[PATCH 2/2] ASoC: rt1011: ADCDAT pin config modification

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Shuming Fan <shumingf@xxxxxxxxxxx>

ADCDAT pin config sets to output mode in default.
And the driver creates the kcontrol to control ADCDAT pin configuration.

Signed-off-by: Shuming Fan <shumingf@xxxxxxxxxxx>
---
 sound/soc/codecs/rt1011.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c
index f9235764ad32..52c17450d5a0 100644
--- a/sound/soc/codecs/rt1011.c
+++ b/sound/soc/codecs/rt1011.c
@@ -1029,6 +1029,14 @@ static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc1_1_enum,	RT1011_TDM1_SET_3, 6,
 static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc2_1_enum,	RT1011_TDM1_SET_3, 4,
 	rt1011_tdm_adc_swap_select);
 
+static const char * const rt1011_adcdat_pin_config_select[] = {
+	"Output", "Input"
+};
+static SOC_ENUM_SINGLE_DECL(rt1011_adcdat1_pin_config_enum, RT1011_TDM_TOTAL_SET, 4,
+	rt1011_adcdat_pin_config_select);
+static SOC_ENUM_SINGLE_DECL(rt1011_adcdat2_pin_config_enum, RT1011_TDM_TOTAL_SET, 3,
+	rt1011_adcdat_pin_config_select);
+
 static void rt1011_reset(struct regmap *regmap)
 {
 	regmap_write(regmap, RT1011_RESET, 0);
@@ -1343,6 +1351,8 @@ static const struct snd_kcontrol_new rt1011_snd_controls[] = {
 	SOC_ENUM("I2S ADC DOUT Mode", rt1011_adc_dout_mode_enum),
 	SOC_ENUM("TDM1 DOUT Length", rt1011_tdm1_dout_len_enum),
 	SOC_ENUM("TDM2 DOUT Length", rt1011_tdm2_dout_len_enum),
+	SOC_ENUM("ADCDAT1 Pin Config", rt1011_adcdat1_pin_config_enum),
+	SOC_ENUM("ADCDAT2 Pin Config", rt1011_adcdat2_pin_config_enum),
 
 	/* Speaker/Receiver Mode */
 	SOC_SINGLE_EXT("RECV SPK Mode", SND_SOC_NOPM, 0, 1, 0,
@@ -1859,9 +1869,6 @@ static int rt1011_set_tdm_slot(struct snd_soc_dai *dai,
 		RT1011_TDM_I2S_DOCK_EN_1_MASK,	tdm_en);
 	snd_soc_component_update_bits(component, RT1011_TDM2_SET_2,
 		RT1011_TDM_I2S_DOCK_EN_2_MASK,	tdm_en);
-	snd_soc_component_update_bits(component, RT1011_TDM_TOTAL_SET,
-		RT1011_ADCDAT1_PIN_CONFIG | RT1011_ADCDAT2_PIN_CONFIG,
-		RT1011_ADCDAT1_OUTPUT | RT1011_ADCDAT2_OUTPUT);
 
 	snd_soc_dapm_mutex_unlock(dapm);
 	return ret;
@@ -2207,6 +2214,11 @@ static void rt1011_calibration_work(struct work_struct *work)
 
 	/* initial */
 	rt1011_reg_init(component);
+
+	/* set ADCDAT to output mode */
+	snd_soc_component_update_bits(component, RT1011_TDM_TOTAL_SET,
+		RT1011_ADCDAT1_PIN_CONFIG | RT1011_ADCDAT2_PIN_CONFIG,
+		RT1011_ADCDAT1_OUTPUT | RT1011_ADCDAT2_OUTPUT);
 }
 
 static int rt1011_i2c_probe(struct i2c_client *i2c,
-- 
2.23.0

_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux