On 7/16/24 11:33 AM, Alex Deucher wrote:
This reverts commit bc87d666c05a13e6d4ae1ddce41fc43d2567b9a2 and the
register changes from commit 6d4279cb99ac4f51d10409501d29969f687ac8dc.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3478
Cc: mikhail.v.gavrilov@xxxxxxxxx
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@xxxxxxx>
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
.../drm/amd/display/dc/optc/dcn10/dcn10_optc.c | 15 +++------------
.../drm/amd/display/dc/optc/dcn20/dcn20_optc.c | 10 ++++++++++
2 files changed, 13 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/optc/dcn10/dcn10_optc.c b/drivers/gpu/drm/amd/display/dc/optc/dcn10/dcn10_optc.c
index 4f82146d94b1..f00d27b7c6fe 100644
--- a/drivers/gpu/drm/amd/display/dc/optc/dcn10/dcn10_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/optc/dcn10/dcn10_optc.c
@@ -950,19 +950,10 @@ void optc1_set_drr(
OTG_FORCE_LOCK_ON_EVENT, 0,
OTG_SET_V_TOTAL_MIN_MASK_EN, 0,
OTG_SET_V_TOTAL_MIN_MASK, 0);
-
- // Setup manual flow control for EOF via TRIG_A
- optc->funcs->setup_manual_trigger(optc);
-
- } else {
- REG_UPDATE_4(OTG_V_TOTAL_CONTROL,
- OTG_SET_V_TOTAL_MIN_MASK, 0,
- OTG_V_TOTAL_MIN_SEL, 0,
- OTG_V_TOTAL_MAX_SEL, 0,
- OTG_FORCE_LOCK_ON_EVENT, 0);
-
- optc->funcs->set_vtotal_min_max(optc, 0, 0);
}
+
+ // Setup manual flow control for EOF via TRIG_A
+ optc->funcs->setup_manual_trigger(optc);
}
void optc1_set_vtotal_min_max(struct timing_generator *optc, int vtotal_min, int vtotal_max)
diff --git a/drivers/gpu/drm/amd/display/dc/optc/dcn20/dcn20_optc.c b/drivers/gpu/drm/amd/display/dc/optc/dcn20/dcn20_optc.c
index 43417cff2c9b..b4694985a40a 100644
--- a/drivers/gpu/drm/amd/display/dc/optc/dcn20/dcn20_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/optc/dcn20/dcn20_optc.c
@@ -453,6 +453,16 @@ void optc2_setup_manual_trigger(struct timing_generator *optc)
{
struct optc *optc1 = DCN10TG_FROM_TG(optc);
+ /* Set the min/max selectors unconditionally so that
+ * DMCUB fw may change OTG timings when necessary
+ * TODO: Remove the w/a after fixing the issue in DMCUB firmware
+ */
+ REG_UPDATE_4(OTG_V_TOTAL_CONTROL,
+ OTG_V_TOTAL_MIN_SEL, 1,
+ OTG_V_TOTAL_MAX_SEL, 1,
+ OTG_FORCE_LOCK_ON_EVENT, 0,
+ OTG_SET_V_TOTAL_MIN_MASK, (1 << 1)); /* TRIGA */
+
REG_SET_8(OTG_TRIGA_CNTL, 0,
OTG_TRIGA_SOURCE_SELECT, 21,
OTG_TRIGA_SOURCE_PIPE_SELECT, optc->inst,
(+Jay)
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@xxxxxxx>
