Re: Kernel 5.15.150 black screen with AMD Raven/Picasso GPU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 20.05.24 um 18:22 schrieb Alex Deucher:

On Sat, May 18, 2024 at 8:17 PM Armin Wolf <W_Armin@xxxxxx> wrote:
Am 17.05.24 um 03:30 schrieb Barry Kauler:

Armin, Yifan, Prike,
I will top-post, so you don't have to scroll down.
After identifying the commit that causes black screen with my gpu, I
posted the result to you guys, on May 9.
It is now May 17 and no reply.
OK, I have now created a patch that reverts Yifan's commit, compiled
5.15.158, and my gpu now works.
Note, the radeon module is not loaded, so it is not a factor.
I'm not a kernel developer. I have identified the culprit and it is up
to you guys to fix it, Yifan especially, as you are the person who has
created the regression.
I will attach my patch.
Regards,
Barry Kauler
Hi,

sorry for not responding to your findings. I normally do not work with GPU drivers,
so i hoped one of the amdgpu developers would handle this.

I CCeddri-devel@xxxxxxxxxxxxxxxxxxxxx  and amd-gfx@xxxxxxxxxxxxxxxxxxxxx so that other
amdgpu developers hear from this issue.

Thanks you for you persistence in finding the offending commit.
Likely this patch should not have been ported to 5.15 in the first
place.  The IOMMU requirements have been dropped from the driver for
the last few kernel versions so it is no longer relevant on newer
kernels.

Alex

Barry, can you verify that the latest upstream kernel works on you device?
If yes, then the commit itself is ok and just the backporting itself was wrong.

Thanks,
Armin Wolf

Armin Wolf

On Thu, May 9, 2024 at 4:08 PM Barry Kauler <bkauler@xxxxxxxxx> wrote:
On Fri, May 3, 2024 at 9:03 PM Armin Wolf <W_Armin@xxxxxx> wrote:
...
# lspci | grep VGA
05:00.0 VGA compatible controller: Advanced Micro Devices, Inc.
[AMD/ATI] Picasso/Raven 2 [Radeon Vega Series / Radeon Vega Mobile
Series] (rev c2)
05:00.7 Non-VGA unclassified device: Advanced Micro Devices, Inc.
[AMD] Raven/Raven2/Renoir Non-Sensor Fusion Hub KMDF driver

# lspci -n -k
...
05:00.0 0300: 1002:15d8 (rev c2)
Subsystem: 1025:1456
Kernel driver in use: amdgpu
Kernel modules: amdgpu
...
thanks for informing us of this regression. Since there are four commits affecting
amdgpu in 5.15.150, i suggest that you use "git bisect" to find the faulty commits,
see https://docs.kernel.org/admin-guide/bug-bisect.html for details.

I think you can speed up the bisecting process by limiting yourself to the AMD DRM
driver directory with "git bisect start -- drivers/gpu/drm/amd", take a look at the
man page of "git bisect" for details.

Thanks,
Armin Wolf
Armin,
Thanks for the advice. I am unfamiliar with git on the commandline.
Previously only used SmartGit gui.
EasyOS requires aufs patch, and for a few days tried to figure out how
to use that with git bisect, then gave up. Changed to testing with my
"QV" distro, which is more conventional, doesn't need any kernel
patches. Managed to get it down to one commit. Here are the steps I
followed:

# git clone git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git
# cd linux-stable
# git tag -l | grep '5\.15\.150'
v5.15.150
# git checkout -b my5.15.150 v5.15.150
Updating files: 100% (65776/65776), done.
Switched to a new branch 'my5.15.150'

Copied in my .config then...

# make menuconfig
# git bisect start -- drivers/gpu/drm/amd
# git bisect bad
# git bisect good v5.15.149
Bisecting: 1 revision left to test after this (roughly 1 step)
[b9a61ee2bb2704e42516e3da962f99dfa98f3b20] drm/amdgpu: reset gpu for
s3 suspend abort case
# make
# rm -rf /boot2
# mkdir -p /boot2/lib/modules
# make INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=/boot2 modules_install
# cp arch/x86/boot/bzImage /boot2/vmlinuz
# sync
...QV on Acer laptop, with amdgpu, works!
# git bisect good
Bisecting: 0 revisions left to test after this (roughly 0 steps)
[56b522f4668167096a50c39446d6263c96219f5f] drm/amdgpu: init iommu
after amdkfd device init
# make
# mkdir -p /boot2/lib/modules
# make INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=/boot2 modules_install
# cp arch/x86/boot/bzImage /boot2/vmlinuz
# sync
...QV on Acer laptop, black screen!

# git bisect bad
56b522f4668167096a50c39446d6263c96219f5f is the first bad commit
commit 56b522f4668167096a50c39446d6263c96219f5f
Author: Yifan Zhang <yifan1.zhang@xxxxxxx>
Date:   Tue Sep 28 15:42:35 2021 +0800

      drm/amdgpu: init iommu after amdkfd device init

      [ Upstream commit 286826d7d976e7646b09149d9bc2899d74ff962b ]

      This patch is to fix clinfo failure in Raven/Picasso:

      Number of platforms: 1
        Platform Profile: FULL_PROFILE
        Platform Version: OpenCL 2.2 AMD-APP (3364.0)
        Platform Name: AMD Accelerated Parallel Processing
        Platform Vendor: Advanced Micro Devices, Inc.
        Platform Extensions: cl_khr_icd cl_amd_event_callback

        Platform Name: AMD Accelerated Parallel Processing Number of devices: 0

      Signed-off-by: Yifan Zhang <yifan1.zhang@xxxxxxx>
      Reviewed-by: James Zhu <James.Zhu@xxxxxxx>
      Tested-by: James Zhu <James.Zhu@xxxxxxx>
      Acked-by: Felix Kuehling <Felix.Kuehling@xxxxxxx>
      Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
      Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

   drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 8 ++++----
   1 file changed, 4 insertions(+), 4 deletions(-)

Anything else I should do, to identify what in this commit is the
likely culprit?
Regards,
Barry Kauler




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux