Hi all, I've pushed changes to umr (master) and our linux (amd-staging-4.12 should be on https://cgit.freedesktop.org/~agd5f/linux/log/?h=amd-staging-4.12 soonish) trees that allow in limited circumstances to VM decode through IOMMU which has been tested for both iommu active and inactive. umr previously could not fully resolve addresses when IOMMU is active since the GPU is programmed with dma mapped addresses. As such reading IBs or shaders or VM decoding in general would fail. The change to the kernel adds a tracepoint which logs all dma map/unmap operations (via the TTM) which umr can read and use to access physical memory behind the mappings. To enable this you need to enable two trace points: echo 1 > /sys/kernel/debug/tracing/events/amdgpu/amdgpu_ttm_tt_populate/enable echo 1 > /sys/kernel/debug/tracing/events/amdgpu/amdgpu_ttm_tt_unpopulate/enable You need to enable the traces before running your test case/application. If the trace file can't hold enough for your application you can tail it to ~/trace which umr will read preferentially (make sure you delete this file when done or you will be reading old mappings). cat /sys/kernel/debug/tracing/trace_pipe > ~/trace umr can process the traces fairly quickly (at about 1,500,000+ lines/sec on my Carrizo...) so theoretically heavy workloads should be manageable. The traces contain PCI information which umr uses to match mappings so multiple GPU systems should work fine as well. Though testing would be appreciated. Cheers, Tom
