Hi Takashi,
On 02-09-19 09:07, Takashi Iwai wrote:
On Sat, 31 Aug 2019 16:58:41 +0200,
Hans de Goede wrote:
Add an UCM profile for Intel boards with a RT5672 codec.
Re-use the existing platform enable and disable sequences for BYT/CHT SST
support and add a codecs/rt5672 dir with codec specific enable / disable
sequences for the various inputs and outputs.
This is partly based on earlier work done here:
https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
We've recently set up a new alsa-ucm-conf repo for keeping UCM
profiles outside alsa-lib repo. The new repo has a different license
(BSD3-Clause) for easily adapting to OSes with license restriction.
I guess we should put the stuff there from now on, as much as
possible? The handling of UCM profile is currently pending, and we
need to decide the general policy, as well as how to transfer the
existing profiles to the new repo...
I think it is good that we now have a separate repo and I'm fine
with re-licensing all my UCM profile work under a BSD3-Clause license.
But I believe that until we have actually figured out how this is
all going to work and we are actually doing releases from the
new alsa-ucm-conf repo, we should keep adding new profiles to
alsa-lib for now, because these profiles are necessary for things
to work OOTB for our end users.
Regards,
Hans
---
configure.ac | 2 +
src/conf/ucm/Makefile.am | 1 +
src/conf/ucm/cht-bsw-rt5672/HiFi.conf | 27 +++++++++++
src/conf/ucm/cht-bsw-rt5672/Makefile.am | 4 ++
.../ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf | 6 +++
src/conf/ucm/codecs/Makefile.am | 1 +
src/conf/ucm/codecs/rt5672/DMIC1.conf | 28 +++++++++++
src/conf/ucm/codecs/rt5672/DMIC2.conf | 28 +++++++++++
src/conf/ucm/codecs/rt5672/EnableSeq.conf | 48 +++++++++++++++++++
src/conf/ucm/codecs/rt5672/HeadPhones.conf | 23 +++++++++
src/conf/ucm/codecs/rt5672/HeadsetMic.conf | 38 +++++++++++++++
src/conf/ucm/codecs/rt5672/Makefile.am | 5 ++
src/conf/ucm/codecs/rt5672/MonoSpeaker.conf | 26 ++++++++++
src/conf/ucm/codecs/rt5672/Speaker.conf | 22 +++++++++
14 files changed, 259 insertions(+)
create mode 100644 src/conf/ucm/cht-bsw-rt5672/HiFi.conf
create mode 100644 src/conf/ucm/cht-bsw-rt5672/Makefile.am
create mode 100644 src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf
create mode 100644 src/conf/ucm/codecs/rt5672/DMIC1.conf
create mode 100644 src/conf/ucm/codecs/rt5672/DMIC2.conf
create mode 100644 src/conf/ucm/codecs/rt5672/EnableSeq.conf
create mode 100644 src/conf/ucm/codecs/rt5672/HeadPhones.conf
create mode 100644 src/conf/ucm/codecs/rt5672/HeadsetMic.conf
create mode 100644 src/conf/ucm/codecs/rt5672/Makefile.am
create mode 100644 src/conf/ucm/codecs/rt5672/MonoSpeaker.conf
create mode 100644 src/conf/ucm/codecs/rt5672/Speaker.conf
diff --git a/configure.ac b/configure.ac
index 2e955760..9ccca7aa 100644
--- a/configure.ac
+++ b/configure.ac
@@ -741,6 +741,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \
src/conf/ucm/bytcr-rt5651-stereo-spk-in1-mic/Makefile \
src/conf/ucm/bytcr-rt5651-stereo-spk-in2-mic/Makefile \
src/conf/ucm/bytcr-rt5651-stereo-spk-in12-mic/Makefile \
+ src/conf/ucm/cht-bsw-rt5672/Makefile \
src/conf/ucm/chtnau8824/Makefile \
src/conf/ucm/chtrt5645/Makefile \
src/conf/ucm/chtrt5645-mono-speaker-analog-mic/Makefile \
@@ -772,6 +773,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \
src/conf/ucm/codecs/rt5640/Makefile \
src/conf/ucm/codecs/rt5645/Makefile \
src/conf/ucm/codecs/rt5651/Makefile \
+ src/conf/ucm/codecs/rt5672/Makefile \
src/conf/ucm/platforms/Makefile \
src/conf/ucm/platforms/bytcr/Makefile \
src/conf/topology/Makefile \
diff --git a/src/conf/ucm/Makefile.am b/src/conf/ucm/Makefile.am
index 02257048..2ed4e1a3 100644
--- a/src/conf/ucm/Makefile.am
+++ b/src/conf/ucm/Makefile.am
@@ -25,6 +25,7 @@ bytcr-rt5651-stereo-spk-dmic-mic \
bytcr-rt5651-stereo-spk-in1-mic \
bytcr-rt5651-stereo-spk-in2-mic \
bytcr-rt5651-stereo-spk-in12-mic \
+cht-bsw-rt5672 \
chtnau8824 \
chtrt5645 \
chtrt5645-mono-speaker-analog-mic \
diff --git a/src/conf/ucm/cht-bsw-rt5672/HiFi.conf b/src/conf/ucm/cht-bsw-rt5672/HiFi.conf
new file mode 100644
index 00000000..b83099d8
--- /dev/null
+++ b/src/conf/ucm/cht-bsw-rt5672/HiFi.conf
@@ -0,0 +1,27 @@
+# Adapted from https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
+
+SectionVerb {
+ EnableSequence [
+ cdev "hw:chtbswrt5672"
+ <platforms/bytcr/PlatformEnableSeq.conf>
+ <codecs/rt5672/EnableSeq.conf>
+ ]
+
+ DisableSequence [
+ cdev "hw:chtbswrt5672"
+ <platforms/bytcr/PlatformDisableSeq.conf>
+ ]
+
+ Value {
+ PlaybackPCM "hw:chtbswrt5672"
+ CapturePCM "hw:chtbswrt5672"
+ }
+}
+
+<codecs/rt5672/Speaker.conf>
+<codecs/rt5672/MonoSpeaker.conf>
+<codecs/rt5672/HeadPhones.conf>
+
+<codecs/rt5672/DMIC1.conf>
+<codecs/rt5672/DMIC2.conf>
+<codecs/rt5672/HeadsetMic.conf>
diff --git a/src/conf/ucm/cht-bsw-rt5672/Makefile.am b/src/conf/ucm/cht-bsw-rt5672/Makefile.am
new file mode 100644
index 00000000..c3d557fa
--- /dev/null
+++ b/src/conf/ucm/cht-bsw-rt5672/Makefile.am
@@ -0,0 +1,4 @@
+alsaconfigdir = @ALSA_CONFIG_DIR@
+ucmdir = $(alsaconfigdir)/ucm/cht-bsw-rt5672
+ucm_DATA = cht-bsw-rt5672.conf HiFi.conf
+EXTRA_DIST = $(ucm_DATA)
diff --git a/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf b/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf
new file mode 100644
index 00000000..c79024d9
--- /dev/null
+++ b/src/conf/ucm/cht-bsw-rt5672/cht-bsw-rt5672.conf
@@ -0,0 +1,6 @@
+# Adapted from https://github.com/plbossart/UCM/tree/master/cht-bsw-rt5672
+
+SectionUseCase."HiFi" {
+ File "HiFi.conf"
+ Comment "Play HiFi quality Music"
+}
diff --git a/src/conf/ucm/codecs/Makefile.am b/src/conf/ucm/codecs/Makefile.am
index 5987b9cf..17c4ebf9 100644
--- a/src/conf/ucm/codecs/Makefile.am
+++ b/src/conf/ucm/codecs/Makefile.am
@@ -4,4 +4,5 @@ es8316 \
rt5640 \
rt5645 \
rt5651 \
+rt5672 \
nau8824
diff --git a/src/conf/ucm/codecs/rt5672/DMIC1.conf b/src/conf/ucm/codecs/rt5672/DMIC1.conf
new file mode 100644
index 00000000..9a8db1a5
--- /dev/null
+++ b/src/conf/ucm/codecs/rt5672/DMIC1.conf
@@ -0,0 +1,28 @@
+SectionDevice."DigitalMic-DMIC1" {
+ Comment "Internal Digital Microphone on DMIC1"
+
+ ConflictingDevice [
+ "DigitalMic-DMIC2"
+ "HeadsetMic"
+ ]
+
+ EnableSequence [
+ cdev "hw:chtbswrt5672"
+ cset "name='Int Mic Switch' on"
+ cset "name='Stereo1 DMIC Mux' DMIC1"
+ cset "name='Stereo1 ADC 2 Mux' DMIC"
+ cset "name='Sto1 ADC MIXL ADC2 Switch' on"
+ cset "name='Sto1 ADC MIXR ADC2 Switch' on"
+ ]
+
+ DisableSequence [
+ cdev "hw:chtbswrt5672"
+ cset "name='Int Mic Switch' off"
+ cset "name='Sto1 ADC MIXL ADC2 Switch' off"
+ cset "name='Sto1 ADC MIXR ADC2 Switch' off"
+ ]
+
+ Value {
+ CaptureChannels 2
+ }
+}
diff --git a/src/conf/ucm/codecs/rt5672/DMIC2.conf b/src/conf/ucm/codecs/rt5672/DMIC2.conf
new file mode 100644
index 00000000..b960436e
--- /dev/null
+++ b/src/conf/ucm/codecs/rt5672/DMIC2.conf
@@ -0,0 +1,28 @@
+SectionDevice."DigitalMic-DMIC2" {
+ Comment "Internal Digital Microphone on DMIC2"
+
+ ConflictingDevice [
+ "DigitalMic-DMIC1"
+ "HeadsetMic"
+ ]
+
+ EnableSequence [
+ cdev "hw:chtbswrt5672"
+ cset "name='Int Mic Switch' on"
+ cset "name='Stereo1 DMIC Mux' DMIC2"
+ cset "name='Stereo1 ADC 2 Mux' DMIC"
+ cset "name='Sto1 ADC MIXL ADC2 Switch' on"
+ cset "name='Sto1 ADC MIXR ADC2 Switch' on"
+ ]
+
+ DisableSequence [
+ cdev "hw:chtbswrt5672"
+ cset "name='Int Mic Switch' off"
+ cset "name='Sto1 ADC MIXL ADC2 Switch' off"
+ cset "name='Sto1 ADC MIXR ADC2 Switch' off"
+ ]
+
+ Value {
+ CaptureChannels 2
+ }
+}
diff --git a/src/conf/ucm/codecs/rt5672/EnableSeq.conf b/src/conf/ucm/codecs/rt5672/EnableSeq.conf
new file mode 100644
index 00000000..bd4f357c
--- /dev/null
+++ b/src/conf/ucm/codecs/rt5672/EnableSeq.conf
@@ -0,0 +1,48 @@
+# Playback (I2S1)
+
+# common
+cset "name='DAC1 L Mux' IF1 DAC"
+cset "name='DAC1 R Mux' IF1 DAC"
+cset "name='DAC1 MIXL DAC1 Switch' on"
+cset "name='DAC1 MIXR DAC1 Switch' on"
+cset "name='Stereo DAC MIXL DAC L1 Switch' on"
+cset "name='Stereo DAC MIXL DAC R1 Switch' off"
+cset "name='Stereo DAC MIXR DAC R1 Switch' on"
+cset "name='Stereo DAC MIXR DAC L1 Switch' off"
+
+# speaker
+cset "name='PDM1 L Mux' Stereo DAC"
+cset "name='PDM1 R Mux' Stereo DAC"
+
+# headphone
+cset "name='HPOVOL MIXL DAC1 Switch' on"
+cset "name='HPOVOL MIXR DAC1 Switch' on"
+cset "name='HPO MIX HPVOL Switch' on"
+
+# line out
+# cset "name='OUT MIXL DAC L1 Switch' on"
+# cset "name='OUT MIXR DAC R1 Switch' on"
+# cset "name='LOUT MIX OUTMIX L Switch' on"
+# cset "name='LOUT MIX OUTMIX R Switch' on"
+
+# 47=0dB, 0.375 dB/step
+cset "name='ADC Capture Volume' 47"
+cset "name='ADC Capture Switch' on"
+
+# Headset mic is quite soft, boost it a bit, 1 = 20dB which is the first
+# available boost step
+cset "name='IN1 Boost Volume' 1"
+
+# Start with all outputs / inputs disabled
+cset "name='Ext Spk Switch' off"
+cset "name='Headphone Switch' off"
+cset "name='Int Mic Switch' off"
+cset "name='Headset Mic Switch' off"
+cset "name='Sto1 ADC MIXL ADC1 Switch' off"
+cset "name='Sto1 ADC MIXR ADC1 Switch' off"
+cset "name='Sto1 ADC MIXL ADC2 Switch' off"
+cset "name='Sto1 ADC MIXR ADC2 Switch' off"
+cset "name='RECMIXL BST1 Switch' off"
+cset "name='RECMIXR BST1 Switch' off"
+cset "name='RECMIXL BST2 Switch' off"
+cset "name='RECMIXR BST2 Switch' off"
diff --git a/src/conf/ucm/codecs/rt5672/HeadPhones.conf b/src/conf/ucm/codecs/rt5672/HeadPhones.conf
new file mode 100644
index 00000000..cb8aad2d
--- /dev/null
+++ b/src/conf/ucm/codecs/rt5672/HeadPhones.conf
@@ -0,0 +1,23 @@
+SectionDevice."Headphones" {
+ Comment "Headphones"
+
+ ConflictingDevice [
+ "Speaker"
+ "MonoSpeaker"
+ ]
+
+ EnableSequence [
+ cdev "hw:chtbswrt5672"
+ cset "name='Headphone Switch' on"
+ ]
+
+ DisableSequence [
+ cdev "hw:chtbswrt5672"
+ cset "name='Headphone Switch' off"
+ ]
+
+ Value {
+ PlaybackChannels "2"
+ JackControl "Headphone Jack"
+ }
+}
diff --git a/src/conf/ucm/codecs/rt5672/HeadsetMic.conf b/src/conf/ucm/codecs/rt5672/HeadsetMic.conf
new file mode 100644
index 00000000..cc6d8d56
--- /dev/null
+++ b/src/conf/ucm/codecs/rt5672/HeadsetMic.conf
@@ -0,0 +1,38 @@
+SectionDevice."HeadsetMic" {
+ Comment "Headset Microphone"
+
+ ConflictingDevice [
+ "DigitalMic-DMIC1"
+ "DigitalMic-DMIC2"
+ ]
+
+ EnableSequence [
+ cdev "hw:chtbswrt5672"
+ cset "name='Headset Mic Switch' on"
+ cset "name='RECMIXL BST1 Switch' on"
+ cset "name='RECMIXR BST1 Switch' on"
+ cset "name='Sto1 ADC MIXL ADC1 Switch' on"
+ cset "name='Sto1 ADC MIXR ADC1 Switch' on"
+ # For unknown reasons the headset mic sound is only recorded
+ # on the left channel, we tweak the data-stream reception to
+ # use the left samples for both slots, so that we get a stereo
+ # stream with the mic sound on both channels
+ cset "name='codec_in rx deinterleaver codec_in0_1' 1"
+ ]
+
+ DisableSequence [
+ cdev "hw:chtbswrt5672"
+ cset "name='Headset Mic Switch' off"
+ cset "name='RECMIXL BST1 Switch' off"
+ cset "name='RECMIXR BST1 Switch' off"
+ cset "name='Sto1 ADC MIXL ADC1 Switch' off"
+ cset "name='Sto1 ADC MIXR ADC1 Switch' off"
+ # Undo data-stream reception mono-mix workaround
+ cset "name='codec_in rx deinterleaver codec_in0_1' 2"
+ ]
+
+ Value {
+ CaptureChannels "2"
+ JackControl "Headset Mic Jack"
+ }
+}
diff --git a/src/conf/ucm/codecs/rt5672/Makefile.am b/src/conf/ucm/codecs/rt5672/Makefile.am
new file mode 100644
index 00000000..feba0b76
--- /dev/null
+++ b/src/conf/ucm/codecs/rt5672/Makefile.am
@@ -0,0 +1,5 @@
+alsaconfigdir = @ALSA_CONFIG_DIR@
+ucmdir = $(alsaconfigdir)/ucm/codecs/rt5672
+ucm_DATA = DMIC1.conf DMIC2.conf EnableSeq.conf HeadPhones.conf \
+ HeadsetMic.conf MonoSpeaker.conf Speaker.conf
+EXTRA_DIST = $(ucm_DATA)
diff --git a/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf b/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf
new file mode 100644
index 00000000..828a1154
--- /dev/null
+++ b/src/conf/ucm/codecs/rt5672/MonoSpeaker.conf
@@ -0,0 +1,26 @@
+SectionDevice."MonoSpeaker" {
+ Comment "Mono Speaker"
+
+ ConflictingDevice [
+ "Speaker"
+ "Headphones"
+ ]
+
+ EnableSequence [
+ cdev "hw:chtbswrt5672"
+ cset "name='Stereo DAC MIXR DAC R1 Switch' off"
+ cset "name='Stereo DAC MIXL DAC R1 Switch' on"
+ cset "name='Ext Spk Switch' on"
+ ]
+
+ DisableSequence [
+ cdev "hw:chtbswrt5672"
+ cset "name='Ext Spk Switch' off"
+ cset "name='Stereo DAC MIXL DAC R1 Switch' off"
+ cset "name='Stereo DAC MIXR DAC R1 Switch' on"
+ ]
+
+ Value {
+ PlaybackChannels "2"
+ }
+}
diff --git a/src/conf/ucm/codecs/rt5672/Speaker.conf b/src/conf/ucm/codecs/rt5672/Speaker.conf
new file mode 100644
index 00000000..f9291e53
--- /dev/null
+++ b/src/conf/ucm/codecs/rt5672/Speaker.conf
@@ -0,0 +1,22 @@
+SectionDevice."Speaker" {
+ Comment "Speakers"
+
+ ConflictingDevice [
+ "MonoSpeaker"
+ "Headphones"
+ ]
+
+ EnableSequence [
+ cdev "hw:chtbswrt5672"
+ cset "name='Ext Spk Switch' on"
+ ]
+
+ DisableSequence [
+ cdev "hw:chtbswrt5672"
+ cset "name='Ext Spk Switch' off"
+ ]
+
+ Value {
+ PlaybackChannels "2"
+ }
+}
--
2.23.0
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
