On 02/09/2019 12:32, Jonas Karlman wrote:
> On 2019-09-02 11:42, Neil Armstrong wrote:
>> Hi,
>>
>> On 02/09/2019 05:54, Cheng-Yi Chiang wrote:
>>> In the designware databook, the sequence of enabling audio clock and
>>> setting format is not clearly specified.
>>> Currently, audio clock is enabled in the end of hw_param ops after
>>> setting format.
>>>
>>> On some monitors, there is a possibility that audio does not come out.
>>> Fix this by enabling audio clock in audio_startup ops
>>> before hw_param ops setting format.
>>>
>>> Signed-off-by: Cheng-Yi Chiang <cychiang@xxxxxxxxxxxx>
>>> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
>>> Reviewed-by: Jonas Karlman <jonas@xxxxxxxxx>
>>> Tested-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
>>> ---
>>> Changes from v1:
>>> 1. Move audio_startup to the front of audio_shutdown.
>>> 2. Fix the indentation of audio_startup equal sign using tab.
>>> 3. Rebase the patch on linux-next/master.
>>> 4. Add Reviewed-by and Tested-by fields from dianders@xxxxxxxxxxxx.
>>> 5. Add Reviewed-by field from jonas@xxxxxxxxx.
>>>
>>> drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 +++++++++
>>> 1 file changed, 9 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
>>> index 1d15cf9b6821..34d8e837555f 100644
>>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
>>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
>>> @@ -109,6 +109,14 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
>>> hdmi_write(audio, conf0, HDMI_AUD_CONF0);
>>> hdmi_write(audio, conf1, HDMI_AUD_CONF1);
>>>
>>> + return 0;
>>> +}
>>> +
>>> +static int dw_hdmi_i2s_audio_startup(struct device *dev, void *data)
>>> +{
>>> + struct dw_hdmi_i2s_audio_data *audio = data;
>>> + struct dw_hdmi *hdmi = audio->hdmi;
>>> +
>>> dw_hdmi_audio_enable(hdmi);
>>>
>>> return 0;
>>> @@ -153,6 +161,7 @@ static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
>>>
>>> static struct hdmi_codec_ops dw_hdmi_i2s_ops = {
>>> .hw_params = dw_hdmi_i2s_hw_params,
>>> + .audio_startup = dw_hdmi_i2s_audio_startup,
>>> .audio_shutdown = dw_hdmi_i2s_audio_shutdown,
>>> .get_eld = dw_hdmi_i2s_get_eld,
>>> .get_dai_id = dw_hdmi_i2s_get_dai_id,
>>>
>> Looks sane, Jonas should I apply it now it's rebased ?
>
> Sure, looks sane and compiles without warnings on my build host.
Thx, Applied to drm-misc-next
Neil
>
> Regards,
> Jonas
>
>>
>> Neil
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
