On 6/26/2024 8:31 AM, Jane Jian wrote:
> [WHY]
> sriov has the higher bit violation when flushing tlb
>
> [HOW]
> normalize the registers to keep lower 16-bit(dword aligned) to aviod higher bit violation
> RLCG will mask xcd out and always assume it's accessing its own xcd
>
> Signed-off-by: Jane Jian <Jane.Jian@xxxxxxx>
> ---
> drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c | 29 +++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c
> index 8d8763ebe027..87a6a610e467 100644
> --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c
> +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c
> @@ -55,6 +55,14 @@ MODULE_FIRMWARE("amdgpu/gc_9_4_4_rlc.bin");
> #define mmSMNAID_XCD1_MCA_SMU 0x38430400 /* SMN AID XCD1 */
> #define mmSMNXCD_XCD0_MCA_SMU 0x40430400 /* SMN XCD XCD0 */
>
> +#define XCC_REG_RANGE_0_LOW 0x2000 /* XCC gfxdec0 lower Bound */
> +#define XCC_REG_RANGE_0_HIGH 0x3400 /* XCC gfxdec0 upper Bound */
> +#define XCC_REG_RANGE_1_LOW 0xA000 /* XCC gfxdec1 lower Bound */
> +#define XCC_REG_RANGE_1_HIGH 0x10000 /* XCC gfxdec1 upper Bound */
> +
> +#define NORMALIZE_XCC_REG_OFFSET(offset) \
> + (offset & 0xFFFF)
> +
> struct amdgpu_gfx_ras gfx_v9_4_3_ras;
>
> static void gfx_v9_4_3_set_ring_funcs(struct amdgpu_device *adev);
> @@ -217,9 +225,24 @@ static void gfx_v9_4_3_init_golden_registers(struct amdgpu_device *adev)
> }
> }
>
> +static uint32_t gfx_v9_4_3_normalize_xcc_reg_offset(uint32_t reg)
> +{
> + uint32_t normalized_reg = NORMALIZE_XCC_REG_OFFSET(reg);
> +
> + /* If it is an XCC reg, normalize the reg to keep
> + lower 16 bits in local xcc */
> +
> + if (((normalized_reg >= XCC_REG_RANGE_0_LOW) && (normalized_reg < XCC_REG_RANGE_0_HIGH)) ||
> + ((normalized_reg >= XCC_REG_RANGE_1_LOW) && (normalized_reg < XCC_REG_RANGE_1_HIGH)))
> + return normalized_reg;
> + else
> + return reg;
> +}
> +
> static void gfx_v9_4_3_write_data_to_reg(struct amdgpu_ring *ring, int eng_sel,
> bool wc, uint32_t reg, uint32_t val)
> {
> + reg = gfx_v9_4_3_normalize_xcc_reg_offset(reg);
> amdgpu_ring_write(ring, PACKET3(PACKET3_WRITE_DATA, 3));
> amdgpu_ring_write(ring, WRITE_DATA_ENGINE_SEL(eng_sel) |
> WRITE_DATA_DST_SEL(0) |
> @@ -234,6 +257,8 @@ static void gfx_v9_4_3_wait_reg_mem(struct amdgpu_ring *ring, int eng_sel,
> uint32_t addr1, uint32_t ref, uint32_t mask,
> uint32_t inv)
> {
> + addr0 = gfx_v9_4_3_normalize_xcc_reg_offset(addr0);
> + addr1 = gfx_v9_4_3_normalize_xcc_reg_offset(addr1);
I guess, this should be done only if it's regspace. Apart from that,
this looks good.
Thanks,
Lijo
> amdgpu_ring_write(ring, PACKET3(PACKET3_WAIT_REG_MEM, 5));
> amdgpu_ring_write(ring,
> /* memory (1) or register (0) */
> @@ -2725,6 +2750,8 @@ static void gfx_v9_4_3_ring_emit_rreg(struct amdgpu_ring *ring, uint32_t reg,
> {
> struct amdgpu_device *adev = ring->adev;
>
> + reg = gfx_v9_4_3_normalize_xcc_reg_offset(reg);
> +
> amdgpu_ring_write(ring, PACKET3(PACKET3_COPY_DATA, 4));
> amdgpu_ring_write(ring, 0 | /* src: register*/
> (5 << 8) | /* dst: memory */
> @@ -2742,6 +2769,8 @@ static void gfx_v9_4_3_ring_emit_wreg(struct amdgpu_ring *ring, uint32_t reg,
> {
> uint32_t cmd = 0;
>
> + reg = gfx_v9_4_3_normalize_xcc_reg_offset(reg);
> +
> switch (ring->funcs->type) {
> case AMDGPU_RING_TYPE_GFX:
> cmd = WRITE_DATA_ENGINE_SEL(1) | WR_CONFIRM;
