On Fri, Aug 30, 2019 at 11:09:00PM +0300, Daniel Baluta wrote:
> From: Mihai Serban <mihai.serban@xxxxxxx>
>
> EDMA requires the period size to be multiple of maxburst. Otherwise the
> remaining bytes are not transferred and thus noise is produced.
>
> We can handle this issue by adding a constraint on
> SNDRV_PCM_HW_PARAM_PERIOD_SIZE to be multiple of tx/rx maxburst value.
>
> Cc: NXP Linux Team <linux-imx@xxxxxxx>
> Signed-off-by: Mihai Serban <mihai.serban@xxxxxxx>
> Signed-off-by: Daniel Baluta <daniel.baluta@xxxxxxx>
> ---
> sound/soc/fsl/fsl_sai.c | 15 +++++++++++++++
> sound/soc/fsl/fsl_sai.h | 1 +
> 2 files changed, 16 insertions(+)
>
> diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
> index 728307acab90..fe126029f4e3 100644
> --- a/sound/soc/fsl/fsl_sai.c
> +++ b/sound/soc/fsl/fsl_sai.c
> @@ -612,6 +612,16 @@ static int fsl_sai_startup(struct snd_pcm_substream *substream,
> FSL_SAI_CR3_TRCE_MASK,
> FSL_SAI_CR3_TRCE);
>
> + /*
> + * some DMA controllers need period size to be a multiple of
> + * tx/rx maxburst
> + */
> + if (sai->soc_data->use_constraint_period_size)
> + snd_pcm_hw_constraint_step(substream->runtime, 0,
> + SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
> + tx ? sai->dma_params_tx.maxburst :
> + sai->dma_params_rx.maxburst);
I feel that PERIOD_SIZE could be used for some other cases than
being related to maxburst....
> static const struct of_device_id fsl_sai_ids[] = {
> diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
> index b89b0ca26053..3a3f6f8e5595 100644
> --- a/sound/soc/fsl/fsl_sai.h
> +++ b/sound/soc/fsl/fsl_sai.h
> @@ -157,6 +157,7 @@
>
> struct fsl_sai_soc_data {
> bool use_imx_pcm;
> + bool use_constraint_period_size;
....so maybe the soc specific flag here could be something like
bool use_edma;
What do you think?
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
