On Thu, Jul 28, 2016 at 05:40:31PM +0200, Lukas Wunner wrote: > On Thu, Jul 28, 2016 at 03:33:25PM +0000, Deucher, Alexander wrote: > > > From: Peter Wu [mailto:peter at lekensteyn.nl] > > > Sent: Thursday, July 21, 2016 6:43 AM > > > In case you missed it, Dave's D3cold patches were succeeded by changes > > > in PCI core. Relevant commits in the pci/pm branch: > > > > > > 006d44e PCI: Add runtime PM support for PCIe ports > > > 16468c7 ACPI / hotplug / PCI: Runtime resume bridge before rescan > > > d963f65 PCI: Power on bridges before scanning new devices > > > 9d26d3a PCI: Put PCIe ports into D3 during suspend > > > 43f7f88 PCI: Don't clear d3cold_allowed for PCIe ports > > > > Did those get merged yet? > > They will go into 4.8. Should have gone into 4.7 already but were > dropped at the last minute. > > > > I just need to revert this commit once the d3cold patches land: > > https://cgit.freedesktop.org/~agd5f/linux/commit/?h=drm-next-4.8&id=bdfb76040068d960cb9e226876be8a508d741c4a > > So you probably need to revert this now. > > Best regards, > Lukas It is better to revert it before the PCI/PM patches get merged, otherwise you risk that the device is already put in D3 before the bridge tries to do it again. This is currently happening with nouveau on -next. Do these AMD hw exist on BIOSes pre-2015? Currently the D3cold work in the PCI/PM branch only enable the D3cold handling via the bridge when the BIOS is >= 2015. -- Kind regards, Peter Wu https://lekensteyn.nl
