[PATCH v1 09/12] media: cx23885: Make I2C terminology more inclusive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I2C v7, SMBus 3.2, and I3C 1.1.1 specifications have replaced "master/slave"
with more appropriate terms. Inspired by and following on to Wolfram's
series to fix drivers/i2c/[1], fix the terminology for users of
I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists
in the specification.

Compile tested, no functionality changes intended

[1]: https://lore.kernel.org/all/20240322132619.6389-1-wsa+renesas@xxxxxxxxxxxxxxxxxxxx/

Signed-off-by: Easwar Hariharan <eahariha@xxxxxxxxxxxxxxxxxxx>
---
 drivers/media/pci/cx23885/cx23885-f300.c | 8 ++++----
 drivers/media/pci/cx23885/cx23885-i2c.c  | 6 +++---
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/media/pci/cx23885/cx23885-f300.c b/drivers/media/pci/cx23885/cx23885-f300.c
index ac1c434e8e24..5f937c281793 100644
--- a/drivers/media/pci/cx23885/cx23885-f300.c
+++ b/drivers/media/pci/cx23885/cx23885-f300.c
@@ -92,7 +92,7 @@ static u8 f300_xfer(struct dvb_frontend *fe, u8 *buf)
 	f300_set_line(dev, F300_RESET, 0);/* begin to send data */
 	msleep(1);
 
-	f300_send_byte(dev, 0xe0);/* the slave address is 0xe0, write */
+	f300_send_byte(dev, 0xe0);/* the client address is 0xe0, write */
 	msleep(1);
 
 	temp = buf[0];
@@ -112,10 +112,10 @@ static u8 f300_xfer(struct dvb_frontend *fe, u8 *buf)
 	}
 
 	if (i > 7) {
-		pr_err("%s: timeout, the slave no response\n",
+		pr_err("%s: timeout, the client no response\n",
 								__func__);
-		ret = 1; /* timeout, the slave no response */
-	} else { /* the slave not busy, prepare for getting data */
+		ret = 1; /* timeout, the client no response */
+	} else { /* the client not busy, prepare for getting data */
 		f300_set_line(dev, F300_RESET, 0);/*ready...*/
 		msleep(1);
 		f300_send_byte(dev, 0xe1);/* 0xe1 is Read */
diff --git a/drivers/media/pci/cx23885/cx23885-i2c.c b/drivers/media/pci/cx23885/cx23885-i2c.c
index f51fad33dc04..385af2a893b4 100644
--- a/drivers/media/pci/cx23885/cx23885-i2c.c
+++ b/drivers/media/pci/cx23885/cx23885-i2c.c
@@ -34,7 +34,7 @@ MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
 #define I2C_EXTEND  (1 << 3)
 #define I2C_NOSTOP  (1 << 4)
 
-static inline int i2c_slave_did_ack(struct i2c_adapter *i2c_adap)
+static inline int i2c_client_did_ack(struct i2c_adapter *i2c_adap)
 {
 	struct cx23885_i2c *bus = i2c_adap->algo_data;
 	struct cx23885_dev *dev = bus->dev;
@@ -84,7 +84,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
 		cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2));
 		if (!i2c_wait_done(i2c_adap))
 			return -EIO;
-		if (!i2c_slave_did_ack(i2c_adap))
+		if (!i2c_client_did_ack(i2c_adap))
 			return -ENXIO;
 
 		dprintk(1, "%s() returns 0\n", __func__);
@@ -163,7 +163,7 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap,
 		cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2) | 1);
 		if (!i2c_wait_done(i2c_adap))
 			return -EIO;
-		if (!i2c_slave_did_ack(i2c_adap))
+		if (!i2c_client_did_ack(i2c_adap))
 			return -ENXIO;
 
 
-- 
2.34.1




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux