The patch ASoC: ams-delta: Take control over audio mute GPIO pins has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.3 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 73681f4f1426847b421649c6aa6c2dc303acc7c8 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx> Date: Sat, 7 Sep 2019 13:16:50 +0200 Subject: [PATCH] ASoC: ams-delta: Take control over audio mute GPIO pins Since commit 1137ceee76ba ("ARM: OMAP1: ams-delta: Don't request unused GPIOs"), on-board audio has appeared muted. It has been discovered that believed to be unused GPIO pins "hookflash1" and "hookflash2" need to be set low for audible sound in handsfree and handset mode respectively. According to Amstrad E3 wiki, the purpose of both pins hasn't been clearly identified. Original Amstrad software used to produce a high pulse on them when the phone was taken off hook or recall was pressed. With the current findings, we can assume the pins provide a kind of audio mute function, separately for handset and handsfree operation modes. Commit 2afdb4c41d78 ("ARM: OMAP1: ams-delta: Fix audio permanently muted") attempted to fix the issue temporarily by hogging the GPIO pin "hookflash1" renamed to "audio_mute", however the fix occurred incomplete as it restored audible sound only for handsfree mode. Stop hogging that pin, rename the pins to "handsfree_mute" and "handset_mute" respectively and implement appropriate DAPM event callbacks for "Speaker" and "Earpiece" DAPM widgets. Fixes: 1137ceee76ba ("ARM: OMAP1: ams-delta: Don't request unused GPIOs") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> Link: https://lore.kernel.org/r/20190907111650.15440-1-jmkrzyszt@xxxxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- arch/arm/mach-omap1/board-ams-delta.c | 10 +++++---- sound/soc/ti/ams-delta.c | 31 +++++++++++++++++++++++++-- 2 files changed, 35 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 36498ea1b2f3..c2affc727967 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -245,8 +245,8 @@ static struct platform_device latch2_gpio_device = { #define LATCH2_PIN_SCARD_CMDVCC 11 #define LATCH2_PIN_MODEM_NRESET 12 #define LATCH2_PIN_MODEM_CODEC 13 -#define LATCH2_PIN_AUDIO_MUTE 14 -#define LATCH2_PIN_HOOKFLASH 15 +#define LATCH2_PIN_HANDSFREE_MUTE 14 +#define LATCH2_PIN_HANDSET_MUTE 15 static struct regulator_consumer_supply modem_nreset_consumers[] = { REGULATOR_SUPPLY("RESET#", "serial8250.1"), @@ -475,6 +475,10 @@ static struct gpiod_lookup_table ams_delta_audio_gpio_table = { "hook_switch", 0), GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_MODEM_CODEC, "modem_codec", 0), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_HANDSFREE_MUTE, + "handsfree_mute", 0), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_HANDSET_MUTE, + "handset_mute", 0), { }, }, }; @@ -589,8 +593,6 @@ static int gpiochip_match_by_label(struct gpio_chip *chip, void *data) static struct gpiod_hog ams_delta_gpio_hogs[] = { GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout", GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW), - GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_AUDIO_MUTE, "audio_mute", - GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW), {}, }; diff --git a/sound/soc/ti/ams-delta.c b/sound/soc/ti/ams-delta.c index dee8fc70a64f..8e2fb81ad05c 100644 --- a/sound/soc/ti/ams-delta.c +++ b/sound/soc/ti/ams-delta.c @@ -23,14 +23,31 @@ #include "omap-mcbsp.h" #include "../codecs/cx20442.h" +static struct gpio_desc *handset_mute; +static struct gpio_desc *handsfree_mute; + +static int ams_delta_event_handset(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) +{ + gpiod_set_value_cansleep(handset_mute, !SND_SOC_DAPM_EVENT_ON(event)); + return 0; +} + +static int ams_delta_event_handsfree(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) +{ + gpiod_set_value_cansleep(handsfree_mute, !SND_SOC_DAPM_EVENT_ON(event)); + return 0; +} + /* Board specific DAPM widgets */ static const struct snd_soc_dapm_widget ams_delta_dapm_widgets[] = { /* Handset */ SND_SOC_DAPM_MIC("Mouthpiece", NULL), - SND_SOC_DAPM_HP("Earpiece", NULL), + SND_SOC_DAPM_HP("Earpiece", ams_delta_event_handset), /* Handsfree/Speakerphone */ SND_SOC_DAPM_MIC("Microphone", NULL), - SND_SOC_DAPM_SPK("Speaker", NULL), + SND_SOC_DAPM_SPK("Speaker", ams_delta_event_handsfree), }; /* How they are connected to codec pins */ @@ -542,6 +559,16 @@ static int ams_delta_probe(struct platform_device *pdev) card->dev = &pdev->dev; + handset_mute = devm_gpiod_get(card->dev, "handset_mute", + GPIOD_OUT_HIGH); + if (IS_ERR(handset_mute)) + return PTR_ERR(handset_mute); + + handsfree_mute = devm_gpiod_get(card->dev, "handsfree_mute", + GPIOD_OUT_HIGH); + if (IS_ERR(handsfree_mute)) + return PTR_ERR(handsfree_mute); + ret = snd_soc_register_card(card); if (ret) { dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret); -- 2.20.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
