From: Nicholas Kazlauskas <nicholas.kazlauskas@xxxxxxx> [Why] 3DLUT is not part of the DPP on DCN32/DCN35 ASIC and these registers now exist in MCM state. [How] Add guards when reading DPP state based on whether the register has a valid offset. Reviewed-by: Sung joon Kim <sungjoon.kim@xxxxxxx> Acked-by: Zaeem Mohamed <zaeem.mohamed@xxxxxxx> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@xxxxxxx> --- .../drm/amd/display/dc/dpp/dcn30/dcn30_dpp.c | 29 ++++++++++--------- 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dpp/dcn30/dcn30_dpp.c b/drivers/gpu/drm/amd/display/dc/dpp/dcn30/dcn30_dpp.c index f8c0cee34080..7c05fa20078c 100644 --- a/drivers/gpu/drm/amd/display/dc/dpp/dcn30/dcn30_dpp.c +++ b/drivers/gpu/drm/amd/display/dc/dpp/dcn30/dcn30_dpp.c @@ -64,22 +64,23 @@ void dpp30_read_state(struct dpp *dpp_base, struct dcn_dpp_state *s) } // Shaper LUT (RAM), 3D LUT (mode, bit-depth, size) - REG_GET(CM_SHAPER_CONTROL, - CM_SHAPER_LUT_MODE, &s->shaper_lut_mode); - REG_GET(CM_3DLUT_MODE, - CM_3DLUT_MODE_CURRENT, &s->lut3d_mode); - REG_GET(CM_3DLUT_READ_WRITE_CONTROL, - CM_3DLUT_30BIT_EN, &s->lut3d_bit_depth); - REG_GET(CM_3DLUT_MODE, - CM_3DLUT_SIZE, &s->lut3d_size); + if (REG(CM_SHAPER_CONTROL)) + REG_GET(CM_SHAPER_CONTROL, CM_SHAPER_LUT_MODE, &s->shaper_lut_mode); + if (REG(CM_3DLUT_MODE)) + REG_GET(CM_3DLUT_MODE, CM_3DLUT_MODE_CURRENT, &s->lut3d_mode); + if (REG(CM_3DLUT_READ_WRITE_CONTROL)) + REG_GET(CM_3DLUT_READ_WRITE_CONTROL, CM_3DLUT_30BIT_EN, &s->lut3d_bit_depth); + if (REG(CM_3DLUT_MODE)) + REG_GET(CM_3DLUT_MODE, CM_3DLUT_SIZE, &s->lut3d_size); // Blend/Out Gamma (RAM) - REG_GET(CM_BLNDGAM_CONTROL, - CM_BLNDGAM_MODE_CURRENT, &s->rgam_lut_mode); - if (s->rgam_lut_mode){ - REG_GET(CM_BLNDGAM_CONTROL, CM_BLNDGAM_SELECT_CURRENT, &rgam_lut_mode); - if (!rgam_lut_mode) - s->rgam_lut_mode = LUT_RAM_A; // Otherwise, LUT_RAM_B + if (REG(CM_BLNDGAM_CONTROL)) { + REG_GET(CM_BLNDGAM_CONTROL, CM_BLNDGAM_MODE_CURRENT, &s->rgam_lut_mode); + if (s->rgam_lut_mode){ + REG_GET(CM_BLNDGAM_CONTROL, CM_BLNDGAM_SELECT_CURRENT, &rgam_lut_mode); + if (!rgam_lut_mode) + s->rgam_lut_mode = LUT_RAM_A; // Otherwise, LUT_RAM_B + } } } -- 2.34.1