From: Libin Yang <libin.yang@xxxxxxxxx> This patch call snd_jack_add_new_kctl() to create the HDMI jack kctls. Userspace needs these kctls to detect the hdmi monitor hotplug. In /usr/share/alsa/ucm, the config file needs to assign a jack kctl to "JackControl" to let PA get the jack hotplug status. Signed-off-by: Libin Yang <libin.yang@xxxxxxxxx> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx> --- This patch has been used by SOF-based solutions delivered in Q2 but due to a confusion on my side was not upstreamed. Both Libin and Kai confirmed it's required for PulseAudio to track jack events. sound/soc/intel/boards/skl_hda_dsp_common.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/intel/boards/skl_hda_dsp_common.c b/sound/soc/intel/boards/skl_hda_dsp_common.c index 55fd82e05e2c..58409b6e476e 100644 --- a/sound/soc/intel/boards/skl_hda_dsp_common.c +++ b/sound/soc/intel/boards/skl_hda_dsp_common.c @@ -147,6 +147,11 @@ int skl_hda_hdmi_jack_init(struct snd_soc_card *card) if (err) return err; + err = snd_jack_add_new_kctl(pcm->hdmi_jack.jack, + jack_name, SND_JACK_AVOUT); + if (err) + dev_warn(component->dev, "failed creating Jack kctl\n"); + err = hdac_hdmi_jack_init(pcm->codec_dai, pcm->device, &pcm->hdmi_jack); if (err < 0) -- 2.20.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
