The current code assumes that the power is turned off in SND_SOC_BIAS_OFF. If there are no actual regulator the codec isn't turned off and the registers are not reset to their default values but the regcache is still marked as dirty. Thus a value might not be written to the hardware if it is set to the default value. Do a software reset before turning off the power to make sure the registers are always reset to their default states. Signed-off-by: Michael Walle <michael@xxxxxxxx> --- sound/soc/codecs/wm8904.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 2a7d23a5daa8..7d7ea15d73e0 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -1933,6 +1933,7 @@ static int wm8904_set_bias_level(struct snd_soc_component *component, snd_soc_component_update_bits(component, WM8904_BIAS_CONTROL_0, WM8904_BIAS_ENA, 0); + snd_soc_component_write(component, WM8904_SW_RESET_AND_ID, 0); regcache_cache_only(wm8904->regmap, true); regcache_mark_dirty(wm8904->regmap); -- 2.20.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
