From: Alvin Lee <alvin.lee2@xxxxxxx> [Description] In newer DCN's the programming of SYMCLK_FE_SRC_SEL depends on the value of DIG_FE_SOURCE_SELECT. If DIG_FE_SOURCE_SELECT is not already programmed at the time of PHY / DIG enable then the FW sequence will program an incorrect SYMCLK source. Ensure that we program DIG_FE_SOURCE_SELECT for all DIO scenarios (DVI in this particular case) before going through the PHY / DIG enable sequence. Reviewed-by: Wenjing Liu <wenjing.liu@xxxxxxx> Acked-by: Zaeem Mohamed <zaeem.mohamed@xxxxxxx> Signed-off-by: Alvin Lee <alvin.lee2@xxxxxxx> --- drivers/gpu/drm/amd/display/dc/link/link_dpms.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/link/link_dpms.c b/drivers/gpu/drm/amd/display/dc/link/link_dpms.c index a9ddbe12142f..65607589495f 100644 --- a/drivers/gpu/drm/amd/display/dc/link/link_dpms.c +++ b/drivers/gpu/drm/amd/display/dc/link/link_dpms.c @@ -1976,7 +1976,7 @@ static void enable_link_hdmi(struct pipe_ctx *pipe_ctx) /* We need to enable stream encoder for TMDS first to apply 1/4 TMDS * character clock in case that beyond 340MHz. */ - if (dc_is_hdmi_tmds_signal(pipe_ctx->stream->signal)) + if (dc_is_hdmi_tmds_signal(pipe_ctx->stream->signal) || dc_is_dvi_signal(pipe_ctx->stream->signal)) link_hwss->setup_stream_encoder(pipe_ctx); dc->hwss.enable_tmds_link_output( -- 2.34.1
