Yes, I'm up-to-date. KFD doesn't use the KIQ to map the HIQ. And HIQ
maps all our other queues (unless we're disabling the hardware scheduler).
Regards,
Felix
On 2017-08-11 07:45 PM, StDenis, Tom wrote:
> Hi Felix,
>
> I'm assuming your tree is up to date with amd-staging-4.11 or 4.12 but we did previously have issues with compute rings if PG was enabled (specifically CGCG + PG) on Carrizo. Then David committed some KIQ upgrades and it started working properly.
>
> Could that be related? Because GFX PG "should work" on Carrizo is the official line last I heard from the GFX IP team.
>
> Cheers,
> Tom
> ________________________________________
> From: amd-gfx <amd-gfx-bounces at lists.freedesktop.org> on behalf of Felix Kuehling <Felix.Kuehling at amd.com>
> Sent: Friday, August 11, 2017 17:56
> To: amd-gfx at lists.freedesktop.org; oded.gabbay at gmail.com
> Cc: Kuehling, Felix
> Subject: [PATCH 18/19] drm/amdgpu: Disable GFX PG on CZ
>
> It's causing problems with user mode queues and the HIQ, and can
> lead to hard hangs during boot after programming RLC_CP_SCHEDULERS.
>
> Signed-off-by: Felix Kuehling <Felix.Kuehling at amd.com>
> ---
> drivers/gpu/drm/amd/amdgpu/vi.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c
> index 18bb3cb..495c8a3 100644
> --- a/drivers/gpu/drm/amd/amdgpu/vi.c
> +++ b/drivers/gpu/drm/amd/amdgpu/vi.c
> @@ -1029,8 +1029,7 @@ static int vi_common_early_init(void *handle)
> /* rev0 hardware requires workarounds to support PG */
> adev->pg_flags = 0;
> if (adev->rev_id != 0x00 || CZ_REV_BRISTOL(adev->pdev->revision)) {
> - adev->pg_flags |= AMD_PG_SUPPORT_GFX_PG |
> - AMD_PG_SUPPORT_GFX_SMG |
> + adev->pg_flags |= AMD_PG_SUPPORT_GFX_SMG |
> AMD_PG_SUPPORT_GFX_PIPELINE |
> AMD_PG_SUPPORT_CP |
> AMD_PG_SUPPORT_UVD |
> --
> 2.7.4
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
