On Thu, 15 Aug 2019 03:38:24 +0200, <jeronimo@xxxxxxxxxxxxx> wrote: > > From: Jeronimo Borque <jeronimo@xxxxxxxxxxxxx> > > "enabled" parameter historically referred to the device input or > output, not to the led indicator. After the changes added with the > led helper functions the mic mute led logic refers to the led and not > to the mic input which caused led indicator to be negated (Mic mute > led was on when the input enabled) Fixing it in the call to > cxt_update_gpio_led at the cxt_gpio_micmute_update hook. > Maybe more changes are required to be consistent everywhere. > > Signed-off-by: Jeronimo Borque <jeronimo@xxxxxxxxxxxxx> Could you check which value you have in "Mic Mute-LED Mode" mixer element? I guess it's "Follow Mute". If so, change it to "Follow Capture". If this works, it means that the driver works as expected but the problem is only about the default value. The default value set in the generic parser is based on other machine's standard (LED on at mic off), while some machines might expect differently. On such machines, we need to set the different value initially in the quirk fixup. thanks, Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
