The patch SoC: simple-card-utils: set 0Hz to sysclk when shutdown has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.4 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 2458adb8f92ad4d07ef7ab27c5bafa1d3f4678d6 Mon Sep 17 00:00:00 2001 From: Katsuhiro Suzuki <katsuhiro@xxxxxxxxxxxxx> Date: Sun, 8 Sep 2019 02:45:01 +0900 Subject: [PATCH] SoC: simple-card-utils: set 0Hz to sysclk when shutdown This patch set 0Hz to sysclk when shutdown the card. Some codecs set rate constraints that derives from sysclk. This mechanism works correctly if machine drivers give fixed frequency. But simple-audio and audio-graph card set variable clock rate if 'mclk-fs' property exists. In this case, rate constraints will go bad scenario. For example a codec accepts three limited rates (mclk / 256, mclk / 384, mclk / 512). Bad scenario as follows (mclk-fs = 256): - Initialize sysclk by correct value (Ex. 12.288MHz) - Codec set constraints of PCM rate by sysclk 48kHz (1/256), 32kHz (1/384), 24kHz (1/512) - Play 48kHz sound, it's acceptable - Sysclk is not changed - Play 32kHz sound, it's acceptable - Set sysclk to 8.192MHz (= fs * mclk-fs = 32k * 256) - Codec set constraints of PCM rate by sysclk 32kHz (1/256), 21.33kHz (1/384), 16kHz (1/512) - Play 48kHz again, but it's NOT acceptable because constraints do not allow 48kHz So codecs treat 0Hz sysclk as signal of applying no constraints to avoid this problem. Signed-off-by: Katsuhiro Suzuki <katsuhiro@xxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20190907174501.19833-1-katsuhiro@xxxxxxxxxxxxx Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- sound/soc/generic/simple-card-utils.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c index 556b1a789629..9b794775df53 100644 --- a/sound/soc/generic/simple-card-utils.c +++ b/sound/soc/generic/simple-card-utils.c @@ -213,10 +213,17 @@ EXPORT_SYMBOL_GPL(asoc_simple_startup); void asoc_simple_shutdown(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; struct asoc_simple_priv *priv = snd_soc_card_get_drvdata(rtd->card); struct simple_dai_props *dai_props = simple_priv_to_props(priv, rtd->num); + if (dai_props->mclk_fs) { + snd_soc_dai_set_sysclk(codec_dai, 0, 0, SND_SOC_CLOCK_IN); + snd_soc_dai_set_sysclk(cpu_dai, 0, 0, SND_SOC_CLOCK_OUT); + } + asoc_simple_clk_disable(dai_props->cpu_dai); asoc_simple_clk_disable(dai_props->codec_dai); -- 2.20.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
