From: Aurabindo Pillai <aurabindo.pillai@xxxxxxx>
[WHAT & HOW]
On DCN401, the cursor composition to the plane happens after scaler.
So the cursor isn't stretched with the rest of the surface. Temporarily
disable hardware cursor in case when hardware rotation is enabled
such that userspace falls back to software cursor.
Reviewed-by: Sun peng Li <sunpeng.li@xxxxxxx>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@xxxxxxx>
Cc: Mario Limonciello <mario.limonciello@xxxxxxx>
Cc: Alex Deucher <alexander.deucher@xxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Acked-by: Alex Hung <alex.hung@xxxxxxx>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@xxxxxxx>
---
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 34 ++++++++++++++++---
1 file changed, 29 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 590e899ae3d0..89e371f870b8 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -11093,8 +11093,12 @@ static int dm_crtc_get_cursor_mode(struct amdgpu_device *adev,
int cursor_scale_w, cursor_scale_h;
int i;
- /* Overlay cursor not supported on HW before DCN */
- if (amdgpu_ip_version(adev, DCE_HWIP, 0) == 0) {
+ /* Overlay cursor not supported on HW before DCN
+ * DCN401 does not have the cursor-on-scaled-plane or cursor-on-yuv-plane restrictions
+ * as previous DCN generations, so enable native mode on DCN401 in addition to DCE
+ */
+ if (amdgpu_ip_version(adev, DCE_HWIP, 0) == 0 ||
+ amdgpu_ip_version(adev, DCE_HWIP, 0) == IP_VERSION(4, 0, 1)) {
*cursor_mode = DM_CURSOR_NATIVE_MODE;
return 0;
}
@@ -11237,7 +11241,7 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev,
struct drm_crtc *crtc;
struct drm_crtc_state *old_crtc_state, *new_crtc_state;
struct drm_plane *plane;
- struct drm_plane_state *old_plane_state, *new_plane_state;
+ struct drm_plane_state *old_plane_state, *new_plane_state, *new_cursor_state;
enum dc_status status;
int ret, i;
bool lock_and_validation_needed = false;
@@ -11465,19 +11469,39 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev,
drm_dbg_atomic(dev, "MPO enablement requested on crtc:[%p]\n", crtc);
}
- /* Check cursor planes restrictions */
+ /* Check cursor restrictions */
for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) {
enum amdgpu_dm_cursor_mode required_cursor_mode;
+ int is_rotated, is_scaled;
/* Overlay cusor not subject to native cursor restrictions */
dm_new_crtc_state = to_dm_crtc_state(new_crtc_state);
if (dm_new_crtc_state->cursor_mode == DM_CURSOR_OVERLAY_MODE)
continue;
+ /* Check if rotation or scaling is enabled on DCN401 */
+ if ((drm_plane_mask(crtc->cursor) & new_crtc_state->plane_mask) &&
+ amdgpu_ip_version(adev, DCE_HWIP, 0) == IP_VERSION(4, 0, 1)) {
+ new_cursor_state = drm_atomic_get_new_plane_state(state, crtc->cursor);
+
+ is_rotated = new_cursor_state &&
+ ((new_cursor_state->rotation & DRM_MODE_ROTATE_MASK) != DRM_MODE_ROTATE_0);
+ is_scaled = new_cursor_state && ((new_cursor_state->src_w >> 16 != new_cursor_state->crtc_w) ||
+ (new_cursor_state->src_h >> 16 != new_cursor_state->crtc_h));
+
+ if (is_rotated || is_scaled) {
+ drm_dbg_driver(
+ crtc->dev,
+ "[CRTC:%d:%s] cannot enable hardware cursor due to rotation/scaling\n",
+ crtc->base.id, crtc->name);
+ ret = -EINVAL;
+ goto fail;
+ }
+ }
+
/* If HW can only do native cursor, check restrictions again */
ret = dm_crtc_get_cursor_mode(adev, state, dm_new_crtc_state,
&required_cursor_mode);
-
if (ret) {
drm_dbg_driver(crtc->dev,
"[CRTC:%d:%s] Checking cursor mode failed\n",
--
2.34.1
