On Thu, Oct 10, 2019 at 4:08 PM Rob Herring <robh@xxxxxxxxxx> wrote: > > On Thu, Oct 10, 2019 at 09:42:34AM +0200, Nuno Sá wrote: > > Document the ADAU7118 8 channel PDM to I2S/TDM converter devicetree > > bindings. > > > > Signed-off-by: Nuno Sá <nuno.sa@xxxxxxxxxx> > > --- > > Changes in v2: > > * List regulators as required; > > > > Changes in v3: > > * Set the correct license for new bindings. > > > > .../bindings/sound/adi,adau7118.yaml | 90 +++++++++++++++++++ > > 1 file changed, 90 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/sound/adi,adau7118.yaml Looks like Mark already applied this. Please send a follow-up patch addressing my comments. > > > > diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml > > new file mode 100644 > > index 000000000000..cfcef602b3d9 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml > > @@ -0,0 +1,90 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/sound/adi,adau7118.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > + > > +title: Analog Devices ADAU7118 8 Channel PDM to I2S/TDM Converter > > + > > +maintainers: > > + - Nuno Sá <nuno.sa@xxxxxxxxxx> > > + > > +description: | > > + Analog Devices ADAU7118 8 Channel PDM to I2S/TDM Converter over I2C or HW > > + standalone mode. > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU7118.pdf > > + > > +properties: > > + compatible: > > + enum: > > + - adi,adau7118 > > + > > + reg: > > + maxItems: 1 > > + > > + "#sound-dai-cells": > > + const: 0 > > + > > + IOVDD-supply: > > Use lowercase please. > > > + description: Digital Input/Output Power Supply. > > + $ref: "/schemas/types.yaml#/definitions/phandle" > > *-supply already has a type, so just a description is enough. > > > + > > + DVDD-supply: > > + description: Internal Core Digital Power Supply. > > + $ref: "/schemas/types.yaml#/definitions/phandle" > > Same here. > > > + > > + adi,decimation-ratio: > > + description: | > > + This property set's the decimation ratio of PDM to PCM audio data. > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32 > > + - enum: [64, 32, 16] > > + default: 64 > > + > > + adi,pdm-clk-map: > > + description: | > > + The ADAU7118 has two PDM clocks for the four Inputs. Each input must be > > + assigned to one of these two clocks. This property set's the mapping > > + between the clocks and the inputs. > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + - minItems: 4 > > + maxItems: 4 > > + items: > > + maximum: 1 > > + default: [0, 0, 1, 1] > > + > > +required: > > + - "#sound-dai-cells" > > + - compatible > > + - IOVDD-supply > > + - DVDD-supply > > + > > +examples: > > + - | > > + i2c0 { > > i2c { > > > + /* example with i2c support */ > > + #address-cells = <1>; > > + #size-cells = <0>; > > + status = "okay"; > > Don't show status in examples. > > > + adau7118_codec: adau7118-codec@14 { > > audio-codec@14 > > > + compatible = "adi,adau7118"; > > + reg = <14>; > > + #sound-dai-cells = <0>; > > + status = "okay"; > > + IOVDD-supply = <&supply>; > > + DVDD-supply = <&supply>; > > + adi,pdm-clk-map = <1 1 0 0>; > > + adi,decimation-ratio = <16>; > > + }; > > + }; > > + > > + /* example with hw standalone mode */ > > + adau7118_codec_hw: adau7118-codec-hw { > > + compatible = "adi,adau7118"; > > + #sound-dai-cells = <0>; > > + status = "okay"; > > + IOVDD-supply = <&supply>; > > + DVDD-supply = <&supply>; > > + }; > > -- > > 2.23.0 > > _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
