Re: [PATCH 1/2] Revert "drm/amd: Remove freesync video mode amdgpu parameter"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 28.02.24 um 15:23 schrieb Alex Deucher:
On Wed, Feb 28, 2024 at 2:03 AM Christian König
<ckoenig.leichtzumerken@xxxxxxxxx> wrote:
Am 27.02.24 um 19:48 schrieb Alex Deucher:
This reverts commit e94e787e37b99645e7c02d20d0a1ba0f8a18a82a.

This conflicts with how compositors want to handle VRR.  Now
that compositors actually handle VRR, we probably don't need
freesync video.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2985
Scratching my head what actually happens here? Doesn't the problem then
just depend on a module parameter?
Yes.  The problem is that when freesync video is enabled, compositors
don't know which modes are actual modes and which are a VRR video
mode.  There are still customers that want the vrr video mode smooth
video playback, but compositors don't want this by default.  I guess
the alternative is to just drop this feature altogether now that
compositors and media players are starting to support this properly.

That's what I would suggest as well.

As far as I can see adding those modes is actually buggy behavior and we need to avoid it.

Christian.


Alex

Regards,
Christian.

Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
---
   drivers/gpu/drm/amd/amdgpu/amdgpu.h     |  1 +
   drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 27 +++++++++++++++++++++++++
   2 files changed, 28 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
index 0e365cadcc3fc..925026c183f41 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -194,6 +194,7 @@ extern int amdgpu_emu_mode;
   extern uint amdgpu_smu_memory_pool_size;
   extern int amdgpu_smu_pptable_id;
   extern uint amdgpu_dc_feature_mask;
+extern uint amdgpu_freesync_vid_mode;
   extern uint amdgpu_dc_debug_mask;
   extern uint amdgpu_dc_visual_confirm;
   extern int amdgpu_dm_abm_level;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 15a8a64fc4e28..82b154b103f43 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -199,6 +199,7 @@ int amdgpu_mes_kiq;
   int amdgpu_noretry = -1;
   int amdgpu_force_asic_type = -1;
   int amdgpu_tmz = -1; /* auto */
+uint amdgpu_freesync_vid_mode;
   int amdgpu_reset_method = -1; /* auto */
   int amdgpu_num_kcq = -1;
   int amdgpu_smartshift_bias;
@@ -883,6 +884,32 @@ module_param_named(damageclips, amdgpu_damage_clips, int, 0444);
   MODULE_PARM_DESC(tmz, "Enable TMZ feature (-1 = auto (default), 0 = off, 1 = on)");
   module_param_named(tmz, amdgpu_tmz, int, 0444);

+/**
+ * DOC: freesync_video (uint)
+ * Enable the optimization to adjust front porch timing to achieve seamless
+ * mode change experience when setting a freesync supported mode for which full
+ * modeset is not needed.
+ *
+ * The Display Core will add a set of modes derived from the base FreeSync
+ * video mode into the corresponding connector's mode list based on commonly
+ * used refresh rates and VRR range of the connected display, when users enable
+ * this feature. From the userspace perspective, they can see a seamless mode
+ * change experience when the change between different refresh rates under the
+ * same resolution. Additionally, userspace applications such as Video playback
+ * can read this modeset list and change the refresh rate based on the video
+ * frame rate. Finally, the userspace can also derive an appropriate mode for a
+ * particular refresh rate based on the FreeSync Mode and add it to the
+ * connector's mode list.
+ *
+ * Note: This is an experimental feature.
+ *
+ * The default value: 0 (off).
+ */
+MODULE_PARM_DESC(
+     freesync_video,
+     "Enable freesync modesetting optimization feature (0 = off (default), 1 = on)");
+module_param_named(freesync_video, amdgpu_freesync_vid_mode, uint, 0444);
+
   /**
    * DOC: reset_method (int)
    * GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco)




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux