Hi Hin-Tak, Maybe it is not the correct pcm name. I guess the correct one is "hw:seeed8micvoicec,0". Could you try it? By the way, you can also use aplay -D {device_name} to make sure whether the name is correct or not. Best, Yu-Hsuan Hin-Tak Leung <htl10@xxxxxxxxxxxxxxxxxxxxx> 於 2019年10月18日 週五 下午6:56寫道: > > > On Friday, 18 October 2019, 04:27:29 BST, Yu-hsuan Hsu <yuhsuan@xxxxxxxxxx> wrote: > > > How about using index instead? You should find the card index and device index by running "aplay -l" command. The pcm format is hw:{CARD_INDEX},{DEVICE_INDEX}. > > See example part in https://chromium.googlesource.com/chromiumos/platform/audiotest/+/refs/heads/master/alsa_conformance_test.md for more information. > > Dear Yu-Hsuan, > > Yes, using card index and device index works. Here is the output: > > $ aplay -l > **** List of PLAYBACK Hardware Devices **** > card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA] > Subdevices: 7/7 > Subdevice #0: subdevice #0 > Subdevice #1: subdevice #1 > Subdevice #2: subdevice #2 > Subdevice #3: subdevice #3 > Subdevice #4: subdevice #4 > Subdevice #5: subdevice #5 > Subdevice #6: subdevice #6 > card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > card 0: ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > card 1: seeed8micvoicec [seeed-8mic-voicecard], device 0: bcm2835-i2s-ac10x-codec0 ac10x-codec.1-0035-0 [] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > > As I mentioned earlier I am interested in card 1, the seeed8micvoicec entry. Here it is the conformance test output: > > > 20 passed, 0 failed > Device Information > Name: hw:CARD=1,0 > Stream: PLAYBACK > Format: ['S32_LE'] > Channels: [8] > Rate: [8000, 11025, 16000, 22050, 44100, 48000] > Period_size range: [8, 8192] > Buffer_size range: [16, 16384] > Test Params > Set channels 8: pass > Set format S32_LE: pass > Set rate 8000: pass > Set rate 11025: pass > Set rate 16000: pass > Set rate 22050: pass > Set rate 44100: pass > Set rate 48000: pass > Test Rates > Set rate 8000: pass > Set rate 11025: pass > Set rate 16000: pass > Set rate 22050: pass > Set rate 44100: pass > Set rate 48000: pass > Test All Pairs > Set channels 8, format S32_LE, rate 8000: pass > Set channels 8, format S32_LE, rate 11025: pass > Set channels 8, format S32_LE, rate 16000: pass > Set channels 8, format S32_LE, rate 22050: pass > Set channels 8, format S32_LE, rate 44100: pass > Set channels 8, format S32_LE, rate 48000: pass > > There is probably a bug somewhere on not being able to use the card name? > > Regards, > Hin-Tak _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel