On 9/25/19 11:57 AM, sathya.prakash.m.r@xxxxxxxxx wrote:
From: Sathya Prakash M R <sathya.prakash.m.r@xxxxxxxxx> The series adds CML m/c driver with RT5682 on SSP0 and RT1011 on SSP1. The RT1011 is smart AMP which supports 2 Whoofers and 2 tweeter support. RT5682 is headset codec supporting playback and record. The m/c supports HDMI playback and DMIC record. Naveen Manohar (2): ASoC: Intel: boards: Add CML m/c using RT1011 and RT5682 ASoC: Intel: Add acpi match for rt1011 based m/c driver sound/soc/intel/boards/Kconfig | 18 + sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/cml_rt1011_rt5682.c | 473 ++++++++++++++++++++++ sound/soc/intel/common/soc-acpi-intel-cnl-match.c | 7 + 4 files changed, 500 insertions(+) create mode 100644 sound/soc/intel/boards/cml_rt1011_rt5682.c -- V3 Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
Mark, I noticed this morning while rebasing SOF on your tree that those two patches have not been merged. Not sure if they were missed (the 4 versions were confusing), if you didn't see my Acked-by tag or if there was an objection? No real urgency except for likely conflicts with Kai's work on the HDMI side if we delay, and I think Morimoto-san is also preparing additional nice simplifications for codec-dais.
Thanks and have a nice weekend.
Changes from V3: repost with more recipients and edits to commit messages Changes from V2: re ordered match table to ensure non i2c device matches are at the end Changes from V1: Addressed comments on ASoC: Intel: boards: Add CML m/c using RT1011 and RT5682 1.9.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
_______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
