SSC driver allows only synchronous TX and RX. In slave mode for BCLK
it uses only one of TK or RK pin, but for LRCLK it configured separate
inputs from TF and RF pins. Allow configuration with common FS signal.
Signed-off-by: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
---
v2: use alternate DT binding
split DT and drivers/misc changes
---
sound/soc/atmel/atmel_ssc_dai.c | 26 ++++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index 48e9eef34c0f..035d4da58f2b 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -605,14 +605,32 @@ static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
return -EINVAL;
}
- if (!atmel_ssc_cfs(ssc_p)) {
+ if (atmel_ssc_cfs(ssc_p)) {
+ /*
+ * SSC provides LRCLK
+ *
+ * Both TF and RF are generated, so use them directly.
+ */
+ rcmr |= SSC_BF(RCMR_START, fs_edge);
+ tcmr |= SSC_BF(TCMR_START, fs_edge);
+ } else {
fslen = fslen_ext = 0;
rcmr_period = tcmr_period = 0;
fs_osync = SSC_FSOS_NONE;
- }
- rcmr |= SSC_BF(RCMR_START, fs_edge);
- tcmr |= SSC_BF(TCMR_START, fs_edge);
+ if (ssc->lrclk_from_tf_pin) {
+ rcmr |= SSC_BF(RCMR_START, SSC_START_TX_RX);
+ tcmr |= SSC_BF(TCMR_START, fs_edge);
+ } else if (ssc->lrclk_from_rf_pin) {
+ /* assume RF is to be used when RK is used as BCLK input */
+ /* Note: won't work correctly on SAMA5D2 due to errata */
+ rcmr |= SSC_BF(RCMR_START, fs_edge);
+ tcmr |= SSC_BF(TCMR_START, SSC_START_TX_RX);
+ } else {
+ rcmr |= SSC_BF(RCMR_START, fs_edge);
+ tcmr |= SSC_BF(TCMR_START, fs_edge);
+ }
+ }
if (atmel_ssc_cbs(ssc_p)) {
/*
--
2.20.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
