[PATCH 14/26] drm/amd/display: Add refresh rate range check

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Tom Chung <chiahsuan.chung@xxxxxxx>

[Why]
We only enable the VRR while monitor usable refresh rate range
is greater than 10 Hz.
But we did not check the range in DRM_EDID_FEATURE_CONTINUOUS_FREQ
case.

[How]
Add a refresh rate range check before set the freesync_capable flag
in DRM_EDID_FEATURE_CONTINUOUS_FREQ case.

Reviewed-by: Mario Limonciello <mario.limonciello@xxxxxxx>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@xxxxxxx>
Signed-off-by: Jerry Zuo <jerry.zuo@xxxxxxx>
Signed-off-by: Tom Chung <chiahsuan.chung@xxxxxxx>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 995dfd690da2..b19461aca640 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -12000,9 +12000,11 @@ void amdgpu_dm_update_freesync_caps(struct drm_connector *connector,
 		if (is_dp_capable_without_timing_msa(adev->dm.dc,
 						     amdgpu_dm_connector)) {
 			if (edid->features & DRM_EDID_FEATURE_CONTINUOUS_FREQ) {
-				freesync_capable = true;
 				amdgpu_dm_connector->min_vfreq = connector->display_info.monitor_range.min_vfreq;
 				amdgpu_dm_connector->max_vfreq = connector->display_info.monitor_range.max_vfreq;
+				if (amdgpu_dm_connector->max_vfreq -
+				    amdgpu_dm_connector->min_vfreq > 10)
+					freesync_capable = true;
 			} else {
 				edid_check_required = edid->version > 1 ||
 						      (edid->version == 1 &&
-- 
2.34.1




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux