From: Michel Dänzer <michel.daenzer@xxxxxxx> We were always passing the hotspot position in the X screen coordinate space, but drmModeSetCursor2 needs it in the CRTC coordinate space. The wrong hotspot position would cause the kernel driver to adjust the HW cursor position incorrectly when the hotspot position changed. (Ported from amdgpu commit d42773eb45baff5933730e26878a0b45fcf07b65) Signed-off-by: Michel Dänzer <michel.daenzer at amd.com> --- src/drmmode_display.c | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) diff --git a/src/drmmode_display.c b/src/drmmode_display.c index 1b1b3e6..3888e5c 100644 --- a/src/drmmode_display.c +++ b/src/drmmode_display.c @@ -1047,12 +1047,42 @@ drmmode_show_cursor (xf86CrtcPtr crtc) if (use_set_cursor2) { xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(crtc->scrn); CursorPtr cursor = xf86_config->cursor; + int xhot = cursor->bits->xhot; + int yhot = cursor->bits->yhot; int ret; + if (crtc->rotation != RR_Rotate_0 && + crtc->rotation != (RR_Rotate_180 | RR_Reflect_X | + RR_Reflect_Y)) { + int t; + + /* Reflect & rotate hotspot position */ + if (crtc->rotation & RR_Reflect_X) + xhot = info->cursor_w - xhot - 1; + if (crtc->rotation & RR_Reflect_Y) + yhot = info->cursor_h - yhot - 1; + + switch (crtc->rotation & 0xf) { + case RR_Rotate_90: + t = xhot; + xhot = yhot; + yhot = info->cursor_w - t - 1; + break; + case RR_Rotate_180: + xhot = info->cursor_w - xhot - 1; + yhot = info->cursor_h - yhot - 1; + break; + case RR_Rotate_270: + t = xhot; + xhot = info->cursor_h - yhot - 1; + yhot = t; + } + } + ret = drmModeSetCursor2(drmmode->fd, drmmode_crtc->mode_crtc->crtc_id, handle, info->cursor_w, info->cursor_h, - cursor->bits->xhot, cursor->bits->yhot); + xhot, yhot); if (ret == -EINVAL) use_set_cursor2 = FALSE; else -- 2.9.3