[PATCH 23/25] drm/amdgpu: workaround tonga HW bug in HQD programming sequence

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tonga based asics may experience hangs when an HQD's EOP parameters
are modified.

Workaround this HW issue by avoiding writes to these registers for
tonga asics.

Based on the following ROCm commit:
2a0fb8 - drm/amdgpu: Synchronize KFD HQD load protocol with CP scheduler

>From the ROCm git repository:
https://github.com/RadeonOpenCompute/ROCK-Kernel-Driver.git

CC: Jay Cornwall <Jay.Cornwall at amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling at amd.com>
Signed-off-by: Andres Rodriguez <andresx7 at gmail.com>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
index 56e1bab..fe5a928 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -5036,21 +5036,35 @@ int gfx_v8_0_mqd_commit(struct amdgpu_device *adev, struct vi_mqd *mqd)
 
 	/* HQD registers extend from mmCP_MQD_BASE_ADDR to mmCP_HQD_ERROR */
 	mqd_data = &mqd->cp_mqd_base_addr_lo;
 
 	/* disable wptr polling */
 	tmp = RREG32(mmCP_PQ_WPTR_POLL_CNTL);
 	tmp = REG_SET_FIELD(tmp, CP_PQ_WPTR_POLL_CNTL, EN, 0);
 	WREG32(mmCP_PQ_WPTR_POLL_CNTL, tmp);
 
 	/* program all HQD registers */
-	for (mqd_reg = mmCP_HQD_VMID; mqd_reg <= mmCP_HQD_ERROR; mqd_reg++)
+	for (mqd_reg = mmCP_HQD_VMID; mqd_reg <= mmCP_HQD_EOP_CONTROL; mqd_reg++)
+		WREG32(mqd_reg, mqd_data[mqd_reg - mmCP_MQD_BASE_ADDR]);
+
+	/* Tonga errata: EOP RPTR/WPTR should be left unmodified.
+	 * This is safe since EOP RPTR==WPTR for any inactive HQD
+	 * on ASICs that do not support context-save.
+	 * EOP writes/reads can start anywhere in the ring.
+	 */
+	if (adev->asic_type != CHIP_TONGA) {
+		WREG32(mmCP_HQD_EOP_RPTR, mqd->cp_hqd_eop_rptr);
+		WREG32(mmCP_HQD_EOP_WPTR, mqd->cp_hqd_eop_wptr);
+		WREG32(mmCP_HQD_EOP_WPTR_MEM, mqd->cp_hqd_eop_wptr_mem);
+	}
+
+	for (mqd_reg = mmCP_HQD_EOP_EVENTS; mqd_reg <= mmCP_HQD_ERROR; mqd_reg++)
 		WREG32(mqd_reg, mqd_data[mqd_reg - mmCP_MQD_BASE_ADDR]);
 
 	/* activate the HQD */
 	for (mqd_reg = mmCP_MQD_BASE_ADDR; mqd_reg <= mmCP_HQD_ACTIVE; mqd_reg++)
 		WREG32(mqd_reg, mqd_data[mqd_reg - mmCP_MQD_BASE_ADDR]);
 
 	return 0;
 }
 
 static int gfx_v8_0_kiq_init_queue(struct amdgpu_ring *ring)
-- 
2.9.3



[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux