On Mon, Dec 11, 2017 at 5:47 PM, Alex Deucher <alexdeucher at gmail.com> wrote:
> On Mon, Dec 11, 2017 at 10:23 AM, Oded Gabbay <oded.gabbay at gmail.com> wrote:
>> On Sat, Dec 9, 2017 at 6:09 AM, Felix Kuehling <Felix.Kuehling at amd.com> wrote:
>>> From: Amber Lin <Amber.Lin at amd.com>
>>>
>>> For hardware blocks whose performance counters are accessed via MMIO
>>> registers, KFD provides the support for those privileged blocks. IOMMU is
>>> one of those privileged blocks. Most performance counter properties
>>> required by Thunk are available at /sys/bus/event_source/devices/amd_iommu.
>>> This patch adds properties to topology in KFD sysfs for information not
>>> available in /sys/bus/event_source/devices/amd_iommu. They are shown at
>>> /sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/iommu/ formatted as
>>> /sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/<block>/<property>, i.e.
>>> /sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/iommu/max_concurrent.
>>> For dGPUs, who don't have IOMMU, nothing appears under
>>> /sys/devices/virtual/kfd/kfd/topology/nodes/0/perf.
>>
>> I don't feel comfortable with this patch. It seems to me you didn't
>> have anywhere to put these counters so you just stuck them in a place
>> the thunk already reads because it was "convenient" for you to do it.
>> But, as you point out in a comment later, these counters have nothing
>> to do with topology.
>> So this just feels wrong and I would like to:
>>
>> a. get additional opinions on it. Christian ? Alex ? What do you think
>> ? How the GPU's GFX counters are exposed ?
>
> They are handled as part of the command stream and exposed via OpenGL
> extensions.
>
>> b. Ask why not use IOCTL to get the counters ?
>
> I'm not sure that is really any better.
I imagined it should be part of some INFO IOCTL, similar to the one in amdgpu.
btw, there is another patch about adding vram usage to sysfs, which I
also don't like, because this type of info is reported in
amdgpu_info_ioctl.
I think there might be a place for amdkfd_info_ioctl.
Thanks,
Oded
>
>>
>> btw, I tried to search for other drivers that do this (expose perf
>> counters in sysfs) and didn't find any (it wasn't an exhaustive search
>> so I may have missed).
>
> There is the perf subsystem, but I'm not sure how well it works for
> device counters and tying the sampling to events and such.
>
> Alex
>
>>
>> Thanks,
>> Oded
>>
>>
>>
>>
>>>
>>> Signed-off-by: Amber Lin <Amber.Lin at amd.com>
>>> Signed-off-by: Kent Russell <kent.russell at amd.com>
>>> Signed-off-by: Felix Kuehling <Felix.Kuehling at amd.com>
>>> ---
>>> drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 116 +++++++++++++++++++++++++++++-
>>> drivers/gpu/drm/amd/amdkfd/kfd_topology.h | 13 ++++
>>> 2 files changed, 127 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
>>> index 7fe7ee0..52d20f5 100644
>>> --- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
>>> +++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
>>> @@ -104,6 +104,7 @@ static void kfd_release_topology_device(struct kfd_topology_device *dev)
>>> struct kfd_mem_properties *mem;
>>> struct kfd_cache_properties *cache;
>>> struct kfd_iolink_properties *iolink;
>>> + struct kfd_perf_properties *perf;
>>>
>>> list_del(&dev->list);
>>>
>>> @@ -128,6 +129,13 @@ static void kfd_release_topology_device(struct kfd_topology_device *dev)
>>> kfree(iolink);
>>> }
>>>
>>> + while (dev->perf_props.next != &dev->perf_props) {
>>> + perf = container_of(dev->perf_props.next,
>>> + struct kfd_perf_properties, list);
>>> + list_del(&perf->list);
>>> + kfree(perf);
>>> + }
>>> +
>>> kfree(dev);
>>> }
>>>
>>> @@ -162,6 +170,7 @@ struct kfd_topology_device *kfd_create_topology_device(
>>> INIT_LIST_HEAD(&dev->mem_props);
>>> INIT_LIST_HEAD(&dev->cache_props);
>>> INIT_LIST_HEAD(&dev->io_link_props);
>>> + INIT_LIST_HEAD(&dev->perf_props);
>>>
>>> list_add_tail(&dev->list, device_list);
>>>
>>> @@ -328,6 +337,39 @@ static struct kobj_type cache_type = {
>>> .sysfs_ops = &cache_ops,
>>> };
>>>
>>> +/****** Sysfs of Performance Counters ******/
>>> +
>>> +struct kfd_perf_attr {
>>> + struct kobj_attribute attr;
>>> + uint32_t data;
>>> +};
>>> +
>>> +static ssize_t perf_show(struct kobject *kobj, struct kobj_attribute *attrs,
>>> + char *buf)
>>> +{
>>> + struct kfd_perf_attr *attr;
>>> +
>>> + buf[0] = 0;
>>> + attr = container_of(attrs, struct kfd_perf_attr, attr);
>>> + if (!attr->data) /* invalid data for PMC */
>>> + return 0;
>>> + else
>>> + return sysfs_show_32bit_val(buf, attr->data);
>>> +}
>>> +
>>> +#define KFD_PERF_DESC(_name, _data) \
>>> +{ \
>>> + .attr = __ATTR(_name, 0444, perf_show, NULL), \
>>> + .data = _data, \
>>> +}
>>> +
>>> +static struct kfd_perf_attr perf_attr_iommu[] = {
>>> + KFD_PERF_DESC(max_concurrent, 0),
>>> + KFD_PERF_DESC(num_counters, 0),
>>> + KFD_PERF_DESC(counter_ids, 0),
>>> +};
>>> +/****************************************/
>>> +
>>> static ssize_t node_show(struct kobject *kobj, struct attribute *attr,
>>> char *buffer)
>>> {
>>> @@ -452,6 +494,7 @@ static void kfd_remove_sysfs_node_entry(struct kfd_topology_device *dev)
>>> struct kfd_iolink_properties *iolink;
>>> struct kfd_cache_properties *cache;
>>> struct kfd_mem_properties *mem;
>>> + struct kfd_perf_properties *perf;
>>>
>>> if (dev->kobj_iolink) {
>>> list_for_each_entry(iolink, &dev->io_link_props, list)
>>> @@ -488,6 +531,16 @@ static void kfd_remove_sysfs_node_entry(struct kfd_topology_device *dev)
>>> dev->kobj_mem = NULL;
>>> }
>>>
>>> + if (dev->kobj_perf) {
>>> + list_for_each_entry(perf, &dev->perf_props, list) {
>>> + kfree(perf->attr_group);
>>> + perf->attr_group = NULL;
>>> + }
>>> + kobject_del(dev->kobj_perf);
>>> + kobject_put(dev->kobj_perf);
>>> + dev->kobj_perf = NULL;
>>> + }
>>> +
>>> if (dev->kobj_node) {
>>> sysfs_remove_file(dev->kobj_node, &dev->attr_gpuid);
>>> sysfs_remove_file(dev->kobj_node, &dev->attr_name);
>>> @@ -504,8 +557,10 @@ static int kfd_build_sysfs_node_entry(struct kfd_topology_device *dev,
>>> struct kfd_iolink_properties *iolink;
>>> struct kfd_cache_properties *cache;
>>> struct kfd_mem_properties *mem;
>>> + struct kfd_perf_properties *perf;
>>> int ret;
>>> - uint32_t i;
>>> + uint32_t i, num_attrs;
>>> + struct attribute **attrs;
>>>
>>> if (WARN_ON(dev->kobj_node))
>>> return -EEXIST;
>>> @@ -534,6 +589,10 @@ static int kfd_build_sysfs_node_entry(struct kfd_topology_device *dev,
>>> if (!dev->kobj_iolink)
>>> return -ENOMEM;
>>>
>>> + dev->kobj_perf = kobject_create_and_add("perf", dev->kobj_node);
>>> + if (!dev->kobj_perf)
>>> + return -ENOMEM;
>>> +
>>> /*
>>> * Creating sysfs files for node properties
>>> */
>>> @@ -611,7 +670,33 @@ static int kfd_build_sysfs_node_entry(struct kfd_topology_device *dev,
>>> if (ret < 0)
>>> return ret;
>>> i++;
>>> -}
>>> + }
>>> +
>>> + /* All hardware blocks have the same number of attributes. */
>>> + num_attrs = sizeof(perf_attr_iommu)/sizeof(struct kfd_perf_attr);
>>> + list_for_each_entry(perf, &dev->perf_props, list) {
>>> + perf->attr_group = kzalloc(sizeof(struct kfd_perf_attr)
>>> + * num_attrs + sizeof(struct attribute_group),
>>> + GFP_KERNEL);
>>> + if (!perf->attr_group)
>>> + return -ENOMEM;
>>> +
>>> + attrs = (struct attribute **)(perf->attr_group + 1);
>>> + if (!strcmp(perf->block_name, "iommu")) {
>>> + /* Information of IOMMU's num_counters and counter_ids is shown
>>> + * under /sys/bus/event_source/devices/amd_iommu. We don't
>>> + * duplicate here.
>>> + */
>>> + perf_attr_iommu[0].data = perf->max_concurrent;
>>> + for (i = 0; i < num_attrs; i++)
>>> + attrs[i] = &perf_attr_iommu[i].attr.attr;
>>> + }
>>> + perf->attr_group->name = perf->block_name;
>>> + perf->attr_group->attrs = attrs;
>>> + ret = sysfs_create_group(dev->kobj_perf, perf->attr_group);
>>> + if (ret < 0)
>>> + return ret;
>>> + }
>>>
>>> return 0;
>>> }
>>> @@ -778,6 +863,29 @@ static void find_system_memory(const struct dmi_header *dm,
>>> }
>>> }
>>> }
>>> +
>>> +/*
>>> + * Performance counters information is not part of CRAT but we would like to
>>> + * put them in the sysfs under topology directory for Thunk to get the data.
>>> + * This function is called before updating the sysfs.
>>> + */
>>> +static int kfd_add_perf_to_topology(struct kfd_topology_device *kdev)
>>> +{
>>> + struct kfd_perf_properties *props;
>>> +
>>> + if (amd_iommu_pc_supported()) {
>>> + props = kfd_alloc_struct(props);
>>> + if (!props)
>>> + return -ENOMEM;
>>> + strcpy(props->block_name, "iommu");
>>> + props->max_concurrent = amd_iommu_pc_get_max_banks(0) *
>>> + amd_iommu_pc_get_max_counters(0); /* assume one iommu */
>>> + list_add_tail(&props->list, &kdev->perf_props);
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> /* kfd_add_non_crat_information - Add information that is not currently
>>> * defined in CRAT but is necessary for KFD topology
>>> * @dev - topology device to which addition info is added
>>> @@ -860,6 +968,10 @@ int kfd_topology_init(void)
>>> }
>>> }
>>>
>>> + kdev = list_first_entry(&temp_topology_device_list,
>>> + struct kfd_topology_device, list);
>>> + kfd_add_perf_to_topology(kdev);
>>> +
>>> down_write(&topology_lock);
>>> kfd_topology_update_device_list(&temp_topology_device_list,
>>> &topology_device_list);
>>> diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.h b/drivers/gpu/drm/amd/amdkfd/kfd_topology.h
>>> index 55de56f..b9f3142 100644
>>> --- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.h
>>> +++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.h
>>> @@ -134,6 +134,13 @@ struct kfd_iolink_properties {
>>> struct attribute attr;
>>> };
>>>
>>> +struct kfd_perf_properties {
>>> + struct list_head list;
>>> + char block_name[16];
>>> + uint32_t max_concurrent;
>>> + struct attribute_group *attr_group;
>>> +};
>>> +
>>> struct kfd_topology_device {
>>> struct list_head list;
>>> uint32_t gpu_id;
>>> @@ -144,11 +151,13 @@ struct kfd_topology_device {
>>> struct list_head cache_props;
>>> uint32_t io_link_count;
>>> struct list_head io_link_props;
>>> + struct list_head perf_props;
>>> struct kfd_dev *gpu;
>>> struct kobject *kobj_node;
>>> struct kobject *kobj_mem;
>>> struct kobject *kobj_cache;
>>> struct kobject *kobj_iolink;
>>> + struct kobject *kobj_perf;
>>> struct attribute attr_gpuid;
>>> struct attribute attr_name;
>>> struct attribute attr_props;
>>> @@ -173,4 +182,8 @@ struct kfd_topology_device *kfd_create_topology_device(
>>> struct list_head *device_list);
>>> void kfd_release_topology_device_list(struct list_head *device_list);
>>>
>>> +extern bool amd_iommu_pc_supported(void);
>>> +extern u8 amd_iommu_pc_get_max_banks(u16 devid);
>>> +extern u8 amd_iommu_pc_get_max_counters(u16 devid);
>>> +
>>> #endif /* __KFD_TOPOLOGY_H__ */
>>> --
>>> 2.7.4
>>>
>> _______________________________________________
>> amd-gfx mailing list
>> amd-gfx at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
