Hi, may I ask for help with cards/bcm2835.conf for the new RPi? No
such config exists yet:
pi@raspberrypi:~ $ strace -f aplay -L 2>&1 | grep -i bcm2835
access("/usr/share/alsa/cards/bcm2835_alsa.conf", R_OK) = -1 ENOENT
(No such file or directory)
I understand the _alsa suffix is handled in aliases (e.g.
https://www.raspberrypi.org/forums/viewtopic.php?t=221734#p1361104 )
The reason I am looking for this file are Pulseaudio profiles. PA
requires front:X, surroundX, hdmi:X, etc. PCM devices, yet non of
these are created due to the missing card config:
pi@raspberrypi:~ $ aplay -L
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
jack
JACK Audio Connection Kit
pulse
PulseAudio Sound Server
sysdefault:CARD=ALSA
bcm2835 ALSA, bcm2835 ALSA
Default Audio Device
dmix:CARD=ALSA,DEV=0
bcm2835 ALSA, bcm2835 ALSA
Direct sample mixing device
dmix:CARD=ALSA,DEV=1
bcm2835 ALSA, bcm2835 IEC958/HDMI
Direct sample mixing device
dsnoop:CARD=ALSA,DEV=0
bcm2835 ALSA, bcm2835 ALSA
Direct sample snooping device
dsnoop:CARD=ALSA,DEV=1
bcm2835 ALSA, bcm2835 IEC958/HDMI
Direct sample snooping device
hw:CARD=ALSA,DEV=0
bcm2835 ALSA, bcm2835 ALSA
Direct hardware device without any conversions
hw:CARD=ALSA,DEV=1
bcm2835 ALSA, bcm2835 IEC958/HDMI
Direct hardware device without any conversions
plughw:CARD=ALSA,DEV=0
bcm2835 ALSA, bcm2835 ALSA
Hardware device with all software conversions
plughw:CARD=ALSA,DEV=1
bcm2835 ALSA, bcm2835 IEC958/HDMI
Hardware device with all software conversions
usbstream:CARD=ALSA
bcm2835 ALSA
USB Stream Output
As a result, only the Analog Mono PA profile (based on the only
existing hw:0) is available in PA:
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:0
...
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo
(analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM front:0
---
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo
(HDMI) (hdmi-stereo)
D: [pulseaudio] alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
...
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital
Surround 7.1 (HDMI) (hdmi-surround71)
D: [pulseaudio] alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
RPi v.4 has 2 HDMI outputs:
pi@raspberrypi:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
Subdevices: 6/7
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835
IEC958/HDMI1]
Subdevices: 1/1
Subdevice #0: subdevice #0
Each is 2 - 8 channel:
pi@raspberrypi:~ $ aplay -v --dump-hw-params -D hw:0,1 /dev/zero
Playing raw data '/dev/zero' : Unsigned 8 bit, Rate 8000 Hz, Mono
HW Params of device "hw:0,1":
--------------------
ACCESS: MMAP_INTERLEAVED RW_INTERLEAVED
FORMAT: S16_LE
SUBFORMAT: STD
SAMPLE_BITS: 16
FRAME_BITS: [32 128]
CHANNELS: [2 8]
RATE: [44100 192000]
PERIOD_TIME: [10000 743039)
PERIOD_SIZE: [441 32768]
PERIOD_BYTES: [1776 524288]
PERIODS: [1 75)
BUFFER_TIME: (2296 743039)
BUFFER_SIZE: [441 32768]
BUFFER_BYTES: [1764 131072]
TICK_TIME: ALL
I looked at hdmi section of cards/Intel-HDA.conf but that one is very
complicated. May I ask for help how the config should look like to
work both for multichannel PCM and digital formats (i.e. support for
the AES vars)? I very much appreciate any help.
Best regards,
Pavel.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
