[PATCH 1/2] drm/amdgpu: fix power state when port pm is unavailable

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

axion fireburn # acpidump > acpidump
Wrong checksum for FADT!

ACPI Dump attached

axion fireburn # lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Skylake Host Bridge/DRAM
Registers [8086:1910] (rev 07)
00:01.0 PCI bridge [0604]: Intel Corporation Skylake PCIe Controller (x16)
[8086:1901] (rev 07)
00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 530
[8086:191b] (rev 06)
00:04.0 Signal processing controller [1180]: Intel Corporation Skylake
Processor Thermal Subsystem [8086:1903] (rev 07)
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-H USB 3.0
xHCI Controller [8086:a12f] (rev 31)
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise
Point-H Thermal subsystem [8086:a131] (rev 31)
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-H
CSME HECI #1 [8086:a13a] (rev 31)
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-H SATA
Controller [AHCI mode] [8086:a103] (rev 31)
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express
Root Port #1 [8086:a110] (rev f1)
00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express
Root Port #5 [8086:a114] (rev f1)
00:1c.5 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express
Root Port #6 [8086:a115] (rev f1)
00:1c.6 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express
Root Port #7 [8086:a116] (rev f1)
00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express
Root Port #9 [8086:a118] (rev f1)
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-H LPC Controller
[8086:a14e] (rev 31)
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-H PMC
[8086:a121] (rev 31)
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-H HD Audio
[8086:a170] (rev 31)
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-H SMBus [8086:a123]
(rev 31)
01:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI]
Amethyst XT [Radeon R9 M295X] [1002:6921]
3b:00.0 Ethernet controller [0200]: Qualcomm Atheros Killer E2400 Gigabit
Ethernet Controller [1969:e0a1] (rev 10)
3c:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac
Wireless Network Adapter [168c:003e] (rev 32)
3d:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227
PCI Express Card Reader [10ec:5227] (rev 01)
3e:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd
NVMe SSD Controller [144d:a802] (rev 01)

I expected an instant lock up when insmodding the modules however that
didn't happen

Please also find the dmesg attached

On Sat, 26 Nov 2016 at 11:39 Peter Wu <peter at lekensteyn.nl> wrote:

Hi Mike,

To grab console output, you could also try to blacklist amdgpu at
startup and load it later.

Can you provide your acpidump (and lspci -nn, especially if you do not
have a dmesg).

This is the call chain:

+ amdgpu_atpx_detect
  + amdgpu_atpx_pci_probe_handle
    + return if ATPX ACPI handle cannot be found
    + set amdgpu_atpx_priv.bridge_pm_usable
  + amdgpu_atpx_init
    + amdgpu_atpx_validate
      + use amdgpu_atpx_priv.bridge_pm_usable

I wonder whether newer devices remove ATPX completely. If that is the
case (please provide acpidump!), can you try this hack:

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c
b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c
index 951addf..5c23382 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c
@@ -487,6 +487,7 @@ static bool amdgpu_atpx_pci_probe_handle(struct pci_dev
*pdev)
        status = acpi_get_handle(dhandle, "ATPX", &atpx_handle);
        if (ACPI_FAILURE(status)) {
                amdgpu_atpx_priv.other_handle = dhandle;
+               amdgpu_atpx_priv.bridge_pm_usable = true;
                return false;
        }
        amdgpu_atpx_priv.dhandle = dhandle;

This is not intended for merging, but just testing a hypothesis.

Kind regards,
Peter

On Sat, Nov 26, 2016 at 11:20:28AM +0000, Mike Lothian wrote:
> He's some screen shots of the booting screens, apologies they're not that
> clear
>
> https://imgur.com/a/V7mRA
>
> On Sat, 26 Nov 2016 at 11:00 Mike Lothian <mike at fireburn.co.uk> wrote:
>
> > Hi
> >
> > The previous working kernel, was the patch before this - reverting
fixes it
> >
> > My bios date is quite new 08/05/2016
> >
> > Most of the messages fly straight off the screen, the journal isn't kept
> > and the wifi driver also complains, will see if I can get a slow motion
> > capture of the errors and screen shot them
> >
> > Regards
> >
> > Mike
> >
> > On Sat, 26 Nov 2016 at 10:20 Peter Wu <peter at lekensteyn.nl> wrote:
> >
> > Hi Mike,
> >
> > On Sat, Nov 26, 2016 at 12:36:27AM +0000, Mike Lothian wrote:
> > > This patch is preventing my laptop from booting, I'm getting D3 error
> > > messages and atom bios stuck messages
> >
> > Can you post a dmesg and acpidump? What was the previous working kernel?
> > I suppose your BIOS date (/sys/class/dmi/id/bios_date) is pre-2015?
> > Does booting with runpm=0 work?
> >
> > > I mistakenly saw the v2 patch and didn't realise it was for radeon not
> > > amdgpu - this branch and Linus's tree are currently not booting for me
> >
> > What do you mean by this?
> >
> > Kind regards,
> > Peter
> >
> > > On Wed, 23 Nov 2016 at 17:16 Deucher, Alexander <
> > Alexander.Deucher at amd.com>
> > > wrote:
> > >
> > > > > -----Original Message-----
> > > > > From: Peter Wu [mailto:peter at lekensteyn.nl]
> > > > > Sent: Wednesday, November 23, 2016 12:13 PM
> > > > > To: Alex Deucher
> > > > > Cc: amd-gfx list; Deucher, Alexander; Nayan Deshmukh
> > > > > Subject: Re: [PATCH 1/2] drm/amdgpu: fix power state when port pm
is
> > > > > unavailable
> > > > >
> > > > > On Wed, Nov 23, 2016 at 12:01:55PM -0500, Alex Deucher wrote:
> > > > > >  On Tue, Nov 22, 2016 at 8:22 PM, Peter Wu <peter at lekensteyn.nl>
> > > > wrote:
> > > > > > > When PCIe port PM is not enabled (system BIOS is pre-2015 or
the
> > > > > > > pcie_port_pm=off parameter is set), legacy ATPX PM should
still
> > be
> > > > > > > marked as supported. Otherwise the GPU can fail to power on
after
> > > > > > > runtime suspend. This affected a Dell Inspiron 5548.
> > > > > > >
> > > > > > > Ideally the BIOS date in the PCI core is lowered to 2013 (the
> > first
> > > > year
> > > > > > > where hybrid graphics platforms using power resources was
> > > > introduced),
> > > > > > > but that seems more risky at this point and would not solve
the
> > > > > > > pcie_port_pm=off issue.
> > > > > > >
> > > > > > > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98505
> > > > > > > Reported-and-tested-by: Nayan Deshmukh
> > > > > <nayan26deshmukh at gmail.com>
> > > > > > > Signed-off-by: Peter Wu <peter at lekensteyn.nl>
> > > > > > > ---
> > > > > > > Hi,
> > > > > > >
> > > > > > > This patch is already three weeks old. One alternative idea
was
> > > > lowering
> > > > > BIOS
> > > > > > > date in PCI core, but as pcie_port_pm=force did not have the
> > desired
> > > > > effect, I
> > > > > > > do not think that this would help though.
> > > > > >
> > > > > > Thanks for doing this.
> > > > > >
> > > > > > >
> > > > > > > I have also not contacted linux-pci or Mika about lowering the
> > year
> > > > due to
> > > > > the
> > > > > > > lack of a good reason.  Might do it later though once ACPICA
bug
> > > > 1333 is
> > > > > sorted
> > > > > > > out such that lowering the year actually has benefits for a
> > Nvidia
> > > > laptop
> > > > > (or if
> > > > > > > some amdgpu problem can be solved by this).
> > > > > > >
> > > > > > > Both patches should probably be Cc stable (4.8+), fixing
> > > > 2f5af82eeab2 and
> > > > > > > b8c9fd5ad4b4 ("track whether if this is a hybrid graphics
> > > > platform"). There
> > > > > have
> > > > > > > been some ifdef 0's and reverts in between, so I was not sure
if
> > > > adding
> > > > > the
> > > > > > > Fixes tag is appropriate.
> > > > > >
> > > > > > I don't think we need to cc stable.  In kernel 4.8 we don't
> > attempt to
> > > > > > do d3cold at all.  4.8 and older kernels have:
> > > > > > c63695cc5e5f685e924e25a8f9555f6e846f1fc6 (drm/amdgpu: work
around
> > > > > lack
> > > > > > of upstream ACPI support for D3cold)
> > > > > > which was reverted for 4.9.
> > > > >
> > > > > That patch was already reverted in 4.8 as far as I can see:
> > > > >
> > > > > $ git tag --contains c39b487f195b93235ee76384427467786f7bf29f |
grep
> > v4.8
> > > > > v4.8
> > > > >
> > > > > Can you double-check? v4.8 was the first kernel with D3cold
support
> > in
> > > > > PCI core.
> > > >
> > > > You are right.  I was thinking d3cold went upstream in 4.9, so yes,
we
> > > > should apply this to 4.8.
> > > >
> > > > Alex
> > > >
> > > > >
> > > > > > Series is:
> > > > > > Reviewed-by: Alex Deucher <alexander.deucher at amd.com>
> > > > >
> > > > > Thanks!
> > > > >
> > > > > Kind regards,
> > > > > Peter
> > > > >
> > > > > >
> > > > > > >
> > > > > > > Kind regards,
> > > > > > > Peter
> > > > > > > ---
> > > > > > >  drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c | 9
++++++++-
> > > > > > >  1 file changed, 8 insertions(+), 1 deletion(-)
> > > > > > >
> > > > > > > diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c
> > > > > b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c
> > > > > > > index 10b5ddf..951addf 100644
> > > > > > > --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c
> > > > > > > +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c
> > > > > > > @@ -33,6 +33,7 @@ struct amdgpu_atpx {
> > > > > > >
> > > > > > >  static struct amdgpu_atpx_priv {
> > > > > > >         bool atpx_detected;
> > > > > > > +       bool bridge_pm_usable;
> > > > > > >         /* handle for device - and atpx */
> > > > > > >         acpi_handle dhandle;
> > > > > > >         acpi_handle other_handle;
> > > > > > > @@ -200,7 +201,11 @@ static int amdgpu_atpx_validate(struct
> > > > > amdgpu_atpx *atpx)
> > > > > > >         atpx->is_hybrid = false;
> > > > > > >         if (valid_bits & ATPX_MS_HYBRID_GFX_SUPPORTED) {
> > > > > > >                 printk("ATPX Hybrid Graphics\n");
> > > > > > > -               atpx->functions.power_cntl = false;
> > > > > > > +               /*
> > > > > > > +                * Disable legacy PM methods only when pcie
port
> > PM
> > > > is usable,
> > > > > > > +                * otherwise the device might fail to power
off
> > or
> > > > power on.
> > > > > > > +                */
> > > > > > > +               atpx->functions.power_cntl =
> > > > > !amdgpu_atpx_priv.bridge_pm_usable;
> > > > > > >                 atpx->is_hybrid = true;
> > > > > > >         }
> > > > > > >
> > > > > > > @@ -471,6 +476,7 @@ static int amdgpu_atpx_power_state(enum
> > > > > vga_switcheroo_client_id id,
> > > > > > >   */
> > > > > > >  static bool amdgpu_atpx_pci_probe_handle(struct pci_dev
*pdev)
> > > > > > >  {
> > > > > > > +       struct pci_dev *parent_pdev =
pci_upstream_bridge(pdev);
> > > > > > >         acpi_handle dhandle, atpx_handle;
> > > > > > >         acpi_status status;
> > > > > > >
> > > > > > > @@ -485,6 +491,7 @@ static bool
> > > > > amdgpu_atpx_pci_probe_handle(struct pci_dev *pdev)
> > > > > > >         }
> > > > > > >         amdgpu_atpx_priv.dhandle = dhandle;
> > > > > > >         amdgpu_atpx_priv.atpx.handle = atpx_handle;
> > > > > > > +       amdgpu_atpx_priv.bridge_pm_usable = parent_pdev &&
> > > > > parent_pdev->bridge_d3;
> > > > > > >         return true;
> > > > > > >  }
> > > > > > >
> > > > > > > --
> > > > > > > 2.10.2
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/amd-gfx/attachments/20161126/f52bdedf/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: acpidump.xz
Type: application/octet-stream
Size: 153088 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/amd-gfx/attachments/20161126/f52bdedf/attachment-0001.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dmesg.amdgpu.xz
Type: application/x-xz
Size: 14956 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/amd-gfx/attachments/20161126/f52bdedf/attachment-0001.xz>


[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux