For Focusrite Saffire Pro i/o, the lowest 8 bits of register represents
configured source of sampling clock. The next lowest 8 bits represents
whether the configured source is actually detected or not just after
the register is changed for the source.
Current implementation evaluates whole the register to detect configured
source. This results in failure due to the next lowest 8 bits when the
source is connected in advance.
This commit fixes the bug.
Fixes: 25784ec2d034 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series")
Cc: <stable@xxxxxxxxxxxxxxx> # v3.16+
Signed-off-by: Takashi Sakamoto <o-takashi@xxxxxxxxxxxxx>
---
sound/firewire/bebob/bebob_focusrite.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/sound/firewire/bebob/bebob_focusrite.c b/sound/firewire/bebob/bebob_focusrite.c
index 32b864bee25f..06d6a37cd853 100644
--- a/sound/firewire/bebob/bebob_focusrite.c
+++ b/sound/firewire/bebob/bebob_focusrite.c
@@ -27,6 +27,8 @@
#define SAFFIRE_CLOCK_SOURCE_SPDIF 1
/* clock sources as returned from register of Saffire Pro 10 and 26 */
+#define SAFFIREPRO_CLOCK_SOURCE_SELECT_MASK 0x000000ff
+#define SAFFIREPRO_CLOCK_SOURCE_DETECT_MASK 0x0000ff00
#define SAFFIREPRO_CLOCK_SOURCE_INTERNAL 0
#define SAFFIREPRO_CLOCK_SOURCE_SKIP 1 /* never used on hardware */
#define SAFFIREPRO_CLOCK_SOURCE_SPDIF 2
@@ -189,6 +191,7 @@ saffirepro_both_clk_src_get(struct snd_bebob *bebob, unsigned int *id)
map = saffirepro_clk_maps[1];
/* In a case that this driver cannot handle the value of register. */
+ value &= SAFFIREPRO_CLOCK_SOURCE_SELECT_MASK;
if (value >= SAFFIREPRO_CLOCK_SOURCE_COUNT || map[value] < 0) {
err = -EIO;
goto end;
--
2.20.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
