From: Edward Cragg <edward.cragg@xxxxxxxxxxxxxxx>
The CIF configuration and clock setting is currently hard coded for 2
channels. Since the hardware is capable of supporting 1-8 channels add
support for reading the channel count from the supplied parameters to
allow for better TDM support. It seems the original implementation of this
driver was fixed at 2 channels for simplicity, and not implementing TDM.
Signed-off-by: Edward Cragg <edward.cragg@xxxxxxxxxxxxxxx>
[ben.dooks@xxxxxxxxxxxxxxx: added is_tdm and channel nr check]
[ben.dooks@xxxxxxxxxxxxxxx: merge edge control into set-format]
[ben.dooks@xxxxxxxxxxxxxxx: removed is_tdm and moved edge to hw_params]
Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
---
v2:
- fix the lrclk for dsp-b format
---
sound/soc/tegra/tegra30_i2s.c | 21 +++++++++++++--------
1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c
index 063f34c882af..fc77e65a3646 100644
--- a/sound/soc/tegra/tegra30_i2s.c
+++ b/sound/soc/tegra/tegra30_i2s.c
@@ -67,6 +67,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
{
struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
unsigned int mask = 0, val = 0;
+ unsigned int ch_mask, ch_val = 0;
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
@@ -75,6 +76,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
return -EINVAL;
}
+ ch_mask = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_MASK;
mask |= TEGRA30_I2S_CTRL_MASTER_ENABLE;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
@@ -90,10 +92,12 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
TEGRA30_I2S_CTRL_LRCK_MASK;
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_DSP_A:
+ ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_NEG_EDGE;
val |= TEGRA30_I2S_CTRL_FRAME_FORMAT_FSYNC;
val |= TEGRA30_I2S_CTRL_LRCK_L_LOW;
break;
case SND_SOC_DAIFMT_DSP_B:
+ ch_val = TEGRA30_I2S_CH_CTRL_EGDE_CTRL_POS_EDGE;
val |= TEGRA30_I2S_CTRL_FRAME_FORMAT_FSYNC;
val |= TEGRA30_I2S_CTRL_LRCK_R_LOW;
break;
@@ -115,6 +119,7 @@ static int tegra30_i2s_set_fmt(struct snd_soc_dai *dai,
pm_runtime_get_sync(dai->dev);
regmap_update_bits(i2s->regmap, TEGRA30_I2S_CTRL, mask, val);
+ regmap_update_bits(i2s->regmap, TEGRA30_I2S_CH_CTRL, ch_mask, ch_val);
pm_runtime_put(dai->dev);
return 0;
@@ -127,10 +132,11 @@ static int tegra30_i2s_hw_params(struct snd_pcm_substream *substream,
struct device *dev = dai->dev;
struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
unsigned int mask, val, reg;
- int ret, sample_size, srate, i2sclock, bitcnt, audio_bits;
+ int ret, sample_size, srate, i2sclock, bitcnt, audio_bits, channels;
struct tegra30_ahub_cif_conf cif_conf;
- if (params_channels(params) != 2)
+ channels = params_channels(params);
+ if (channels > 8)
return -EINVAL;
mask = TEGRA30_I2S_CTRL_BIT_SIZE_MASK;
@@ -157,9 +163,8 @@ static int tegra30_i2s_hw_params(struct snd_pcm_substream *substream,
regmap_update_bits(i2s->regmap, TEGRA30_I2S_CTRL, mask, val);
srate = params_rate(params);
-
/* Final "* 2" required by Tegra hardware */
- i2sclock = srate * params_channels(params) * sample_size * 2;
+ i2sclock = srate * channels * sample_size * 2;
bitcnt = (i2sclock / (2 * srate)) - 1;
if (bitcnt < 0 || bitcnt > TEGRA30_I2S_TIMING_CHANNEL_BIT_COUNT_MASK_US)
@@ -179,8 +184,8 @@ static int tegra30_i2s_hw_params(struct snd_pcm_substream *substream,
regmap_write(i2s->regmap, TEGRA30_I2S_TIMING, val);
cif_conf.threshold = 0;
- cif_conf.audio_channels = 2;
- cif_conf.client_channels = 2;
+ cif_conf.audio_channels = channels;
+ cif_conf.client_channels = channels;
cif_conf.audio_bits = audio_bits;
cif_conf.client_bits = audio_bits;
cif_conf.expand = 0;
@@ -315,7 +320,7 @@ static const struct snd_soc_dai_driver tegra30_i2s_dai_template = {
.playback = {
.stream_name = "Playback",
.channels_min = 2,
- .channels_max = 2,
+ .channels_max = 8,
.rates = SNDRV_PCM_RATE_8000_96000,
.formats = SNDRV_PCM_FMTBIT_S32_LE |
SNDRV_PCM_FMTBIT_S24_LE |
@@ -324,7 +329,7 @@ static const struct snd_soc_dai_driver tegra30_i2s_dai_template = {
.capture = {
.stream_name = "Capture",
.channels_min = 2,
- .channels_max = 2,
+ .channels_max = 8,
.rates = SNDRV_PCM_RATE_8000_96000,
.formats = SNDRV_PCM_FMTBIT_S32_LE |
SNDRV_PCM_FMTBIT_S24_LE |
--
2.23.0
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
