[PATCH 3/3] GPU-DRM-Radeon: Use seq_puts() in r100_debugfs_cp_csq_fifo()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
Date: Tue, 2 May 2017 21:54:49 +0200

Strings which did not contain data format specifications should be put
into a sequence. Thus use the corresponding function "seq_puts".

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring at users.sourceforge.net>
---
 drivers/gpu/drm/radeon/r100.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index c31e660e35db..09b88738aa07 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -2992,19 +2992,19 @@ static int r100_debugfs_cp_csq_fifo(struct seq_file *m, void *data)
 	seq_printf(m, "Indirect2 wptr %u\n", ib2_wptr);
 	/* FIXME: 0, 128, 640 depends on fifo setup see cp_init_kms
 	 * 128 = indirect1_start * 8 & 640 = indirect2_start * 8 */
-	seq_printf(m, "Ring fifo:\n");
+	seq_puts(m, "Ring fifo:\n");
 	for (i = 0; i < 256; i++) {
 		WREG32(RADEON_CP_CSQ_ADDR, i << 2);
 		tmp = RREG32(RADEON_CP_CSQ_DATA);
 		seq_printf(m, "rfifo[%04d]=0x%08X\n", i, tmp);
 	}
-	seq_printf(m, "Indirect1 fifo:\n");
+	seq_puts(m, "Indirect1 fifo:\n");
 	for (i = 256; i <= 512; i++) {
 		WREG32(RADEON_CP_CSQ_ADDR, i << 2);
 		tmp = RREG32(RADEON_CP_CSQ_DATA);
 		seq_printf(m, "ib1fifo[%04d]=0x%08X\n", i, tmp);
 	}
-	seq_printf(m, "Indirect2 fifo:\n");
+	seq_puts(m, "Indirect2 fifo:\n");
 	for (i = 640; i < ib1_wptr; i++) {
 		WREG32(RADEON_CP_CSQ_ADDR, i << 2);
 		tmp = RREG32(RADEON_CP_CSQ_DATA);
-- 
2.12.2



[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux