On Tue, 27 Aug 2019 at 11:34, Maxime Ripard <mripard@xxxxxxxxxx> wrote: > > On Mon, Aug 26, 2019 at 08:07:33PM +0200, codekipper@xxxxxxxxx wrote: > > From: Marcus Cooper <codekipper@xxxxxxxxx> > > > > On the newer SoCs such as the H3 and A64 this is set by default > > to transfer a 0 after each sample in each slot. However the A10 > > and A20 SoCs that this driver was developed on had a default > > setting where it padded the audio gain with zeros. > > > > This isn't a problem whilst we have only support for 16bit audio > > but with larger sample resolution rates in the pipeline then SEXT > > bits should be cleared so that they also pad at the LSB. Without > > this the audio gets distorted. > > > > Signed-off-by: Marcus Cooper <codekipper@xxxxxxxxx> > > If anything, I'd like to have less regmap_fields rather than more of > them. This is pretty easy to add to one of the callbacks, especially > since the field itself has been completely reworked from one > generation to the other. > ACK That's fine....I've been doing that with the patches which follow this. CK > Maxime > > -- > Maxime Ripard, Bootlin > Embedded Linux and Kernel engineering > https://bootlin.com _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
