When upgrading from 5.2 to 5.3, I now encounter this error after boot: ==================================== WARNING: pulseaudio/1297 still has locks held! 5.3.0+ #1826 Not tainted ------------------------------------ 1 lock held by pulseaudio/1297: #0: ee815308 (&hcp->lock){....}, at: hdmi_codec_startup+0x20/0x130 stack backtrace: CPU: 0 PID: 1297 Comm: pulseaudio Not tainted 5.3.0+ #1826 Hardware name: Marvell Dove (Cubox) [<c0017b4c>] (unwind_backtrace) from [<c0014d10>] (show_stack+0x10/0x14) [<c0014d10>] (show_stack) from [<c00a2d18>] (futex_wait_queue_me+0x13c/0x19c) [<c00a2d18>] (futex_wait_queue_me) from [<c00a3630>] (futex_wait+0x184/0x24c) [<c00a3630>] (futex_wait) from [<c00a5e1c>] (do_futex+0x334/0x598) [<c00a5e1c>] (do_futex) from [<c00a62e8>] (sys_futex_time32+0x118/0x180) [<c00a62e8>] (sys_futex_time32) from [<c0009000>] (ret_fast_syscall+0x0/0x54) Exception stack(0xebd31fa8 to 0xebd31ff0) 1fa0: 00000000 ffffffff 000c8748 00000189 00000001 00000000 1fc0: 00000000 ffffffff 00000000 000000f0 00000000 00000000 00000000 00056200 1fe0: 000000f0 beac03a8 b6d6c835 b6d6f456 This seems to be caused by: eb1ecadb7f67 ("ASoC: hdmi-codec: re-introduce mutex locking") which holds a mutex and returns to userspace. Meanwhile, userspace issues a futex operation, which ends up in futex_wait_queue_me(). futex_wait_queue_me() can wait, and if the system will be hibernating, is a potential hibernation point. One of the requirements there is that no locks shall be held, and the freezer code verifies that by calling debug_check_no_locks_held(). With lockdep enabled, it reveals that hdmi-codec is indeed holding a lock. Reverting this commit solves the problem. -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up According to speedtest.net: 11.9Mbps down 500kbps up _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel