On Wed, Sep 04, 2019 at 01:53:19AM +0900, Katsuhiro Suzuki wrote:
> Root cause of this strange behavior is changing constraints list at
> set_sysclk timing. It seems that is too early to determine. So this
> patch does not use constraints list and check PCM rate limit more
> later timing at hw_params.
hw_params is a bit late to impose constraints, you want them to be
available to be available to the application before it gets as far as
picking the parameters it wants so that you don't get hw_params failing
due to an invalid configuration. That makes everything run more
smoothly, applications should be able to trust the constraints they got
and some will not handle failures well.
The way this works with the variable MCLKs is that you end up in one of
two cases (wm8731 and wm8741 do this):
1. The system is idle, MCLK is set to 0. In this case no constraints
are set and we just set MCLK to whatever is required in hw_params()
in the machine driver.
2. One direction is active, MCLK is set to whatever that needed. In
this case startup() sets constraints derived from the MCLK.
There are races in this if streams are being started and torn down
simultaneously, there's not much we can do about them with the API the
way it is so we do have to validate in hw_params() anyway but it should
be validation not constraint imposition.
If the system has a fixed MCLK it just sets that on probe then we always
get the constraints applied on startup through the same code that
handles case 2.
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
