On Wed, Sep 18, 2019 at 08:33:50AM -0500, Pierre-Louis Bossart wrote: > On 9/18/19 5:48 AM, Mark Brown wrote: > > In DSP modes only one edge really matters anyway so it's not super > > important how long the pulse is. > There are exceptions to the rule. > In the early days of SOF, we had to provide support for amplifiers that did > require a pulse larger than a bit. In the SOF IPC we added an > 'frame_pulse_width' field to pass the configuration all the way from > topology to the firmware and Intel SSP driver. > The other quirk we added is the ability to control zero-padding per slot > instead of at the end of the frame, e.g. 1 bit of padding after 24 bits when > using 4 slots w/ 25 bits in a 100-bit frame. Neither of those is part of the core DSP mode definition though in the same way that constraints like MCLK or BCLK ratios aren't. They're modifiers on top.
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
