Hi,
On Wed, Aug 28, 2019 at 9:30 PM Cheng-Yi Chiang <cychiang@xxxxxxxxxxxx> wrote:
>
> In the designware databook, the sequence of enabling audio clock and
> setting format is not clearly specified.
> Currently, audio clock is enabled in the end of hw_param ops after
> setting format.
>
> On some monitors, there is a possibility that audio does not come out.
> Fix this by enabling audio clock in audio_startup ops
> before hw_param ops setting format.
>
> Signed-off-by: Cheng-Yi Chiang <cychiang@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> index 5cbb71a866d5..08b4adbb1ddc 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> @@ -69,6 +69,14 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
> hdmi_write(audio, conf0, HDMI_AUD_CONF0);
> hdmi_write(audio, conf1, HDMI_AUD_CONF1);
>
> + return 0;
> +}
> +
> +static int dw_hdmi_i2s_audio_startup(struct device *dev, void *data)
> +{
> + struct dw_hdmi_i2s_audio_data *audio = data;
> + struct dw_hdmi *hdmi = audio->hdmi;
> +
> dw_hdmi_audio_enable(hdmi);
>
> return 0;
> @@ -105,6 +113,7 @@ static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
> }
>
> static struct hdmi_codec_ops dw_hdmi_i2s_ops = {
> + .audio_startup = dw_hdmi_i2s_audio_startup,
> .hw_params = dw_hdmi_i2s_hw_params,
> .audio_shutdown = dw_hdmi_i2s_audio_shutdown,
> .get_dai_id = dw_hdmi_i2s_get_dai_id,
> --
I am no expert on audio stuff, but this seems sane to me. If you
happened to spin it for another reason, it might seem slightly nicer
to put the setting of ".audio_startup" adjacent to the setting of
".audio_shutdown" in the struct.
I have tested your patch on Chrome OS 4.19 and it definitely fixes the
problems I saw. Chrome OS 4.19 is a little different than upstream
and I'm not setup to test HDMI audio directly on upstream, but I did
at least confirm that my problem _wasn't_ magically fixed by any of
these patches that I found upstream (I picked them into my tree and
still saw the problem):
fc1ca6e01d0a drm/bridge: dw-hdmi-i2s: add .get_eld support
43e88f670a5e drm/bridge: dw-hdmi-i2s: enable only the required i2s lanes
46cecde310bb drm/bridge: dw-hdmi-i2s: reset audio fifo before applying
new params
0c6098859176 drm/bridge: dw-hdmi-i2s: set the channel allocation
17a1e555b608 drm/bridge: dw-hdmi-i2s: enable lpcm multi channels
da5f5bc92f49 drm/bridge: dw-hdmi: set channel count in the infoframes
2a2a3d2ff799 drm/bridge: dw-hdmi: move audio channel setup out of ahb
8067f62bccaf drm/bridge: dw-hdmi-i2s: support more i2s format
Thus:
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Tested-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
-Doug
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
