On Thu, Aug 29, 2019 at 10:52 AM Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> wrote: > > Thanks for the review! > > On 29/08/2019 16:46, Rob Herring wrote: > > On Thu, Aug 29, 2019 at 9:45 AM Srinivas Kandagatla > > <srinivas.kandagatla@xxxxxxxxxx> wrote: > >> > >> This patch adds bindings for WSA8810/WSA8815 Class-D Smart Speaker > >> Amplifier. This Amplifier also has a simple thermal sensor for > >> over temperature and speaker protection. > >> > >> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> > >> --- > >> .../bindings/sound/qcom,wsa881x.yaml | 41 +++++++++++++++++++ > >> 1 file changed, 41 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml > >> > >> diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml > >> new file mode 100644 > >> index 000000000000..7a486c024732 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml > >> @@ -0,0 +1,41 @@ > >> +# SPDX-License-Identifier: GPL-2.0 > > > > Dual license please. > > > Will do that! > > >> +%YAML 1.2 > >> +--- > >> +$id: http://devicetree.org/schemas/sound/qcom,wsa881x.yaml# > >> +$schema: http://devicetree.org/meta-schemas/core.yaml# > >> + > >> +title: Bindings for Qualcomm WSA8810/WSA8815 Class-D Smart Speaker Amplifier > >> + > >> +maintainers: > >> + - Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> > >> + > >> +description: | > >> + WSA8810 is a class-D smart speaker amplifier and WSA8815 > >> + is a high-output power class-D smart speaker amplifier. > >> + Their primary operating mode uses a SoundWire digital audio > >> + interface. This binding is for SoundWire interface. > >> + > >> +properties: > >> + compatible: > >> + const: "sdw10217201000" > > > > No need for quotes. > > Did not knew that! Still getting used to yaml stuff :-) > > > > >> + > >> + reg: > >> + maxItems: 1 > >> + > > > >> + powerdown-gpios: > >> + description: GPIO spec for Powerdown/Shutdown line to use > >> + maxItems: 1 > >> + > >> + '#thermal-sensor-cells': > >> + const: 0 > > > > Either of these required? > > > > "make dt_binding_check" was complaining when I added this! Let me retry it! Because the example in soundwire-controller.yaml will no longer be valid... :) _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
