From: Ben Zhang <benzh@xxxxxxxxxxxx> The codec dies when RT5677_PWR_ANLG2(MX-64h) is set to 0xACE1 while it's streaming audio over SPI. The DSP firmware turns on PLL2 (MX-64 bit 8) when SPI streaming starts. However regmap does not believe that register can change by itself. When BST1 (bit 15) is turned on with regmap_update_bits(), it doesn't read the register first before write, so PLL2 power bit is cleared by accident. Marking MX-64h as volatile in regmap solved the issue. Signed-off-by: Ben Zhang <benzh@xxxxxxxxxxxx> Signed-off-by: Curtis Malainey <cujomalainey@xxxxxxxxxxxx> --- sound/soc/codecs/rt5677.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c index ea235f3874ca..e5db9dc60378 100644 --- a/sound/soc/codecs/rt5677.c +++ b/sound/soc/codecs/rt5677.c @@ -302,6 +302,7 @@ static bool rt5677_volatile_register(struct device *dev, unsigned int reg) case RT5677_I2C_MASTER_CTRL7: case RT5677_I2C_MASTER_CTRL8: case RT5677_HAP_GENE_CTRL2: + case RT5677_PWR_ANLG2: /* Modified by DSP firmware */ case RT5677_PWR_DSP_ST: case RT5677_PRIV_DATA: case RT5677_ASRC_22: -- 2.24.0.rc1.363.gb1bccd3e3d-goog _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
