Some version of BIOS does not enable all clock levels,
resulting in high level clock frequency of 0.
The number of valid CLKs must be confirmed in advance.
Signed-off-by: Peyton Lee <peytolee@xxxxxxx>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c
index c23d97d34b7e..49881073ff58 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c
@@ -128,6 +128,7 @@ int amdgpu_vpe_configure_dpm(struct amdgpu_vpe *vpe)
struct dpm_clock *VPEClks;
struct dpm_clock *SOCClks;
uint32_t idx;
+ uint32_t vpeclk_enalbled_num = 0;
uint32_t pratio_vmax_vnorm = 0, pratio_vnorm_vmid = 0, pratio_vmid_vmin = 0;
uint16_t pratio_vmin_freq = 0, pratio_vmid_freq = 0, pratio_vnorm_freq = 0, pratio_vmax_freq = 0;
@@ -144,6 +145,14 @@ int amdgpu_vpe_configure_dpm(struct amdgpu_vpe *vpe)
SOCClks = clock_table.SocClocks;
VPEClks = clock_table.VPEClocks;
+ /* Comfirm enabled vpe clk num
+ * Enabled VPE clocks are ordered from low to high in VPEClks
+ * The highest valid clock index+1 is the number of VPEClks
+ */
+ for (idx = PP_SMU_NUM_VPECLK_DPM_LEVELS; idx && !vpeclk_enalbled_num; idx--)
+ if (VPEClks[idx-1].Freq)
+ vpeclk_enalbled_num = idx;
+
/* vpe dpm only cares 4 levels. */
for (idx = 0; idx < VPE_MAX_DPM_LEVEL; idx++) {
uint32_t soc_dpm_level;
@@ -155,8 +164,8 @@ int amdgpu_vpe_configure_dpm(struct amdgpu_vpe *vpe)
soc_dpm_level = (idx * 2) + 1;
/* clamp the max level */
- if (soc_dpm_level > PP_SMU_NUM_VPECLK_DPM_LEVELS - 1)
- soc_dpm_level = PP_SMU_NUM_VPECLK_DPM_LEVELS - 1;
+ if (soc_dpm_level > vpeclk_enalbled_num - 1)
+ soc_dpm_level = vpeclk_enalbled_num - 1;
min_freq = (SOCClks[soc_dpm_level].Freq < VPEClks[soc_dpm_level].Freq) ?
SOCClks[soc_dpm_level].Freq : VPEClks[soc_dpm_level].Freq;
--
2.34.1
