On Wed, Sep 4, 2019 at 5:28 PM Neil Armstrong <narmstrong@xxxxxxxxxxxx> wrote:
>
> Hi,
>
> On 04/09/2019 11:09, Cheng-yi Chiang wrote:
> > Hi,
> >
> > On Tue, Sep 3, 2019 at 5:53 PM Neil Armstrong <narmstrong@xxxxxxxxxxxx> wrote:
> >>
> >> Hi,
> >>
> >> On 03/09/2019 07:51, Cheng-Yi Chiang wrote:
> >>> From: Yakir Yang <ykk@xxxxxxxxxxxxxx>
> >>>
> >>> When transmitting IEC60985 linear PCM audio, we configure the
> >>> Audio Sample Channel Status information of all the channel
> >>> status bits in the IEC60958 frame.
> >>> Refer to 60958-3 page 10 for frequency, original frequency, and
> >>> wordlength setting.
> >>>
> >>> This fix the issue that audio does not come out on some monitors
> >>> (e.g. LG 22CV241)
> >>>
> >>> Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
> >>> Signed-off-by: Cheng-Yi Chiang <cychiang@xxxxxxxxxxxx>
> >>> ---
> >>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 59 +++++++++++++++++++++++
> >>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.h | 20 ++++++++
> >>> 2 files changed, 79 insertions(+)
> >>>
> >>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> >>> index bd65d0479683..34d46e25d610 100644
> >>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> >>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> >>> @@ -582,6 +582,63 @@ static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk)
> >>> return n;
> >>> }
> >>>
> >>> +static void hdmi_set_schnl(struct dw_hdmi *hdmi)
> >>> +{
> >>> + u8 aud_schnl_samplerate;
> >>> + u8 aud_schnl_8;
> >>> +
> >>> + /* These registers are on RK3288 using version 2.0a. */
> >>> + if (hdmi->version != 0x200a)
> >>> + return;
> >>
> >> Are these limited to the 2.0a version *in* RK3288, or 2.0a version on all
> >> SoCs ?
> >>
> >
> > In the original patch by Yakir,
> >
> > https://lore.kernel.org/patchwork/patch/539653/ (sorry, I should
> > have added this link in the "after the cut" note)
> >
> > The fix is limited to version 2.0.
> > Since I am only testing on RK3288 with 2.0a, I change the check to 2.0a only.
> > I can not test 2.0a version on other SoCs.
> > The databook I have at hand is 2.0a (not specific to RK3288) so I
> > think all 2.0a should have this register.
> >
> > As for other version like version 1.3 on iMX6, there is no such
> > register, as stated by Russell
> >
> > http://lkml.iu.edu/hypermail/linux/kernel/1501.3/06268.html.
>
> Russell assumes the registers are not present on the iMX6 IP not having
> the I2S registers, but they are present on the IPs configured with I2S
> at any versions.
I see. Thanks for the check.
>
> My databook version (1.40.a) specifies :
>
> fc_audschnls0 to fc_audschnls8
>
> ```
> When transmitting IEC60958 linear PCM audio, this registers allow to configure the channel status
> information of all the channel status bits in the IEC60958 frame. For the moment this configuration is only
> used when the I2S audio interface, General Purpose Audio (GPA), or AHB audio DMA (AHBAUDDMA)
> interface is active (for S/PDIF interface this information comes from the stream).
> ```
>
> But the databook Revision History shows these registers were present since version 1.10a.
>
> I propose you remove the version check, but you only setup these registers when I2S is enabled:
> (hdmi_readb(hdmi, HDMI_CONFIG0_ID) & HDMI_CONFIG0_I2S) until a AHBAUDDMA user needs this,
> with a small comment explaining the situation.
I see. Sound like a good plan.
In sum, I will add
set_channel_status()
in dw_hdmi.c
And in the beginning of this function,
check it is using I2S
(hdmi_readb(hdmi, HDMI_CONFIG0_ID) & HDMI_CONFIG0_I2S)
with a comment explaining the situation.
And let dw-hdmi-audio-i2s dw_hdmi_i2s_hw_params() to call this
function after dw_hdmi_set_sample_rate, with word length (or
sample_bit) passed it as argument.
I have not tested setting this register here as in the original patch
it was set in hdmi_set_clk_regenerator.
I will test it and update in my v2.
Thanks again to everyone for the prompt reply and help.
>
> Neil
>
> >
> > So at least we should check the version.
> > Maybe we can set the criteria as version 2.0 or above to make it a safe patch ?
> > If there is the same need on other SoC with version < 2.0, it can be
> > added later.
> > Presumably, there will be databook of that version to help confirming
> > this setting.
> >
> > Thanks!
> >>> +
> >>> + switch (hdmi->sample_rate) {
> >>> + case 32000:
> >>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_32K;
> >>> + break;
> >>> + case 44100:
> >>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_44K1;
> >>> + break;
> >>> + case 48000:
> >>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_48K;
> >>> + break;
> >>> + case 88200:
> >>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_88K2;
> >>> + break;
> >>> + case 96000:
> >>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_96K;
> >>> + break;
> >>> + case 176400:
> >>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_176K4;
> >>> + break;
> >>> + case 192000:
> >>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_192K;
> >>> + break;
> >>> + case 768000:
> >>> + aud_schnl_samplerate = HDMI_FC_AUDSCHNLS7_SMPRATE_768K;
> >>> + break;
> >>> + default:
> >>> + dev_warn(hdmi->dev, "Unsupported audio sample rate (%u)\n",
> >>> + hdmi->sample_rate);
> >>> + return;
> >>> + }
> >>> +
> >>> + /* set channel status register */
> >>> + hdmi_modb(hdmi, aud_schnl_samplerate, HDMI_FC_AUDSCHNLS7_SMPRATE_MASK,
> >>> + HDMI_FC_AUDSCHNLS7);
> >>> +
> >>> + /*
> >>> + * Set original frequency to be the same as frequency.
> >>> + * Use one-complement value as stated in IEC60958-3 page 13.
> >>> + */
> >>> + aud_schnl_8 = (~aud_schnl_samplerate) <<
> >>> + HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_OFFSET;
> >>> +
> >>> + /* This means word length is 16 bit. Refer to IEC60958-3 page 12. */
> >>> + aud_schnl_8 |= 2 << HDMI_FC_AUDSCHNLS8_WORDLEGNTH_OFFSET;
> >>> +
> >>> + hdmi_writeb(hdmi, aud_schnl_8, HDMI_FC_AUDSCHNLS8);
> >>> +}
> >>> +
> >>> static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
> >>> unsigned long pixel_clk, unsigned int sample_rate)
> >>> {
> >>> @@ -620,6 +677,8 @@ static void hdmi_set_clk_regenerator(struct dw_hdmi *hdmi,
> >>> hdmi->audio_cts = cts;
> >>> hdmi_set_cts_n(hdmi, cts, hdmi->audio_enable ? n : 0);
> >>> spin_unlock_irq(&hdmi->audio_lock);
> >>> +
> >>> + hdmi_set_schnl(hdmi);
> >>> }
> >>>
> >>> static void hdmi_init_clk_regenerator(struct dw_hdmi *hdmi)
> >>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> >>> index 6988f12d89d9..619ebc1c8354 100644
> >>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> >>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
> >>> @@ -158,6 +158,17 @@
> >>> #define HDMI_FC_SPDDEVICEINF 0x1062
> >>> #define HDMI_FC_AUDSCONF 0x1063
> >>> #define HDMI_FC_AUDSSTAT 0x1064
> >>> +#define HDMI_FC_AUDSV 0x1065
> >>> +#define HDMI_FC_AUDSU 0x1066
> >>> +#define HDMI_FC_AUDSCHNLS0 0x1067
> >>> +#define HDMI_FC_AUDSCHNLS1 0x1068
> >>> +#define HDMI_FC_AUDSCHNLS2 0x1069
> >>> +#define HDMI_FC_AUDSCHNLS3 0x106a
> >>> +#define HDMI_FC_AUDSCHNLS4 0x106b
> >>> +#define HDMI_FC_AUDSCHNLS5 0x106c
> >>> +#define HDMI_FC_AUDSCHNLS6 0x106d
> >>> +#define HDMI_FC_AUDSCHNLS7 0x106e
> >>> +#define HDMI_FC_AUDSCHNLS8 0x106f
> >>> #define HDMI_FC_DATACH0FILL 0x1070
> >>> #define HDMI_FC_DATACH1FILL 0x1071
> >>> #define HDMI_FC_DATACH2FILL 0x1072
> >>> @@ -706,6 +717,15 @@ enum {
> >>> /* HDMI_FC_AUDSCHNLS7 field values */
> >>> HDMI_FC_AUDSCHNLS7_ACCURACY_OFFSET = 4,
> >>> HDMI_FC_AUDSCHNLS7_ACCURACY_MASK = 0x30,
> >>> + HDMI_FC_AUDSCHNLS7_SMPRATE_MASK = 0x0f,
> >>> + HDMI_FC_AUDSCHNLS7_SMPRATE_192K = 0xe,
> >>> + HDMI_FC_AUDSCHNLS7_SMPRATE_176K4 = 0xc,
> >>> + HDMI_FC_AUDSCHNLS7_SMPRATE_96K = 0xa,
> >>> + HDMI_FC_AUDSCHNLS7_SMPRATE_768K = 0x9,
> >>> + HDMI_FC_AUDSCHNLS7_SMPRATE_88K2 = 0x8,
> >>> + HDMI_FC_AUDSCHNLS7_SMPRATE_32K = 0x3,
> >>> + HDMI_FC_AUDSCHNLS7_SMPRATE_48K = 0x2,
> >>> + HDMI_FC_AUDSCHNLS7_SMPRATE_44K1 = 0x0,
> >>>
> >>> /* HDMI_FC_AUDSCHNLS8 field values */
> >>> HDMI_FC_AUDSCHNLS8_ORIGSAMPFREQ_MASK = 0xf0,
> >>>
> >>
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
