Re: [PATCH v5 04/15] ASoC: sun4i-i2s: Support more formats on newer SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 14 Aug 2019 at 13:08, Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote:
>
> On Wed, Aug 14, 2019 at 08:08:43AM +0200, codekipper@xxxxxxxxx wrote:
> > From: Marcus Cooper <codekipper@xxxxxxxxx>
> >
> > There is a need to support more formats on the newer SoCs(H3 and later).
> > Extend the formats supported to include DSP_A and DSP_B modes.
> >
> > Signed-off-by: Marcus Cooper <codekipper@xxxxxxxxx>
> > ---
> >  sound/soc/sunxi/sun4i-i2s.c | 87 +++++++++++++++++++++++++++----------
> >  1 file changed, 63 insertions(+), 24 deletions(-)
> >
> > diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
> > index 34f31439ae7b..3553c17318b0 100644
> > --- a/sound/soc/sunxi/sun4i-i2s.c
> > +++ b/sound/soc/sunxi/sun4i-i2s.c
> > @@ -27,6 +27,8 @@
> >  #define SUN4I_I2S_CTRL_MODE_MASK             BIT(5)
> >  #define SUN4I_I2S_CTRL_MODE_SLAVE                    (1 << 5)
> >  #define SUN4I_I2S_CTRL_MODE_MASTER                   (0 << 5)
> > +#define SUN4I_I2S_CTRL_PCM                   BIT(4)
> > +#define SUN4I_I2S_CTRL_LOOP                  BIT(3)
> >  #define SUN4I_I2S_CTRL_TX_EN                 BIT(2)
> >  #define SUN4I_I2S_CTRL_RX_EN                 BIT(1)
> >  #define SUN4I_I2S_CTRL_GL_EN                 BIT(0)
> > @@ -91,6 +93,9 @@
> >  /* Defines required for sun8i-h3 support */
> >  #define SUN8I_I2S_CTRL_BCLK_OUT                      BIT(18)
> >  #define SUN8I_I2S_CTRL_LRCK_OUT                      BIT(17)
> > +#define SUN8I_I2S_CTRL_MODE_RIGHT_J                  (2 << 0)
> > +#define SUN8I_I2S_CTRL_MODE_I2S_LEFT_J                       (1 << 0)
> > +#define SUN8I_I2S_CTRL_MODE_PCM                              (0 << 0)
> >
> >  #define SUN8I_I2S_FMT0_LRCK_PERIOD_MASK              GENMASK(17, 8)
> >  #define SUN8I_I2S_FMT0_LRCK_PERIOD(period)   ((period - 1) << 8)
> > @@ -164,6 +169,7 @@ struct sun4i_i2s_quirks {
> >
> >       s8      (*get_sr)(const struct sun4i_i2s *, int);
> >       s8      (*get_wss)(const struct sun4i_i2s *, int);
> > +     int     (*set_format)(struct sun4i_i2s *, unsigned int);
> >  };
> >
> >  struct sun4i_i2s {
> > @@ -194,6 +200,7 @@ struct sun4i_i2s {
> >
> >       unsigned int    tdm_slots;
> >       unsigned int    slot_width;
> > +     unsigned int    offset;
> >  };
> >
> >  struct sun4i_i2s_clk_div {
> > @@ -484,19 +491,14 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream,
> >                                     i2s->slot_width : params_width(params));
> >  }
> >
> > -static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
> > +static int sun4i_i2s_set_format(struct sun4i_i2s *i2s, unsigned int fmt)
> >  {
> > -     struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai);
> >       u32 val;
> > -     u32 offset = 0;
> > -     u32 bclk_polarity = SUN4I_I2S_FMT0_POLARITY_NORMAL;
> > -     u32 lrclk_polarity = SUN4I_I2S_FMT0_POLARITY_NORMAL;
> >
> >       /* DAI Mode */
> >       switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
> >       case SND_SOC_DAIFMT_I2S:
> >               val = SUN4I_I2S_FMT0_FMT_I2S;
> > -             offset = 1;
> >               break;
> >       case SND_SOC_DAIFMT_LEFT_J:
> >               val = SUN4I_I2S_FMT0_FMT_LEFT_J;
> > @@ -505,32 +507,64 @@ static int sun4i_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
> >               val = SUN4I_I2S_FMT0_FMT_RIGHT_J;
> >               break;
> >       default:
> > -             dev_err(dai->dev, "Unsupported format: %d\n",
> > -                     fmt & SND_SOC_DAIFMT_FORMAT_MASK);
> >               return -EINVAL;
> >       }
> >
> > -     if (i2s->variant->has_chsel_offset) {
> > -             /*
> > -              * offset being set indicates that we're connected to an i2s
> > -              * device, however offset is only used on the sun8i block and
> > -              * i2s shares the same setting with the LJ format. Increment
> > -              * val so that the bit to value to write is correct.
> > -              */
> > -             if (offset > 0)
> > -                     val++;
> > -             /* blck offset determines whether i2s or LJ */
> > -             regmap_update_bits(i2s->regmap, SUN8I_I2S_TX_CHAN_SEL_REG,
> > -                                SUN8I_I2S_TX_CHAN_OFFSET_MASK,
> > -                                SUN8I_I2S_TX_CHAN_OFFSET(offset));
> > +     regmap_field_write(i2s->field_fmt_mode, val);
> > +
> > +     return 0;
> > +}
> > +
> > +static int sun8i_i2s_set_format(struct sun4i_i2s *i2s, unsigned int fmt)
> > +{
> > +     u32 val;
> >
> > -             regmap_update_bits(i2s->regmap, SUN8I_I2S_RX_CHAN_SEL_REG,
> > -                                SUN8I_I2S_TX_CHAN_OFFSET_MASK,
> > -                                SUN8I_I2S_TX_CHAN_OFFSET(offset));
> > +     /* DAI Mode */
> > +     switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
> > +     case SND_SOC_DAIFMT_I2S:
> > +             i2s->offset = 1;
> > +     case SND_SOC_DAIFMT_LEFT_J:
> > +             val = SUN8I_I2S_CTRL_MODE_I2S_LEFT_J;
> > +             break;
> > +     case SND_SOC_DAIFMT_RIGHT_J:
> > +             val = SUN8I_I2S_CTRL_MODE_RIGHT_J;
> > +             break;
> > +     case SND_SOC_DAIFMT_DSP_A:
> > +             i2s->offset = 1;
> > +     case SND_SOC_DAIFMT_DSP_B:
> > +             val = SUN8I_I2S_CTRL_MODE_PCM;
> > +             break;
> > +
> > +     default:
> > +             return -EINVAL;
> >       }
> >
> > +     /*
> > +      * bclk offset determines whether i2s or LJ if in i2s mode and
> > +      * DSP_A or DSP_B if in PCM mode.
> > +      */
> > +     i2s->variant->set_txchanoffset(i2s, 0);
> > +     i2s->variant->set_rxchanoffset(i2s);
> > +
> >       regmap_field_write(i2s->field_fmt_mode, val);
>
> It's a bit more complicated in the sun8i case. The LRCK period also
> needs to be changed when in PCM / DSP_* mode since it changes from a
> number of periods for one channel to a number of periods for all the
> channels.
Yeah I was thinking that but I don't have any hardware to test this with (been
helping out someone trying to connect to a modem).
>
> I have patches that still need a bit of rework and take care of all of
> that, I'll try to post them by the end of the week

This patch could be dropped for now or at least we just keep the
offset parts in.
BR,
CK

>
> Maxime
>
> --
> Maxime Ripard, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux