define TABLE_COMBO_PPTABLE 1
@@ -1849,5 +1884,6 @@ typedef struct {
#define IH_INTERRUPT_CONTEXT_ID_THERMAL_THROTTLING 0x7
#define IH_INTERRUPT_CONTEXT_ID_FAN_ABNORMAL 0x8
#define IH_INTERRUPT_CONTEXT_ID_FAN_RECOVERY 0x9
+#define IH_INTERRUPT_CONTEXT_ID_DYNAMIC_TABLE 0xA
#endif
diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v14_0.h b/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v14_0.h
index 46b456590a08..727d5b405435 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v14_0.h
+++ b/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v14_0.h
@@ -28,7 +28,7 @@
#define SMU14_DRIVER_IF_VERSION_INV 0xFFFFFFFF
#define SMU14_DRIVER_IF_VERSION_SMU_V14_0_0 0x7
#define SMU14_DRIVER_IF_VERSION_SMU_V14_0_1 0x6
-#define SMU14_DRIVER_IF_VERSION_SMU_V14_0_2 0x26
+#define SMU14_DRIVER_IF_VERSION_SMU_V14_0_2 0x2E
#define FEATURE_MASK(feature) (1ULL << feature)
--
2.34.1
