In case of WM1811 device there are currently being registered controls
referring to registers not existing on that device.
It has been noticed when getting values of "AIF1ADC2 Volume", "AIF1DAC2
Volume" controls was failing during ALSA state restoring at boot time:
"amixer: Mixer hw:0 load error: Device or resource busy"
Reading some registers through I2C was failing with EBUSY error and indeed
those registers were not available according to the datasheet.
To fix this controls not available on WM1811 are moved to a separate array
and registered only for WM8994 and WM8958.
There are some further differences between WM8994 and WM1811, e.g. registers
603h, 604h, 605h, which are not covered in this patch.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
---
sound/soc/codecs/wm8994.c | 43 +++++++++++++++++++++++----------------
1 file changed, 26 insertions(+), 17 deletions(-)
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index c3d06e8bc54f..d5fb7f5dd551 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -533,13 +533,10 @@ static SOC_ENUM_SINGLE_DECL(dac_osr,
static SOC_ENUM_SINGLE_DECL(adc_osr,
WM8994_OVERSAMPLING, 1, osr_text);
-static const struct snd_kcontrol_new wm8994_snd_controls[] = {
+static const struct snd_kcontrol_new wm8994_common_snd_controls[] = {
SOC_DOUBLE_R_TLV("AIF1ADC1 Volume", WM8994_AIF1_ADC1_LEFT_VOLUME,
WM8994_AIF1_ADC1_RIGHT_VOLUME,
1, 119, 0, digital_tlv),
-SOC_DOUBLE_R_TLV("AIF1ADC2 Volume", WM8994_AIF1_ADC2_LEFT_VOLUME,
- WM8994_AIF1_ADC2_RIGHT_VOLUME,
- 1, 119, 0, digital_tlv),
SOC_DOUBLE_R_TLV("AIF2ADC Volume", WM8994_AIF2_ADC_LEFT_VOLUME,
WM8994_AIF2_ADC_RIGHT_VOLUME,
1, 119, 0, digital_tlv),
@@ -556,8 +553,6 @@ SOC_ENUM("AIF2DACR Source", aif2dacr_src),
SOC_DOUBLE_R_TLV("AIF1DAC1 Volume", WM8994_AIF1_DAC1_LEFT_VOLUME,
WM8994_AIF1_DAC1_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
-SOC_DOUBLE_R_TLV("AIF1DAC2 Volume", WM8994_AIF1_DAC2_LEFT_VOLUME,
- WM8994_AIF1_DAC2_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
SOC_DOUBLE_R_TLV("AIF2DAC Volume", WM8994_AIF2_DAC_LEFT_VOLUME,
WM8994_AIF2_DAC_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
@@ -565,17 +560,12 @@ SOC_SINGLE_TLV("AIF1 Boost Volume", WM8994_AIF1_CONTROL_2, 10, 3, 0, aif_tlv),
SOC_SINGLE_TLV("AIF2 Boost Volume", WM8994_AIF2_CONTROL_2, 10, 3, 0, aif_tlv),
SOC_SINGLE("AIF1DAC1 EQ Switch", WM8994_AIF1_DAC1_EQ_GAINS_1, 0, 1, 0),
-SOC_SINGLE("AIF1DAC2 EQ Switch", WM8994_AIF1_DAC2_EQ_GAINS_1, 0, 1, 0),
SOC_SINGLE("AIF2 EQ Switch", WM8994_AIF2_EQ_GAINS_1, 0, 1, 0),
WM8994_DRC_SWITCH("AIF1DAC1 DRC Switch", WM8994_AIF1_DRC1_1, 2),
WM8994_DRC_SWITCH("AIF1ADC1L DRC Switch", WM8994_AIF1_DRC1_1, 1),
WM8994_DRC_SWITCH("AIF1ADC1R DRC Switch", WM8994_AIF1_DRC1_1, 0),
-WM8994_DRC_SWITCH("AIF1DAC2 DRC Switch", WM8994_AIF1_DRC2_1, 2),
-WM8994_DRC_SWITCH("AIF1ADC2L DRC Switch", WM8994_AIF1_DRC2_1, 1),
-WM8994_DRC_SWITCH("AIF1ADC2R DRC Switch", WM8994_AIF1_DRC2_1, 0),
-
WM8994_DRC_SWITCH("AIF2DAC DRC Switch", WM8994_AIF2_DRC_1, 2),
WM8994_DRC_SWITCH("AIF2ADCL DRC Switch", WM8994_AIF2_DRC_1, 1),
WM8994_DRC_SWITCH("AIF2ADCR DRC Switch", WM8994_AIF2_DRC_1, 0),
@@ -594,9 +584,6 @@ SOC_SINGLE("Sidetone HPF Switch", WM8994_SIDETONE, 6, 1, 0),
SOC_ENUM("AIF1ADC1 HPF Mode", aif1adc1_hpf),
SOC_DOUBLE("AIF1ADC1 HPF Switch", WM8994_AIF1_ADC1_FILTERS, 12, 11, 1, 0),
-SOC_ENUM("AIF1ADC2 HPF Mode", aif1adc2_hpf),
-SOC_DOUBLE("AIF1ADC2 HPF Switch", WM8994_AIF1_ADC2_FILTERS, 12, 11, 1, 0),
-
SOC_ENUM("AIF2ADC HPF Mode", aif2adc_hpf),
SOC_DOUBLE("AIF2ADC HPF Switch", WM8994_AIF2_ADC_FILTERS, 12, 11, 1, 0),
@@ -637,6 +624,24 @@ SOC_SINGLE("AIF2DAC 3D Stereo Switch", WM8994_AIF2_DAC_FILTERS_2,
8, 1, 0),
};
+/* Controls not available on WM1811 */
+static const struct snd_kcontrol_new wm8994_snd_controls[] = {
+SOC_DOUBLE_R_TLV("AIF1ADC2 Volume", WM8994_AIF1_ADC2_LEFT_VOLUME,
+ WM8994_AIF1_ADC2_RIGHT_VOLUME,
+ 1, 119, 0, digital_tlv),
+SOC_DOUBLE_R_TLV("AIF1DAC2 Volume", WM8994_AIF1_DAC2_LEFT_VOLUME,
+ WM8994_AIF1_DAC2_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
+
+SOC_SINGLE("AIF1DAC2 EQ Switch", WM8994_AIF1_DAC2_EQ_GAINS_1, 0, 1, 0),
+
+WM8994_DRC_SWITCH("AIF1DAC2 DRC Switch", WM8994_AIF1_DRC2_1, 2),
+WM8994_DRC_SWITCH("AIF1ADC2L DRC Switch", WM8994_AIF1_DRC2_1, 1),
+WM8994_DRC_SWITCH("AIF1ADC2R DRC Switch", WM8994_AIF1_DRC2_1, 0),
+
+SOC_ENUM("AIF1ADC2 HPF Mode", aif1adc2_hpf),
+SOC_DOUBLE("AIF1ADC2 HPF Switch", WM8994_AIF1_ADC2_FILTERS, 12, 11, 1, 0),
+};
+
static const struct snd_kcontrol_new wm8994_eq_controls[] = {
SOC_SINGLE_TLV("AIF1DAC1 EQ1 Volume", WM8994_AIF1_DAC1_EQ_GAINS_1, 11, 31, 0,
eq_tlv),
@@ -4258,13 +4263,15 @@ static int wm8994_component_probe(struct snd_soc_component *component)
wm8994_handle_pdata(wm8994);
wm_hubs_add_analogue_controls(component);
- snd_soc_add_component_controls(component, wm8994_snd_controls,
- ARRAY_SIZE(wm8994_snd_controls));
+ snd_soc_add_component_controls(component, wm8994_common_snd_controls,
+ ARRAY_SIZE(wm8994_common_snd_controls));
snd_soc_dapm_new_controls(dapm, wm8994_dapm_widgets,
ARRAY_SIZE(wm8994_dapm_widgets));
switch (control->type) {
case WM8994:
+ snd_soc_add_component_controls(component, wm8994_snd_controls,
+ ARRAY_SIZE(wm8994_snd_controls));
snd_soc_dapm_new_controls(dapm, wm8994_specific_dapm_widgets,
ARRAY_SIZE(wm8994_specific_dapm_widgets));
if (control->revision < 4) {
@@ -4284,8 +4291,10 @@ static int wm8994_component_probe(struct snd_soc_component *component)
}
break;
case WM8958:
+ snd_soc_add_component_controls(component, wm8994_snd_controls,
+ ARRAY_SIZE(wm8994_snd_controls));
snd_soc_add_component_controls(component, wm8958_snd_controls,
- ARRAY_SIZE(wm8958_snd_controls));
+ ARRAY_SIZE(wm8958_snd_controls));
snd_soc_dapm_new_controls(dapm, wm8958_dapm_widgets,
ARRAY_SIZE(wm8958_dapm_widgets));
if (control->revision < 1) {
--
2.17.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
