答复: 答复: [PATCH 2/2] drm/amdgpu: save/restore uvd fence sequence number in suspend/resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Christian,

Correctly, the problem really is that uvd fence memory is behind uvd firmware. In generic case, uvd firmware and fence will be saved in adev->uvd.saved_bo. In this issue, because of there is no uvd handles, so uvd firmware and fence memory are not saved in amdgpu_uvd_suspend(). In amdgpu_uvd_resume(), code run into 'else' case, it just restore the firmware.

I will try your suggestion tomorrow.

Thanks
JimQu

-----é?®ä»¶å??件-----
å??件人: Koenig, Christian 
å??é??æ?¶é?´: 2017å¹´12æ??14æ?¥ 22:02
�件人: Qu, Jim <Jim.Qu at amd.com>; amd-gfx at lists.freedesktop.org
主�: Re: ��: [PATCH 2/2] drm/amdgpu: save/restore uvd fence sequence number in suspend/resume

Hi Jim,

ah yes, we dropped that because it shouldn't be necessary any more on amdgpu. The fences are written into a GTT BO and the content of that should be preserved even over a suspend & resume cycle.

But there is an issue with that. Taking a look at
amdgpu_fence_driver_start_ring() we still have the hack for ancient UVD versions to put the fence directly behind the UVD firmware instead of into the GTT BO.

Can you try if it works as well if you disabled that? The workaround is most likely not needed any more with modern firmware.

If that doesn't work you could try to call
amdgpu_fence_driver_force_completion() in the UVD resume code that should have the same effect as your proposed patch, but is far less code.

Regards,
Christian.

Am 14.12.2017 um 14:50 schrieb Qu, Jim:
> Hi Christian,
>
> I remember the amdgpu_fence_driver_start_ring() function is called by amdgpu_ring_init (), so the function should never be called in amdgpu_device_resume().
>
> Thanks
> JimQu
> -----é?®ä»¶å??件-----
> å??件人: Christian König [mailto:ckoenig.leichtzumerken at gmail.com]
> å??é??æ?¶é?´: 2017å¹´12æ??14æ?¥ 20:57
> �件人: Qu, Jim <Jim.Qu at amd.com>; amd-gfx at lists.freedesktop.org
> 主�: Re: [PATCH 2/2] drm/amdgpu: save/restore uvd fence sequence number 
> in suspend/resume
>
> Am 14.12.2017 um 12:38 schrieb Jim Qu:
>> otherwise, uvd block will be never powered up in ring begin_use() 
>> callback. uvd ring test will be fail in resume in rumtime pm.
> NAK, that should already be done by amdgpu_fence_driver_start_ring().
>
> If this doesn't work please try to figure out why
> amdgpu_fence_driver_start_ring() isn't called during resume (Or if it is called, but not in the right order or whatever really goes wrong here).
>
> Regards,
> Christian.
>
>> Change-Id: I71b6c00bad174c90e12628e6037dc04a4ff9d9f2
>> Signed-off-by: Jim Qu <Jim.Qu at amd.com>
>> ---
>>    drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c | 10 ++++++++--
>>    drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.h |  1 +
>>    2 files changed, 9 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c
>> b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c
>> index 343b682..a2d0b84 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c
>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c
>> @@ -293,6 +293,7 @@ int amdgpu_uvd_suspend(struct amdgpu_device *adev)
>>    	unsigned size;
>>    	void *ptr;
>>    	int i;
>> +	struct amdgpu_fence_driver *drv = &adev->uvd.ring.fence_drv;
>>    
>>    	cancel_delayed_work_sync(&adev->uvd.idle_work);
>>    
>> @@ -303,9 +304,11 @@ int amdgpu_uvd_suspend(struct amdgpu_device *adev)
>>    		if (atomic_read(&adev->uvd.handles[i]))
>>    			break;
>>    
>> -	if (i == AMDGPU_MAX_UVD_HANDLES)
>> +	if (i == AMDGPU_MAX_UVD_HANDLES) {
>> +		if (drv->cpu_addr)
>> +			adev->uvd.fence_seq = le32_to_cpu(*drv->cpu_addr);
>>    		return 0;
>> -
>> +	}
>>    	size = amdgpu_bo_size(adev->uvd.vcpu_bo);
>>    	ptr = adev->uvd.cpu_addr;
>>    
>> @@ -322,6 +325,7 @@ int amdgpu_uvd_resume(struct amdgpu_device *adev)
>>    {
>>    	unsigned size;
>>    	void *ptr;
>> +	struct amdgpu_fence_driver *drv = &adev->uvd.ring.fence_drv;
>>    
>>    	if (adev->uvd.vcpu_bo == NULL)
>>    		return -EINVAL;
>> @@ -346,6 +350,8 @@ int amdgpu_uvd_resume(struct amdgpu_device *adev)
>>    			ptr += le32_to_cpu(hdr->ucode_size_bytes);
>>    		}
>>    		memset_io(ptr, 0, size);
>> +		if (drv->cpu_addr)
>> +			*drv->cpu_addr = le32_to_cpu(adev->uvd.fence_seq);
>>    	}
>>    
>>    	return 0;
>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.h
>> b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.h
>> index 32ea20b..88f6db9 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.h
>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.h
>> @@ -55,6 +55,7 @@ struct amdgpu_uvd {
>>    	struct drm_sched_entity entity_enc;
>>    	uint32_t                srbm_soft_reset;
>>    	unsigned		num_enc_rings;
>> +	uint32_t		fence_seq;
>>    };
>>    
>>    int amdgpu_uvd_sw_init(struct amdgpu_device *adev);



[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux