From: Jiada Wang <jiada_wang@xxxxxxxxxx>
According to R-Car3 HW manual 40.3.3 (Data Format on Audio Local Bus),
in case of monaural data writing or reading through Audio-DMAC,
it's always in Left Justified format, so both src and dst
DMA Bus width should be equal to physical data width.
Therefore set src and dst's DMA bus width to:
- [monaural case] data width
- [non-monaural case] 32bits (as prior applying the patch)
Cc: Andrew Gabbasov <andrew_gabbasov@xxxxxxxxxx>
Cc: Timo Wischer <twischer@xxxxxxxxxxxxxx>
Signed-off-by: Jiada Wang <jiada_wang@xxxxxxxxxx>
Signed-off-by: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
---
sound/soc/sh/rcar/dma.c | 30 ++++++++++++++++++++++++++++--
1 file changed, 28 insertions(+), 2 deletions(-)
diff --git a/sound/soc/sh/rcar/dma.c b/sound/soc/sh/rcar/dma.c
index 28f65eba2bb4..95aa26d62e4f 100644
--- a/sound/soc/sh/rcar/dma.c
+++ b/sound/soc/sh/rcar/dma.c
@@ -165,14 +165,40 @@ static int rsnd_dmaen_start(struct rsnd_mod *mod,
struct device *dev = rsnd_priv_to_dev(priv);
struct dma_async_tx_descriptor *desc;
struct dma_slave_config cfg = {};
+ enum dma_slave_buswidth buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
int is_play = rsnd_io_is_play(io);
int ret;
+ /*
+ * in case of monaural data writing or reading through Audio-DMAC
+ * data is always in Left Justified format, so both src and dst
+ * DMA Bus width need to be set equal to physical data width.
+ */
+ if (rsnd_runtime_channel_original(io) == 1) {
+ struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io);
+ int bits = snd_pcm_format_physical_width(runtime->format);
+
+ switch (bits) {
+ case 8:
+ buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ break;
+ case 16:
+ buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
+ break;
+ case 32:
+ buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ break;
+ default:
+ dev_err(dev, "invalid format width %d\n", bits);
+ return -EINVAL;
+ }
+ }
+
cfg.direction = is_play ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
cfg.src_addr = dma->src_addr;
cfg.dst_addr = dma->dst_addr;
- cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ cfg.src_addr_width = buswidth;
+ cfg.dst_addr_width = buswidth;
dev_dbg(dev, "%s %pad -> %pad\n",
rsnd_mod_name(mod),
--
2.23.0
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
