From: Shuming Fan <shumingf@xxxxxxxxxxx>
There are unnecessary tabs inside some statements.
It uses sapces instead.
Signed-off-by: Shuming Fan <shumingf@xxxxxxxxxxx>
---
sound/soc/codecs/rt1011.c | 45 +++++++++++++++++++--------------------
1 file changed, 22 insertions(+), 23 deletions(-)
diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c
index 57a3a34b5f18..2f1de933f3ac 100644
--- a/sound/soc/codecs/rt1011.c
+++ b/sound/soc/codecs/rt1011.c
@@ -989,7 +989,7 @@ static SOC_ENUM_SINGLE_DECL(rt1011_din_source_enum, RT1011_CROSS_BQ_SET_1, 5,
static const char * const rt1011_tdm_data_out_select[] = {
"TDM_O_LR", "BQ1", "DVOL", "BQ10", "ALC", "DMIX", "ADC_SRC_LR",
- "ADC_O_LR", "ADC_MONO", "RSPK_BPF_LR", "DMIX_ADD", "ENVELOPE_FS",
+ "ADC_O_LR", "ADC_MONO", "RSPK_BPF_LR", "DMIX_ADD", "ENVELOPE_FS",
"SEP_O_GAIN", "ALC_BK_GAIN", "STP_V_C", "DMIX_ABST"
};
@@ -1002,7 +1002,7 @@ static SOC_ENUM_SINGLE_DECL(rt1011_tdm2_l_dac1_enum, RT1011_TDM2_SET_4, 12,
rt1011_tdm_l_ch_data_select);
static SOC_ENUM_SINGLE_DECL(rt1011_tdm1_adc1_dat_enum,
- RT1011_ADCDAT_OUT_SOURCE, 0, rt1011_tdm_data_out_select);
+ RT1011_ADCDAT_OUT_SOURCE, 0, rt1011_tdm_data_out_select);
static SOC_ENUM_SINGLE_DECL(rt1011_tdm1_adc1_loc_enum, RT1011_TDM1_SET_2, 0,
rt1011_tdm_l_ch_data_select);
@@ -1024,9 +1024,9 @@ static const char * const rt1011_tdm_adc_swap_select[] = {
"L/R", "R/L", "L/L", "R/R"
};
-static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc1_1_enum, RT1011_TDM1_SET_3, 6,
+static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc1_1_enum, RT1011_TDM1_SET_3, 6,
rt1011_tdm_adc_swap_select);
-static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc2_1_enum, RT1011_TDM1_SET_3, 4,
+static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc2_1_enum, RT1011_TDM1_SET_3, 4,
rt1011_tdm_adc_swap_select);
static void rt1011_reset(struct regmap *regmap)
@@ -1092,9 +1092,9 @@ static bool rt1011_validate_bq_drc_coeff(unsigned short reg)
{
if ((reg == RT1011_DAC_SET_1) |
(reg >= RT1011_ADC_SET && reg <= RT1011_ADC_SET_1) |
- (reg == RT1011_ADC_SET_4) | (reg == RT1011_ADC_SET_5) |
+ (reg == RT1011_ADC_SET_4) | (reg == RT1011_ADC_SET_5) |
(reg == RT1011_MIXER_1) |
- (reg == RT1011_A_TIMING_1) | (reg >= RT1011_POWER_7 &&
+ (reg == RT1011_A_TIMING_1) | (reg >= RT1011_POWER_7 &&
reg <= RT1011_POWER_8) |
(reg == RT1011_CLASS_D_POS) | (reg == RT1011_ANALOG_CTRL) |
(reg >= RT1011_SPK_TEMP_PROTECT_0 &&
@@ -1289,7 +1289,7 @@ static int rt1011_r0_load_mode_put(struct snd_kcontrol *kcontrol,
r0_integer = format / rt1011->r0_reg / 128;
r0_factor = ((format / rt1011->r0_reg * 100) / 128)
- (r0_integer * 100);
- dev_info(dev, "New r0 resistance about %d.%02d ohm, reg=0x%X\n",
+ dev_info(dev, "New r0 resistance about %d.%02d ohm, reg=0x%X\n",
r0_integer, r0_factor, rt1011->r0_reg);
if (rt1011->r0_reg)
@@ -1977,14 +1977,14 @@ static int rt1011_set_tdm_slot(struct snd_soc_dai *dai,
snd_soc_component_update_bits(component, RT1011_TDM1_SET_1,
RT1011_I2S_CH_TX_MASK | RT1011_I2S_CH_RX_MASK |
- RT1011_I2S_CH_TX_LEN_MASK | RT1011_I2S_CH_RX_LEN_MASK, val);
+ RT1011_I2S_CH_TX_LEN_MASK | RT1011_I2S_CH_RX_LEN_MASK, val);
snd_soc_component_update_bits(component, RT1011_TDM2_SET_1,
RT1011_I2S_CH_TX_MASK | RT1011_I2S_CH_RX_MASK |
- RT1011_I2S_CH_TX_LEN_MASK | RT1011_I2S_CH_RX_LEN_MASK, val);
+ RT1011_I2S_CH_TX_LEN_MASK | RT1011_I2S_CH_RX_LEN_MASK, val);
snd_soc_component_update_bits(component, RT1011_TDM1_SET_2,
- RT1011_TDM_I2S_DOCK_EN_1_MASK, tdm_en);
+ RT1011_TDM_I2S_DOCK_EN_1_MASK, tdm_en);
snd_soc_component_update_bits(component, RT1011_TDM2_SET_2,
- RT1011_TDM_I2S_DOCK_EN_2_MASK, tdm_en);
+ RT1011_TDM_I2S_DOCK_EN_2_MASK, tdm_en);
if (tx_slotnum)
snd_soc_component_update_bits(component, RT1011_TDM_TOTAL_SET,
RT1011_ADCDAT1_PIN_CONFIG | RT1011_ADCDAT2_PIN_CONFIG,
@@ -2109,7 +2109,7 @@ static const struct snd_soc_component_driver soc_component_dev_rt1011 = {
.remove = rt1011_remove,
.suspend = rt1011_suspend,
.resume = rt1011_resume,
- .set_bias_level = rt1011_set_bias_level,
+ .set_bias_level = rt1011_set_bias_level,
.controls = rt1011_snd_controls,
.num_controls = ARRAY_SIZE(rt1011_snd_controls),
.dapm_widgets = rt1011_dapm_widgets,
@@ -2118,9 +2118,9 @@ static const struct snd_soc_component_driver soc_component_dev_rt1011 = {
.num_dapm_routes = ARRAY_SIZE(rt1011_dapm_routes),
.set_sysclk = rt1011_set_component_sysclk,
.set_pll = rt1011_set_component_pll,
- .use_pmdown_time = 1,
- .endianness = 1,
- .non_legacy_dai_naming = 1,
+ .use_pmdown_time = 1,
+ .endianness = 1,
+ .non_legacy_dai_naming = 1,
};
static const struct regmap_config rt1011_regmap = {
@@ -2222,17 +2222,17 @@ static int rt1011_calibrate(struct rt1011_priv *rt1011, unsigned char cali_flag)
dc_offset = value << 16;
regmap_read(rt1011->regmap, RT1011_EFUSE_ADC_OFFSET_15_0, &value);
dc_offset |= (value & 0xffff);
- dev_info(dev, "ADC offset=0x%x\n", dc_offset);
+ dev_info(dev, "ADC offset=0x%x\n", dc_offset);
regmap_read(rt1011->regmap, RT1011_EFUSE_DAC_OFFSET_G0_20_16, &value);
dc_offset = value << 16;
regmap_read(rt1011->regmap, RT1011_EFUSE_DAC_OFFSET_G0_15_0, &value);
dc_offset |= (value & 0xffff);
- dev_info(dev, "Gain0 offset=0x%x\n", dc_offset);
+ dev_info(dev, "Gain0 offset=0x%x\n", dc_offset);
regmap_read(rt1011->regmap, RT1011_EFUSE_DAC_OFFSET_G1_20_16, &value);
dc_offset = value << 16;
regmap_read(rt1011->regmap, RT1011_EFUSE_DAC_OFFSET_G1_15_0, &value);
dc_offset |= (value & 0xffff);
- dev_info(dev, "Gain1 offset=0x%x\n", dc_offset);
+ dev_info(dev, "Gain1 offset=0x%x\n", dc_offset);
if (cali_flag) {
@@ -2252,7 +2252,7 @@ static int rt1011_calibrate(struct rt1011_priv *rt1011, unsigned char cali_flag)
while (count < chk_cnt) {
msleep(100);
regmap_read(rt1011->regmap,
- RT1011_INIT_RECIPROCAL_SYN_24_16, &value);
+ RT1011_INIT_RECIPROCAL_SYN_24_16, &value);
r0[count%3] = value << 16;
regmap_read(rt1011->regmap,
RT1011_INIT_RECIPROCAL_SYN_15_0, &value);
@@ -2267,7 +2267,7 @@ static int rt1011_calibrate(struct rt1011_priv *rt1011, unsigned char cali_flag)
break;
}
if (count > chk_cnt) {
- dev_err(dev, "Calibrate R0 Failure\n");
+ dev_err(dev, "Calibrate R0 Failure\n");
ret = -EAGAIN;
} else {
format = 2147483648U; /* 2^24 * 128 */
@@ -2276,7 +2276,7 @@ static int rt1011_calibrate(struct rt1011_priv *rt1011, unsigned char cali_flag)
- (r0_integer * 100);
rt1011->r0_reg = r0[0];
rt1011->cali_done = 1;
- dev_info(dev, "r0 resistance about %d.%02d ohm, reg=0x%X\n",
+ dev_info(dev, "r0 resistance about %d.%02d ohm, reg=0x%X\n",
r0_integer, r0_factor, r0[0]);
}
}
@@ -2354,7 +2354,7 @@ static void rt1011_calibration_work(struct work_struct *work)
r0_integer = format / rt1011->r0_reg / 128;
r0_factor = ((format / rt1011->r0_reg * 100) / 128)
- (r0_integer * 100);
- dev_info(component->dev, "DP r0 resistance about %d.%02d ohm, reg=0x%X\n",
+ dev_info(component->dev, "DP r0 resistance about %d.%02d ohm, reg=0x%X\n",
r0_integer, r0_factor, rt1011->r0_reg);
rt1011_r0_load(rt1011);
@@ -2420,7 +2420,6 @@ static void rt1011_i2c_shutdown(struct i2c_client *client)
rt1011_reset(rt1011->regmap);
}
-
static struct i2c_driver rt1011_i2c_driver = {
.driver = {
.name = "rt1011",
--
2.23.0
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
