Re: [PATCH 2/2] drm/amd/pm: check specific index for aldebaran

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 5/14/2024 12:37 PM, Wang, Yang(Kevin) wrote:
> [AMD Official Use Only - AMD Internal Distribution Only]
> 
> -----Original Message-----
> From: amd-gfx <amd-gfx-bounces@xxxxxxxxxxxxxxxxxxxxx> On Behalf Of Lazar, Lijo
> Sent: Tuesday, May 14, 2024 2:07 PM
> To: Zhang, Jesse(Jie) <Jesse.Zhang@xxxxxxx>; amd-gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: Deucher, Alexander <Alexander.Deucher@xxxxxxx>; Koenig, Christian <Christian.Koenig@xxxxxxx>; Huang, Tim <Tim.Huang@xxxxxxx>
> Subject: Re: [PATCH 2/2] drm/amd/pm: check specific index for aldebaran
> 
> 
> 
> On 5/14/2024 11:34 AM, Jesse Zhang wrote:
>> To avoid warning problems, drop index and use PPSMC_MSG_GfxDriverReset
>> instead of index for aldebaran.
>>
>> Signed-off-by: Jesse Zhang <jesse.zhang@xxxxxxx>
>> Suggested-by: Lijo Lazar <lijo.lazar@xxxxxxx>
>> ---
>>  drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c | 13 +++++++------
>>  1 file changed, 7 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
>> b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
>> index a22eb6bbb05e..d671314c46c8 100644
>> --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
>> +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
>> @@ -1880,17 +1880,18 @@ static int aldebaran_mode1_reset(struct
>> smu_context *smu)
>>
>>  static int aldebaran_mode2_reset(struct smu_context *smu)  {
>> -     int ret = 0, index;
>> +     int ret = 0;
>>       struct amdgpu_device *adev = smu->adev;
>>       int timeout = 10;
>>
>> -     index = smu_cmn_to_asic_specific_index(smu, CMN2ASIC_MAPPING_MSG,
>> -                                             SMU_MSG_GfxDeviceDriverReset);
>> -     if (index < 0 )
>> -             return -EINVAL;
>>       mutex_lock(&smu->message_lock);
>>       if (smu->smc_fw_version >= 0x00441400) {
>> -             ret = smu_cmn_send_msg_without_waiting(smu, (uint16_t)index, SMU_RESET_MODE_2);
>> +             ret = smu_cmn_send_smc_msg_with_param(smu,
>> +SMU_MSG_GfxDeviceDriverReset,
> 
> PPSMC_MSG_GfxDriverReset is different from SMU_MSG_GfxDeviceDriverReset.
> Use PPSMC_MSG_GfxDriverReset here (for both patches).
> 
> Thanks,
> Lijo
> 
> [Kevin]:
> 
> There is no interface here to directly use PPSMC_MSG_XXX to send messages to smu/pmfw in the swSMU driver,
> and it is not recommended to do so to maintain code consistency.
> 

Thanks, didn't notice earlier that smu_cmn_send_msg_without_waiting got
changed as well with this patch. This API is a direct interface.

Please note not to change anything else other than what is specifically
requested in review comment. The original comment was only to replace
index with PPSMC_MSG_GfxDriverReset. Please stick to that, otherwise it
will break the entire sequence.

Thanks,
Lijo

> Best Regards,
> Kevin
> 
>> +                                                             SMU_RESET_MODE_2, NULL);
>> +             if (ret) {
>> +                     dev_err(smu->adev->dev, "Failed to mode2 reset!\n");
>> +                     goto out;
>> +             }
>>               /* This is similar to FLR, wait till max FLR timeout */
>>               msleep(100);
>>               dev_dbg(smu->adev->dev, "restore config space...\n");



[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux